Recent content by AceRph

  1. AceRph

    Are all 3d parts as porous as

    I found an adjustable butt on Thingaverse. Dew up a mounting plate for my Prophet Performance using FeeCad3D. Printed it in PETG at a fairly high infill percentage, ~40%. Works great especially on a short butt plate like the one on the Prophet. Has not broken.
  2. AceRph

    EDgun West Opens U.S. Dealer Network !!!

    That's pretty cool. Good luck with the expansion, Brian. 
  3. AceRph

    Well, I did it......got the RTI Prophet Performance!!

    This is correct. They are not marked. In fact, I was the guy that got the AoA 25 cal Prophet. It was a swapped barrel gun. The serial number on the breech was the same as the sticker on the gun case. The sticker had 7.62 circled. I called AoA and spoke to Darrin (I think). He told me that...
  4. AceRph

    Morro Bay CA meet

    I like shooting there.
  5. AceRph

    EDgun Leshiy 2 Schematics

    Yo da man, Brian! Thanks.
  6. AceRph

    Tuning Leshiy airleak troubleshooting

    My Leshiy leaked down after I installed a Huma reg. Turned out that the o-ring next to the plenum squeezed btwn the air cylinder wall and the reg body. After a couple of stock o-rng replacements didn't work, I installed a 90 duro one. Hasn't leaked since.
  7. AceRph

    Who makes .25 slugs?

    Now I get it. My apologies. I hope someone comes up with a solution. I've got more buckazoids tied up in that L2 than any of the powder burners I own. At least it's fun to shoot.
  8. AceRph

    Who makes .25 slugs?

    Then don't buy it. Simple.
  9. AceRph

    Who makes .25 slugs?

    Yeah, they're disappointing b/c that means there's some tuning to be done. The gun has just become available. It ain't over yet.
  10. AceRph

    EDgun Leshiy 2 Megathread - It’s here!

    Shot 6 different weights today.. There's potential. https://www.airgunnation.com/topic/who-makes-25-slugs/#post-828533
  11. AceRph

    Who makes .25 slugs?

    I just got back from the range and shot 6 different weights of .25 cal AVS slugs at 50yds on the factory tune. I shot the Leshiy 2 (350mm with a Tishina 200 moderator kit) off a Lead Sled. The best groups from the slugs were 32gr and 38gr. The best groups overall were with JSB 25.4gr and 34gr...
  12. AceRph

    EDgun Leshiy 2 accuracy - no excuses

    Hahaha. 
  13. AceRph

    EDgun Leshiy 2 Megathread - It’s here!

    NSA slugs and FX hybrids fall through the magazine. In my airgun stuff pile I found some 36gr AVS Slugs with a diameter advertised as being 0.254" They fit flush with the back of the mag just like pellets do. Don't have to force them in any way. They fall in just like the pic shows. Gonna...
  14. AceRph

    EDgun Leshiy 2 Megathread - It’s here!

    Took it out and sighted it in. Didn't attempt groups but did some plinking around for about an hour. I've got to get more magazines and ammo. You could shoot a boatload of ammo in a hurry with that thing.