Alejandro91's latest activity

looking good!

Hi, I would get the 800mm barrel as this will help increase the velocity for the heavier slugs, the 700mm its that little bit shorter so...

I guess those Zan's at 150bar are going 960-980fps? .33gr .217 or .218? Las week I orders some .217 33gr zan, seen some threads that...

Hey fellow down under shooter. 🙂 I’ve got the same rifle and had similar queries so emailed Zan direct. His reply was aim for around...

what reg pressure is sweet spot for 1040 fps for 38-40gr on a 700mm

Call me a sissy if you wish, but my M3 shows 250 bar on the side of the block, so no go to 300 bar for me. HPA is nothing to mess with...

Rifle now ready....thanks all for the replys and comments, Problem solved!

Maybe put the gun upside down with the barrel in a vice WITH PADDED OR SOFT JAWS and with a small piece of wood, tap straight back on...

The front collar is very tight. Sometimes the oring that sits there will twist and 'freeze' the housing in place. It takes what I...

To be safe I would replace the barrel orings, Sometimes the plenum orings on the trigger group side can get nicked when installing the...

I read old post from this forum, and it leaked because it had no air on plenum and i changed the hammer spring, so i installed the tank...

i already removed ir with small taps with brass stamp, it made a small "pop" sound when it got unstuck, I already installed hammer...

I already did everything is just the barrel shroud I already removed barrel and carbon fiber liner, I never use locktite

I already tray hit several hits with a brass puncher and it's locked in tight

Barrel stick stuck, I have already remover saber tactical rail and screw and still barrel doesn't come put