airman_o's latest activity
" Yes, of course the M-Lok slots are functional. This is a professionally designed airgun from a well respected manufacturer which has...- Most of the screws that come with attachments are 12mm for m-lok . You need to get 10mm.
- airman_o replied to the thread Taipan Taipan Slash.I love the tactical handguard. But one think I'm wondering: is the clearance from the barrel wide enough so you can properly use the...
- airman_o reacted to MtnMarksman's post in the thread Daystate New Daystate Delta Wolf, erratic velocity with advanced setting with
Like. Talked to Shane at AoA regarding the long ramp up before the velocity stabilizes in advanced mode. He suggested putting 5-10 drops of... - I put my toes into the "buy thermal" pool, first getting a rather affordable (under $1000) spotting scope. I then was fully suckered...
- Like any optic there is always elevation and windage to take into consideration but I would say infinity. This red dot is a 2MOA and I...
- Daystate BlackWolf TAC .177 HP is working very well 👍🙂🎯🐺 Only 95 bar on the regulator 😃
- airman_o replied to the thread FX Beginner with FX Impact M4 Extended.A warm welcome from Belgium. And a great choice for an airgun 😉 first advice: keep it tuned as from the factory for a while until you...
- air supply so important...after that smooth sailing
- airman_o replied to the thread Daystate New Daystate Alphawolf Owner With Some Questions.after rereading and rethinking my post it’s maybe not the best idea to have the regulator that high. I had some spare time and lowered...
- airman_o replied to the thread Are the AEA Precision Center puch pellets that good?.I've recently been testing the AEA center punch 50,5 in .30, and it looks very promising. Compared to JSB the BC is a lot higher (0,060...
- airman_o replied to the thread Daystate New Daystate Alphawolf Owner With Some Questions.I just ignore the regulator pressure, when in factory mode the gun automatically adapts the voltage and dwell time to keep pellet speed...
- airman_o reacted to tommyb's post in the thread Coltri MCH 6 Owners, get in here, this thread is for you!! with Like. Finally!! Just got off the phone with Mitch Dexter, Sales for Nuvair. I placed an order today for a new ICON MCH-6 three horsepower...
- airman_o replied to the thread Daystate New Daystate Delta Wolf, erratic velocity with advanced setting.You should also check if you have the latest version of firmware loaded on the gun. It could be an older version out of the box.
- airman_o replied to the thread EDgun Leshiy 2 leak.You can get it out with a small pointy tool. Ie a toothpick or a needle should do the trick. It just lays on top so not difficult to...