Bear-of-Grayling's latest activity

I have the CMP model . My Trigger is ok . A stiff trigger , single stage but a wall at first touch then a very smooth pull (maybe 4...

the biggest problem with the trigger is the hammer spring is connected to the trigger i have a 853 apart and for the life of me i...

What are the differences between 753 and 853?

If so inclined, a billet pump lever wouldn't be too bad to get made at a machine shop... At least if its like the one on my 880 silver.

Yes. The hammer spring drives the system. The “lawyer “ spring under the sear can be removed. The spring from the trigger to the piece...

Thank you. I appreciate all this info. This could be a fun summer project. I think I’ll probably sand and refinish the stock while I’m...

How complicated is the trigger work? I have an 853 from the CMP and the trigger is terrible. I like the rifle but with that trigger any...

I may have gotten incorrect information. The pumping lever on the current 753S (synthetic) (Wood model discontinued) may still be cast...

Not complicated at all. Here is a step by step guide. I also ordered a new trigger guard, trigger, sear etc. (Parts needing to be...

I recently picked up this Daisy Avanti 753W. New old stock. Trigger was horrible. Over 10 pounds. Did the complete trigger job which...

I lost track of shots, so I cant figure out the score. I kept going until I started getting wild hits. Crossman 1377, Probably got...

I took out my HW30 .177 this evening for a little target work off the bench. I have a newbie on the hook and he’s just about ready to...

@Bear-of-Grayling , I loved learning how you compensate for pressure with change of pellet weight/type

Just got my FWB 603 back from David Slade after a fresh rebuild. Oh what a sweet shooting 10m rifle! At 12 yards - Shot 3 through a...

Exactly the same