bchannell's latest activity
bchannell replied to the thread FX Impact m3 leak from mystery spot ?.Nothing wrong with the new AMP reg's, I don't see any improvement with HUMA, although I do use HUMA, whatever I have available. If I had...- bchannell replied to the thread FX FX guns WITHOUT POI Shift Issues.I have a Crown mk2, Dream Tac and a Wildcat and no problems. I did have an Impact M3 that suffered from the valve sticking and the first...
- bchannell replied to the thread Will dry air dry out occassional moisture intrusion.I have a set of tools to take the valve off of cf air cylinders such as FX and I'm sure it'll work for many others. Every year or so, I...
- bchannell replied to the thread Pellets verses slugs.I have a Dream Tac 25 that shoots Kings ammmaaaazingly well, and I just can't imagine slugs doing a whole lot more. At 100 yards, it'll...
- bchannell replied to the thread Pellet Groups at 100 yards.I think MOA is a good place to hang your hat. I know it sounds funny, but when I shoot 100 yards, I'm usually shooting off the bed of my...
- I have/had quite a few Hawke scopes and never been disappointed with them. Some Frontiers, Vantage, Sidewinders and Airmax. All have...
- bchannell replied to the thread Jts dead center pellets.I choose them over JSB every time. The 25gr 22 cal shoot fantastic in my rifles
- bchannell replied to the thread FX Wildcat consistency problems.Yes, if I do need to use the screw and dial it in. That is next on the list. I had to mow all day, so the cuts into my shooting time...
- bchannell replied to the thread FX Wildcat consistency problems.Could be, i dunno, some of it looks fine. My question is if I back it down 3-5%, that puts me in the 960 fps range, where the es is much...
- bchannell replied to the thread FX Wildcat consistency problems.OK, I admit my head is hard. I thought I was starting somewhere in the middle and working both ways, but until someone challenged me, it...
- bchannell replied to the thread FX Wildcat consistency problems.Yes, I tried both ways up and down. I've picked spots along the way and went from bottom to top of hammer strike. The hammer is factory...
- bchannell replied to the thread FX Wildcat consistency problems.I've been using a Garmin chrono so I decided to drag out my Crown and try it to verify that's not a problem. I haven't fired the Crown...
- bchannell replied to the thread FX Wildcat consistency problems.Here's the string. I started all new 1st reg at 145 bar, 2nd reg at 105 bar, hammer on 6, screw out one turn. Virtually no change from...
- bchannell replied to the thread FX Wildcat consistency problems.Still trying to move forward. Today, I checked: * the hammer for marks where the sear engages. No marks, it looked like new, and very...
- bchannell replied to the thread FX FX Impact Tuning Conundrum......The macro wheel is kind of confusing at first. The micro is always where your hammer is actually at. The numbers on the side are really...