6gun's latest activity

08/02/2025 SOLD Not new, but I'm pretty sure I've put less than 50 pellets through since I bought it new. :) No pump included, gun...

If using the washer method, use several on a piece of allthread with spacers between. This will help keep the cut straight. Good luck...

FYI…old saw blades make great scrapers…they don’t have to be pretty. Cut up an old blade with an angle grinder, drill a hole in the...

As for the socket idea, if you have enough extensions and the right adapter, you an spin that to great effect.

Oh I get that position, it's my story too. "Of course I know him, he's me...." I recommend some sort of rigid form and sandpaper...

Hay man" some great idea's.Well i hate to say this but i have more time then money"i kinda like the socket idea"I got a rifle that shoot...

Hammering it would be better with material that soft, for the work hardening aspect. He said only .04” or so, I’d think a grade 5...

If he needs a mere 40 thou, I wonder why not just shim the action in the stock and just raise the assembly. If needed Pillar bed or...

I won't discourage op from trying this, but grade 5 washers don't hold edges as a scraper for too long in poplar or basswood...

I've done the router (not an option) I've used a table saw to rough out straight channel and chased it with a dowel or piece of pipe...

Dead on. the valve is the " make this hammer setting work" cheat code. I do the same. Find velocity, Use valve adjuster to tighten it...

Mines 700 and the best it ever did was 130 bar and 23 grain slugs at the top, 18 grain jsb at the bottom in the 900s for all of them...

best bet is YouTube videos. Watch as many as you can find.

150 is a good place to be, for slugs. Unless you want to shoot heavy pellets 150 will be a bit much if you want to lower the energy for...

In short there are multiple different ways to tune it lol . I mean no disrespect at all but is your goal raw power or accuracy with...