Airgnr_Ind's latest activity

Mine Cricket Gen 1 .25 was around 120 bar from factory setting.

You see, this is what happens. I have a busy street going by my house people have a truly annoying tendency to throw things in my yard...

You should be threading the regulator screw clockwise, not counterclockwise. Screwing it IN lessens the pressure, however, you need to...

For hunting purposes it is better that first shot after hours of waiting at the blind is as accurate as possible.

Following are replies from Chat GPT regarding two different kind of valving systems. Need comments of learned fellows. Please note...

When the first shot is lower like this I like to increase the hammer spring a little. I have one gun I cannot do this for because I...

First thing I would do is to shoot the rifle over a chronograph and gradually increase the hammer spring. I shoot two or three and then...

I would agree, it's unusual for the reg creep to cause a higher velocity. Usually, as the reg pressure creeps up, it makes it harder for...

If 25.3 are moving at 980, then the Heavies will certainly go around 890.

I'm continually impressed by my Taipans. I have the Taipan Vetran Long which I shot this target with today. Also have the Taipan Vetran...

Make sure to check with manufacturers along with vendors on the costs of parts, guns, etc before buying used. I know this is a “duh” no...

Yeah, sometimes life intervenes on our beloved vendors. It’s easy to feel slighted or neglected. Patience is key. But not easy.

Unless you live close to a place like Airguns of Arizona, the way most of us test guns is with our wallets. If you asked most of us what...

Hello airgunners, I am from India and feel so happy to be part of this forum. Best wishes to all.

6 shots at 100 yards 🎯 36gr H&N slugs at 1035 fps.