barreira's latest activity
- Bbarreira reacted to JaceSpace1369's post in the thread EDgun Leshiy Classic won't bleen air with
Like. I love mine as well, the fact that you can make it what you want in 5mins of less with just a set of hex keys is nothing short of amazing. - Bbarreira reacted to PasadenaMike's post in the thread EDgun Leshiy Classic won't bleen air with Like. That’s why mine stays , no 400 knobs to turn
- Bbarreira replied to the thread AirMaks Arms Take a look at this little critter getter!.That's why you need an accessable regulator. NOT possible in this gun if you want to increase power/efficiency. This gun was designed...
- Bbarreira replied to the thread AirMaks Arms Krait Lite?.@MACTEN, sent you a PM.
- Bbarreira replied to the thread AirMaks Arms Krait Lite?.They told me that the tool to remove the regulator cost 650€. So, it's not easy for sure. And if you want maximum efficiency it's...
- Bbarreira replied to the thread AirMaks Arms Krait Lite?.According to Air Maks the regulator IS NOT accessible. I believe this model was designed for the UK market where most of airguns don't...
- Bbarreira replied to the thread AirMaks Arms Krait Lite?.I almost bought a Krait Lite, but knowing that is not possible to access the regulator, I stepped back. To achieved maximum efficiency...
- BI waited for the solid butt version too but ended up just getting married anyway.
- Bbarreira replied to the thread Standardized Moderator Testing (free), Discussion Thread.I think this guy is trying to do that, but withou the digital stuff:
- Bbarreira reacted to Firewalker's post in the thread Umarex NOTOS Owners and modifications: with Like. Because it's SO FUN! 🤣😍😆😁
- Bbarreira replied to the thread Tuning To Crown or not to Crown, that is the question!.Ok, thank you very much.
- Bbarreira reacted to Sharp Pog's post in the thread Tuning To Crown or not to Crown, that is the question! with Like. After he makes the cuts, have him take a very fine piece of emery cloth and press it into the crown with his finger tip to polish it...
- Bbarreira replied to the thread Tuning To Crown or not to Crown, that is the question!.He's a profissional lathe machinist but he is not a gunsmith. I have to give him your advices about the crowning.
- Bbarreira replied to the thread Tuning To Crown or not to Crown, that is the question!.I might try that. I have a friend with a lathe.
- Bbarreira replied to the thread Tuning To Crown or not to Crown, that is the question!.I will start with the brass screw, and then we'll see it... Thank you to all of you.