6gun's latest activity

Do you recall what your 2nd reg was set at when you sent it off?

Probably if you can open the valve. You're just removing a little bit of your overhead safety margin for even less of a performance...

The aftermarket handles the adjustable butt. I'm sure saber will have one if the rifle shows to be popular.

Since I shoot varmint from odd spots mostly I've learned to like less air and lower shot count guns for size and weight for sneaky...

A good regulated tube gun has a place. Heck even some unregulated tubes. My next expensive toy might be one of those dreamline light...

I am the opposite i look for a conversion away from a bottle to a tube .

I agree with this. Every barrel length has its limitations. I’ve always been a 500 and 600mm Impact guy. I just can’t go where the 700mm...

A tuxing 4 cyl Coltri clone, Amazon Shoebox clones work well too for the 92 inch bottles.

The buddy bottle seems like a good route. What compressor are you filling with?

I really like the single bottle m3

Hope this helps.

Just like I said in post #3, the gun got weird. Didn’t like it. Very short lived. Seemed like a good idea until the handling of the gun...

With a 500 you'll be needing to go up in caliber or barrel length for 30s ime. 28s maybe. 53 fpe is doable but 30s is about the...

I'm going to guess minimum 2 bottles wide with maybe a 1/8 gap. It's probably a more expensive route than a smaller diameter mod and a...

I realistically only use soft cases, so I dont think it'd be that big of an issue. But I will keep that in mind. I cant seem to find...