Beeman22's latest activity

Gehmann says to run it through an ultrasonic bath. https://www.targettalk.org/viewtopic.php?t=50299

I did a ton of googling on this but never found this thread - thanks!! I'll have to give that a try.

Hey KSK, In hindsight, I may have misread the Ace box top containing the gun screws sizes (Edit 8-40 & 10-32 see pic below). I simply...

- These screws (8-40 x1/8, 10-32 x 1/8) cost $1.19 & $1.49 respectively at Ace Hardware, hence each gun will cost less than $4.50 using...

Nicely done - this looks like the cleanest currently available option I have seen - I need to go see if my Ace has these!

Back in the day, Weihrauch furnished simple flush-fitting blued grub screws for HW 55's, or other rifles sold sans breech-mounted...

Ace hardware sells gun smith screws. I have had good results using their slotted blued grub screws that are slightly undersized. The...

It was windy. An inch one way or the other. Miserable shooting weather past 25 yards. It calmed down to nothing and suddenly I was...

Are they usually epoxied on? Can you remove with moderate heat? Anyone know? I have a mint 300 and would love to get the sleeve off...

I'm with John on this one. Nicely done! Is the action cerakoted or something of that ilk?

Most casual shooters don't know what ideal fit is about. They use them as is not knowing any better. Most people and myself don't have a...

I think it's a nice looking gun and concept. The only hitch I see might be the trigger reach. With out it in hand it's hard to tell if...

Like all WIERDRAUCHS. . They make the finger to trigger far to long for any shooter to properly shoot. Let alone a child. It will be a...

My wipe-down rag is an ancient, tattered Beeman "silicone" cloth...which has been drenched in Ballistol for the last decade or so. I...

I used remoil for years because it was easy and left the bluing protected without looking streaky or oily. But I think there are some...