Recent content by BlackTitanium

I didn't have any problem uncompressing the .rar file for the programmer. I just didn't see the the drop-down menu slider, which was at the bottom 5 options by default. I thought I was counting down 5 options from the top row, but was inadvertently counting down to option 13 from option 9 in the...

Nicole contacted me via email: "Thanks for your time & the details. Here are two likely points where the selection might be off: 1.Did you locate the new COM port? If it's a new port, then it might be the next one... 2.For the garbled text section, select the 5th option. From your screenshot...

I bought both of mine direct, back in March 2024, they had the latest firmware at the time.

My current Firmware version is V6.0C 23F03 trying to update to the latest Version V6.4C 25A09. One of my two gauges seems to have a bug, won't stay on Regulator setting, keeps defaulting to Pro setting. I haven't found any information about the latest firmware version, but thought it might fix...

The Alpha Trigger by Edgun West is a "Coming Soon" item. Also, the posted rendering does not look to be the complete product in my opinion.

The Alpha Trigger by Edgun West is not "Sold Out" it is "Out of Stock"! This product is "Out of Stock" because this is a new "Coming Soon" item. The Alpha Trigger by Edgun West has not yet fulfilled Edgun West's inventory and currently not available for sale.

EDgun Leshiy 2 350mm .177 (4.5mm) Caliber JSB Knockout Slugs 13.43 gr DNT TNC335R ThermNight Thermal & Night Vision Multispectral Scope

What's the technique to "X" them? Looks like it's tapped with a Phillips Driver. Shooting JSB KO 13.4 @ around 872 fps (22.7 FPE) I seem to get too many head shot pass throughs!

There is a 2mm ceramic ball, part #45, behind part #11. Make sure it is not missing or damaged. I replaced #45 with a Tungsten Carbide ball and #14 with a Stainless Steel 4x2mm bead, because those parts can have rough edges. Here's an example of #14:

The REPR-X requires fitting the gauge to the Forward Plug if you want to adjust/monitor the regulator pressure. Unlike the Gen-1 EAR, it is not recommended to leave the gauge attached to the L2 for long term use.

A benefit of getting the Gen-1 REPR is that you can upgrade to the Huma-Air Raptor. Both the REPR and REPR-X have been reported to have the same pressure drift issue. Also, you can install a Regulator gauge on the REPR Plenum, if you like to monitor your regulator pressure.

The Wolfiek Group Limited Edition Leshiy 2 9mms have a custom plenum with a 1st generation Externally Adjustable Regulator (REPR). https://www.edgunleshiy.shop/products/leshiy-2-tuned-by-francisco-9-0?variant=47020020302150

Is this a sub12 tune? What's the FPS?

Sorry for the late reply! For reference: 1. The 1st generation Externally Adjustable Regulator is threaded into the Plenum. 2. The 1st generation EAR has a gauge port, on the Plenum, opposite side of the adjustment cap. 3. The Huma-Air Raptor Regulator can only be installed onto the 1st...

EDgun West has a plethora of Leshiy 2 tutorial videos that will help you to become comfortable at maintenance and repair of your Leshiy 2. https://www.youtube.com/@edgunwestLLC