6gun's latest activity

Nice documentation and very promising on medium power. Thanks for taking the time to post this, it will give prospective knockout...

Matador?

Programmed new settings for Low Med and High on the Pulsar HP .177 and testing it on the 13.43g JSB Knockouts @ 53 yards, pretty good...

It's working and working well.

Chrono 820fps. My gun is stock settings right now, I might crank it up a tad later

I'd say if the vessel is holding some qty of air to bleed down, but the guages show nothing, pull the first guage and test it. I have...

Cheers mate. Filled the tank up to 300 bar on the compressor gauge. Degassed using the screw on the block, which hissed plenty for 5...

Pop a guage out and look at the port in the 1/8 pipe end of it. If you have a spare foster screw it on and charge/bleed it. I've had...

If you like those but need to take some longer shots at some point check out predator polymags. They're basically just a revision of...

Entered just under the chin and poked through it's lower back. A good 5.5 inches of penetration on this tree rat. Used the crow Magnum...

Try just de gassing just a bit to see if any air actually comes out. When you fill you may not actually be filling due to an...

degas. Disassemble. inspect or send back. That's just odd. Especially since the degas screw did work, And thats on the block. the reg...

If the tank has proven it's got some air in it but no guages work I wonder how much corrosion is in that gun and if the guages are...

Sounds like your Regulator is closed. Try screwing it CCW, just a bit, Don't go wild. Cant expain the fill gauge, But, if you screw the...

Unless you are familiar with the internals of airguns or mechanically inclined I'd recommend that you buy your first couple of airguns...