BlackICE's latest activity

If you don't care if they run if you can't recover the corpse, then it doesn't matter what you use as long as you can poke hole through...

Whatever you do don't leave you gun unattended when there are coyotes around. They get even! If you want to make sure one shot one kill DRT

What is the ball made of, metal, plastic, rubber?

You didn't show the aftermath that can last over a minute. With them doing a death dance bouncing all over the place.

Unless your hit the brain, most likely it's going to run off a ways and not DRT. Problem with a brain shot is it much more difficult...

It's not the coyote's fault, it is ours!

If your turrets are not aligned with the reticle you may have a problem if you make dial Corrections for windage or elevation. On...

I have tried just measuring with calipers, eyeballing it. Gets somewhat close but never quite accurate when you put it into a bc...

If you have a 3d printer that can print TPU then... https://www.airgunnation.com/threads/gx-cs4-rubber-diaphragm.1317557/

When filling tanks I filter 3 places not including the compressor's purge system. 1. Regular household compressor to 150 psi. The...

I wonder would it work for raccoons and rabbits?

Put some IR /motioned triggered webcam out there to ID the critters and alert you when to lock and load.

Not everyone using the Forum lives in the united states. Also even if you live in the United States there may be states and local laws...

Andy Grove - "Only the paranoid survive!" I also would like to restore the open air gun moderator discussions as well. I have learned a...

diy, got the tube from Amazon and 3d printed the rest.