anirudh's latest activity

On last Friday I pull out my Redwolf just to take a couple of shots and notice that air pressure was very low but when I place it in...

My MK3 is about 8 years old. I haven't used it a lot, but grease the main tube 2x a year with silicone grease, and change the dry pac as...

So a bunch of things to correct and de-bunk ...( did not read all responses, just a couple ) First,...tank/tube size does not matter ...

about 64 pumps to achieve 220 bars after starting from 140 bars for my huntsman classic (114 cc air tube) with a hills mk 3...completed...

here are some aftermarket options...are they really accurate than the stock gauge

my hills mk 3 started to pump back..so was forced to replace the last stage o ring.i have changed 5 o rings of the last or 3rd stage(see...

Just referring to the compression of the rings between the ID and OD, not air compression. Slightly larger (1.78 vs 1.69 as measured...

where can a WIKA 250 bar gauge be sourced for my huntsman classic from?The current gauge as shown is about 23 mm dia with 1/8 BSPP...

compression?you mean inside the pump

i think you are right...this is the approx size courtsey the OLYPSYS android free app...0005 size is the nearest best measure.are these...

you mean dash sizes 5,6 or 7?.a new o ring with me measure OD 5.85,CS 1.69 and ID 2.34 mm using a electronic vernier which frankly...

Hill doesn't publish the sizes and in 10+ years of activity in the online airgunning community, I have found only passing mention from...

that link shows 6 sizes of O rings...which one is correct

Hi...any idea where can these green o rings be brought from...exclusively.whats hills calls Ring No 17 for the mk 3 pump.thanks