Bigbaby's latest activity

I bought a screw in double spinner on Amazon to replace my old one that was bending from pellet strikes. This one from Do All Outdoors...

Thanks. The difference in our usages may only be that I typically shoot 4 or 5 guns at the range, so the probes need to be separated...

For me, I’d rather not be disconnecting and reconnecting the probe with the quick connect, it’s always attached to the whip and ready...

I printed a 3D plug that I leave in the port until I’m ready to refill. With the Tactical you can fill from either side, so I just push...

If you put it on thingiverse careful how you label it. I might use "xyz mm fill probe dust cover." Well done!

I was looking for one but didn’t like the design or price on a piece of plastic with a hole in it. It was pretty simple, just needed a...

I was concerned about my fill probe getting dirty sitting exposed while target practicing, so I designed a 3D dust cover. It fits...

Cool, I appreciate your offer. My two bottles are different sizes, so I adapated your idea to a universal design that will fit my...

My design is based on a 3l carbon fiber bottle. The cradle is a couple of millimeters larger than the radius of the bottle and is a...

I measured my fill probe on the DRS Tactical and 3D printed a cover. It’s tight on the metal next to the whip and secure, but loose at...

Hi Folks, I’ve been working for a while on solving the slow first shot issue in the FX DRS. I’ve done various tests and tried different...

Evidently this gun really likes this tune. I shoot 1” paper dots stuck to gongs at 55, 60 and 75ds; today I was hitting the dots at...

I uploaded a 3mf file to thingiverse that should be able to download straight to the slicer.

I watched a tutorial on YouTube, and paused and replayed until it finished my cradle. There is a learning curve but it’s kind of fun...

I would skip buying a budget pcp and go straight for the good stuff.