AlanMcD's latest activity

When you pull back the bolt, you are pulling the hammer rearward until it sets against the sear. At that point (at least once the bolt...

Do you have a molecular sieve in the filter loop? OR even two of them, I have one as the 3rd filter, my first filter appears to catch...

Even 1% relative humidity at atmospheric pressure will result us 100% humidity at 3000 psi. If you wants dry air, you need a water trap...

Look at the fourth photo of the male fitting - it includes a one way fitting held in place by a spring and a retainer. With that in...

Well, I tried to mediate a bit . . . I observed a slow decent into a lack of civility and thought I could help. But your reply to my...

Allow me to intervene a bit here . . . I think Scott is not willing to say a few things that would help you understand, and you are...

I always level my scope using a mirror. The line of the elevation needs to be centered to the bore. If that is done, mount a level that...

I think it should have come with one, but at least almost everything is online these days . . . ...

Yeah, the sole purpose of the one I use is to keep anything but water/vapor from getting to the sieve filter.

That looks like the same unit, and yes those are the filters. They are an absorbent filter, so they are great at stopping solids and...

What is the outer diameter of the bull? That is some nice shooting! I’d like to run the targets thru OnTarget to get the composite...

Thanks! As a long-time range junkie with firearms... the notion of going back to my car to refill my rifle for 5 minutes before I can...

Consistency in spades! Nothing I've experienced in the past can match this type of consistency. The Mora in .25 caliber is quite simply...

I do that very thing with mine, and I decided to do it with the absolute smallest filter I could find - since all it is doing is...

I find the nylon hammers to be quieter than the metal ones, but JSAR's will be too heavy for your use at that low a regulated pressure...