Aslap's latest activity

Dingens, Today I adjusted the HS on my 25 grain pellets with the HI TP setting It did take a bit more HS to get to the knee than I had...

Ding, I have 25 yards in my backyard and do most of my airgun shooting there. I had never tried using the LO transfer port setting and...

Trucker, There is certainly more than an even chance that I am blowing this out of proportion. With the TP on HI and using decent 25...

Avenge X tube version. HN Field Target Trophy pellets at 20 gr. Reg set (I think) at 150B. Transfer port set to LO. Started at full fill...

Mike, Here they be. Tony...

Mike, Good luck! I think this might be a good choice! Tony

Rev, Just get on the Swagelok site and look for VCR fittings. You would wind up putting one fitting on the line side and another on the...

Both of those look like ferrules for a compression fitting. If repeated breakdown is required, maybe move to a VCR firming the uses a...

Rev, And you are 100% correct on the Swagelok‘s inability to be broken down and put back together multiple times. Good luck in your...

If the idea is to hold that 1/8” tubing into the pump, would a Swagelok compression fitting be a substitute? If that barrel piece has...

Just as a follow up and ending to the story, the M10 to Foster adapter came with a Dowty washer. I installed that; snugged it up; bada...

Is the Foster fitting on the Avenger like the one on the X? Mine looks to be a custom thing that allows the cap to be screwed onto it. A...

Bubba, The fitting that came with the filter was identified as a M10-1. The adapter I ordered is a M10-1 threaded to the the Foster...

I just picked up one of the bigger cyclone filters to use with my Gx CS2 pump. I have an Avenge X tube so the filter has tripled the...

I have an Avenge X and get constant leaks out of the Foster fill fitting. It’s a slow one but I take the fitting out; clean out the shut...