Recent content by Bimhiq

That's the issue. I wrote to Rok and he will sell me the springs. And I appreciate that. But Eur 15 plus postage and a 1 or 2 month wait are not economical for 2 springs. I understand that parts cost money. For the reasons above. It's would be great of I can get the dimensions and make one...

Hi @JimD, excellent writing as always. I want to tune down my P35x, 177 to shoot 10 gr ish pellet at about 970 fps max. What reg pressure would you recommend and how do I adjust the reg to get to the recommended pressure? Frequent teardown to adjust stuff will damage the airgun.

Hi everyone, Just dismantled my RTI Prophet 2 and I lost the spring 1 and 2, number 15 and 19 on the part list respectively. We don't have any RTI dealer where I live. I asked RTI for the dimensions and specs on both springs but they rather sold me the spring. My problem is the postage and...

@Pfddi . Thanks for sharing. Wow... So our problem is baddd. I don't have access to anyone who is knowledgeable about RTI. It's not a popular product where I live. I grabbed this from a stock of an importer, and there weren't many. What happened before yours when bad? And.... Anyone? Please.

Well... Anyone?

I don't think so...

Hi everyone, One of the trigger adjustment screws (2nd stage) came loose, so I unscrewed both screws and applied some Loctite. I've been trying to balance the two screws, but I’m having trouble. Either the gun won't cock, or the trigger feels like it's just a single stage all the way through...

Thank you for the insights. really appreciate it. Do you polish or oil to the rest of the parts that would improve the performance and the use comfort?

Does anyone know how to lower the regulator by roughly 5 bar? And what do you usually do to make the P35X feel smoother?

Hi, I recently purchased a Snowpeak P35X and noticed that the cocking lever is advertised as ambidextrous on the website. I would like to relocate it to the left side but have been unable to find any instructional videos on YouTube. Do you have any resources or could someone share their...

In your experience does the slug seating depth makes a difference?

It is and I replaced it too when I disassemble the gun.

I made sure that it's back to the original setting when I reassembled the gun.

Hi, I set up my FX Wildcat MK3 BT 22, 600mm slug liner to the max to try out what's the max speed to shoot different weight slugs. I maxed out the hammer spring preload to max until the gun won't cock and gave it a 1/4 turn in. I kept increasing the reg up to 160 bar or 170 bar (my gauge was...

Hi all, My .177 FX Dreamline comes standard with a 600mm barrel. I have a 700mm liner, and I'm looking just to buy the shroud, but most retailers are offering me a barrel kit. Do any of you know what the part number is for the 700mm shroud or the dimensions so that I can try to find a carbon...