Airgunmann's latest activity

It was black and i think 90 duro not sure if the color indicates a different material I also think the valve stems bending are do to...

Hi Folks, I’ve been working for a while on solving the slow first shot issue in the FX DRS. I’ve done various tests and tried different...

It looks different than the one that came out of my drs

If the valve block is still bolted to the rail with 4 top bolts I would loosen them and see if it will relax into place also loosen the...

Thermals are nice but your going to have trouble identifying animals at a distance with cheaper thermals I use a atn 640 thor 5 2-16 lrf...

So , after grooming the Holey Fridge range. I said damn, let's see if this thing is as easy to tune as everyone says it is. IT IS. I...

Some of the valves from the factory are not very straight to begin with

I found if you remove the return spring no more bending on the valve it bottoms out on the spring then they bend i remove the return...

I degassed my Panthera to install a Huma regulator. I watched a YouTube and saw a guy dry firing to do this. Bad thing to do. Bent...

I would have stoned the back of the valve flat if that was all that was wrong with it it seals at the orings looks like the hammer kissed it

Looks like the valve cap is loose which broke a oring on a panthera that I fixed seen it a few different times

This is the original valve in my delta wolf the new ultra flow has a larger balancing end on the poppet valve

Original delta wolf you can't tell the difference unless you open the valve

Old RAW guns are of gold standard.

By the grace of God I have recovered. Many thanks to my friends on this forum who remained concerned and who prayed for my health. So...