BlackTitanium's latest activity
9mm is a special setup and your best bet is to buy the 9mm. Downgrading 9mm works. Upgrading to 9mm will be a challenge.- BlackTitanium replied to the thread Head shot thread.EDgun Leshiy 2 350mm .177 (4.5mm) Caliber JSB Knockout Slugs 13.43 gr DNT TNC335R ThermNight Thermal & Night Vision Multispectral Scope
- I didn’t know this was a head shot until I recovered the corpse this morning. My pard was at 2% battery so I had to shoot quick, it...
- Loving the thermnight!
- OUPS !! Too low .. just heartless i tell ya 🫣
- This one was angled so a 25 cal went nose to tail.
- Stock Notos Vs Pocket Gopher...SloMo head shot 18.13gn JSB @ 730 fps / 21 fpe These pocket gophers are leavin craters everywhere!
- Got a couple of big boys the last 3 nights the big one by the ruler is almost 17" which is big for around here and the other one about...
- And a slow motion 🤣
- rat shots are so quick. I thought by the reaction this was a headshot. I verified this morning when I cleaned it out of the feeder that...
- BlackTitanium reacted to Motorhead's post in the thread N/A .177 for slugs (primarily at least)?! with
Like. Better expanding slugs Go to page 1 ;) - BlackTitanium reacted to Rvaughn's post in the thread N/A .177 for slugs (primarily at least)?! with Like. Sorry… late to the .177 slug slinger party. I recently took an old Snowpeak P12 that was .177 and made a carbon fiber wrapped FX liner...
- BlackTitanium replied to the thread N/A .177 for slugs (primarily at least)?!.What's the technique to "X" them? Looks like it's tapped with a Phillips Driver. Shooting JSB KO 13.4 @ around 872 fps (22.7 FPE) I...
- BlackTitanium replied to the thread EDgun Edgun Leshiy 2.There is a 2mm ceramic ball, part #45, behind part #11. Make sure it is not missing or damaged. I replaced #45 with a Tungsten Carbide...
- BlackTitanium reacted to North East Airguns's post in the thread DNT ThermNight 335r/635r Sight in tutorial video with Like. Hey Everyone! With the massive popularity of the DNT Optics night vision scopes we wanted to offer a sight-in tutorial video for you...
