bchannell's latest activity
I have two Frontier scopes, both 1" tubes, a 4-20x44 and a 3-15x44. Look like same scope size & weight etc. They have great lenses and...- I had gotten a UTG 3-12x compact and liked it so much I bought another Compact OP3 model, which is a step up. When it arrived it was...
- I have a nearly new 380mm 177 Crown barrel to trade. No problems, I just have way too many Crown barrels and this one is just laying...
- bchannell replied to the thread Flubbed on my Foray with Burris XTR Signature Scope Rings.How does it affect parallax?
- bchannell replied to the thread FX impact x trigger help please.There's a pin that does nothing but keep the sear from rotating too far, could it be above/below the sear blocking it? I've locked mine...
- bchannell replied to the thread FX FX Impact - 1st stage regulator to delete or not - my study..I've not deleted the 1st stage per sey but I have opened it way up as far as it will go and used the gun. I didn't see much difference...
- bchannell replied to the thread Hornets nest.I waited til night and sprayed a whole can of wasp killer in the hole. By the time the can was empty they dropped out in clumps of dead...
- bchannell replied to the thread The "Ticking Time Bomb" Collection: How I'm Simplifying and Going Back to Basics.This hobby just seems to sneak up on you and you get too much stuff. I like simple, so when at one time I had over 15 airguns, I decided...
- bchannell replied to the thread Trigger issues with the Fx Streamline.Ok here's my question. I've worked on literally hundreds of triggers, powder burners and airguns. BUT, a while back I bought a Boss...
- bchannell replied to the thread FX impact x trigger help please.Sear in upside down?
- bchannell replied to the thread how to check the humidity at the output of hand pump ?.The hotter the air the more moisture it can hold ASSUMING THE SAME PRESSURE. This is the premise for water seperator filters like the...
- bchannell posted the thread FX FX barrel liner twist rate....for the umpteenth time? in PCP Airguns.I was looking over my liners and noticed that my Crown 177-380mm pellet liner is 1:28 twist?? No mention anywhere I can find of this...
- bchannell replied to the thread how to check the humidity at the output of hand pump ?.There's a common misconception that slow pumping will cause less moisture. Look at it this way. There's a finite amount of moisture in...
- bchannell replied to the thread Gx filter is here.I get water out of mine after a fill. I've opened the filter after a fill and seen...I dunno maybe a 1/4 of a thimble full of water in...
- bchannell replied to the thread In line moisture filter.I've been trying out the new GX filter and it's pretty impressive. It's the real deal. We've had horrible humidity to test it in lately.
