6gun's latest activity
- 66gun replied to the thread Raccoon Hunting.Yes jsb king domes even
- 66gun replied to the thread N/A Do most suppressors clip?.They say with the qd to do that, Ive run a ronin and a yokozuna with a qd on shroud or directly to the barrel tube at exact caliber...
- 66gun reacted to Airgun-Revisions's post in the thread American Air Arms Any skilled machinist out there? with
Like. Lol - 6prob not the suppresor, more likely your shroud or machined part on the end of your barrel, unless your using too small of a suppressor ?
- 66gun replied to the thread N/A Do most suppressors clip?.It's not going to be the moderator imho. It's whatever hes putting it on being very slightly out of spec. I have 4 Donnys, and a bunch...
- 6Only time I've had clipping was with the printed moderators. After little more looking ... general consensus was a threaded barrel...
- 6is this topic open for conversation again?
- 6No clipping with my DFLs on my four Maruaders or two Urbans.
- 6mostly the machining on the gun.. and lots of times that moderator is on the shroud and no decent barrel bushings to keep everything...
- 6Guns with substandard machining probably make up 90% of clippers.
- 66gun replied to the thread American Air Arms Any skilled machinist out there?.This is the sort of technical detail I live for. The thread will live on in searches.
- 66gun reacted to Airgun-Revisions's post in the thread American Air Arms Any skilled machinist out there? with Like. Show a pic of the side of the brass valve that made the damage. Just below the TP. I’ve seen this happen before and it’s usually due to...
- 6as i read it , we are only discussing clipping problem .( And now for my .02 ) anything mentioned so far can be the problem. i would...
- 66gun replied to the thread N/A Do most suppressors clip?.It's not the moderator, it's your guns. I was waiting to see hatsan
- 6Nope bad mounting. Off center shroud more than likeley. Suppressor is good, what it is on, not so much.