1handwill.gc's latest activity
1handwill.gc reacted to JimD's post in the thread Stoeger AFTER PINTY FIASCO ,READY TO TRY THE XM BULLSHARK.....TUNE REGULATOR!!! with
Like. One thing to be careful about with Bullsharks is the baffles in the end of the shroud. If the nut on the forward end of the shroud gets...- 1handwill.gc replied to the thread Tuning Velocity loss.Don’t worry sometimes it takes a minute or two for everything to settle down, but if it’s still too slow, yes the hammer until you get...
- 1handwill.gc replied to the thread Tuning Velocity loss.Would you prefer setting it up yesterday? Were you going down on the regulator by steps or you went all the way down then start working...
- 1handwill.gc reacted to actionpistol's post in the thread N/A Got an accurate gun? 100 yard 5x5 challenge with Like. And another 5x5 at 100 yds with the Taipan vetran tactical 2 700mm in 25 caliber shooting JSB KO slugs 33.49 gr at 953 fps. Average of...
- 1handwill.gc reacted to Str8tshooter's post in the thread N/A Got an accurate gun? 100 yard 5x5 challenge with Like. I shot these 5 groups of 5 the other day and posted here: https://www.airgunnation.com/threads/agt-v2l-100.1338648/#post-2030056 Just...
- 1handwill.gc reacted to Bigragu's post in the thread N/A Got an accurate gun? 100 yard 5x5 challenge with Like. Yes all pellets, sir. I’m not a slug guy at all
- 1handwill.gc reacted to Bigragu's post in the thread N/A Got an accurate gun? 100 yard 5x5 challenge with Like. Shot this one yesterday eve as the daylight was disappearing. Had to run the shots off quick. Wind was next to zero which helped. Epoch...
- 1handwill.gc reacted to Solo1's post in the thread N/A Got an accurate gun? 100 yard 5x5 challenge with Like. Shot this right after getting my 177 slug barrel for the ghost 13 gr
- 1handwill.gc reacted to moodyblues's post in the thread Brocock/BRK Commander XR hammer bounce with Like. Ok so I figured out the issue. The spring in the gun does work as a slingshot, however the spring is too soft to keep from loading back...
- 1handwill.gc reacted to Hobbyman2007's post in the thread Benjamin Tuning and making parts for antiques with Like. Not from my experience. If the spring is stiff enough and you’re not slinging a 90 gram hammer, zero hammer bounce. The other way to...
- 1handwill.gc reacted to Vetmx's post in the thread Benjamin Tuning and making parts for antiques with Like. If you give me ID x OD x Length, I’ll look through my stash. My stash is pretty substantial.
- 1handwill.gc reacted to Vetmx's post in the thread Benjamin Tuning and making parts for antiques with Like. The party for older or budget guns is never over. This summer I took a step back from the high end of the hobby and got back to the fun...
- 1handwill.gc reacted to Mike_Lenardon's post in the thread Benjamin Tuning and making parts for antiques with Like. All of the ssg's I've made use an 8x82 screw. As you know ya got to keep the weight down. This one is a self contained ssg and Hammer...
- For maximum air efficiency, you want a balanced tune. Reg pressure is critical, and if you tune so that the maximum velocity at a given...
- Hi Freddy J. Look at it from this perspective. If you wanted to destroy your valve assembly as quickly and efficiently as possible...