Recent content by BDX

Are all these groups shot with same reg pressure and valve flow control (VFC) settings on your Impact. Not knowing your own tuning process I can only relate that AirGunner Bob, a really good long range "slugmaster" found that for best performance he tuned for each slug and weight, Once he had...

Interested in an FX Crown synthetic stock. Appearance not much of an issue as long as it is able to accept the action. 

Man I hope so too and thanks! 

Outstanding news Wiseguy. Could you tell me how long you had yours before the failure? and a guesstimate of how many fills you got prior to failure? Personally I was out of the country when mine was delivered mid-May and has sat in its box waiting to be broken out...Apparently Bob's failed...

Bob after seeing this I retract my Instagram question about the burst disc. Was this power reset issue from the get go or did it develop over time? The fact that it had to be powered off then back on makes me think that the reset function logic, perhaps on the motherboard, is/was a bit wanky and...

Stoti is spot on. I always try with OEM vendor first. Surprising and pleasant results for the vast majority of those calls. If you’re insistent on trying to find the part try Mouser.com. They sell a ton of electronics components. May not be a name match but often times they’re based on the same...

Chuck Isn't that velocity/pellet combination worth verifying?...Particularly if it's a simple reg adjustment. I mean you have a boat load of the suckers...Didn't Edosan shoot these at 950fps with decent results?

I think the “issue” of regulator creep is largely blown out of proportion. 

My Magic 8 ball just floated up its answer, “the slug shooter verified, is a .22 to buy, after all by Bob_O it’s been tried” 

Well so much for 100yds. I’d like to see that lower velocity hypothesis tested and compare your previous groups at 50yds with that slower velocity. For now guess you better like shooting those at 50 yards/930 FPS considering how many tins you’ve got on hand. 

and if one is serious about that one should probably invest in a couple of standard test weights to check scale sensor drift...

Chuck, Got that 100 group yet? 

AL, Were you able to verify the thread on the rifle? Maybe check with FX USA? It just seems odd to me that 1/8” BSP thread would be used on a gun in (what I imagine) in all other respects is entirely metric. The fact you mentioned having read a put mismatched threads would definitely spur me...

Kevin, Bitey’s point’s we’ll taken; any similarly sized USB bank will work. Get at least the same mili amp hour spec LabRadar offers. 

Chuck I'd love to see some 100 yard groups with that .30.