Back_Roads's latest activity

Possibilities that come to mind: Damaged O-ring – When the piston cycles, the O-rings break free momentarily and then have to resettle...

Which is why I have various assortment kits of orings. I have a lot of guns using different orings so I try to cover the gamut...

I made a tool to disassemble a Marksman 45 made by Norica out of an iron pipe nipple. I bought the nipple for $2.50 and turned it to a...

Well, since I'm still me I would probably do the same things I did the first time... :confused:

I had the over pressure valve off the twin filters vibrate loose on my unit, fill times seemed to get slightly longer, but still fast...

It sounds like you needed well over 21 years. I have been playing with them, the good ones, for over 40years, and I started with pcps 35...

Are you saying the bottle is loose under pressure or only when empty. I should have the parts to fix the shroud or possibly just walk...

This is 100% correct information. You tighten the bottle all the way in and then only back it off far enough to align the fill nipple...

My Hammer had a leak that I took apart and replaced lower seal on reg. When I reassembled and lined up fill port and gage the tank had a...

If there is a fill fitting that aligns with a cut out in the bottle guard/frame ? yes the bottle will wobble until such time as it gets...

Here are two of my little walkabout beasties… The Pathfinders scope has been downsized to make it handier…

I don't do walk abouts much but when I do I am happy with my NOTOS. Light and compact and 35 accurate shots plenty strong enough for...

I will be getting back to making a repair video for the Pinty Carbine rifle. Work is busy so this is my limited play time.

4th season with the .457 Piledriver :sneaky:

Havent posted on here in awhile. Figured Id share my latest boredom. I wanted to ditch the tank as I favor tube guns. So I adapted a aea...