1handwill.gc's latest activity
- 1OK, I admit my head is hard. I thought I was starting somewhere in the middle and working both ways, but until someone challenged me, it...
- 1Are you actually working your way up and down or are you jumping from setting to setting? From your posts, it appears to me you still do...
- 1I've been using a Garmin chrono so I decided to drag out my Crown and try it to verify that's not a problem. I haven't fired the Crown...
- 1Still trying to move forward. Today, I checked: * the hammer for marks where the sear engages. No marks, it looked like new, and very...
- 1Man, I likely misunderstand completely and you probably know what you’re doing, but a crazy string when putting the reg to 75b and...
- 1I had an issue with the sear scoring the hammer(not the hammer weight!). I was getting wild swings like yours. I spoke with a tech at...
- 1Another day, another round of tuning. I started the day by: *checked pin probe fit in barrel. The pin is adjustable, and yes it was...
- 1Not sure what your tuning process looks like but the wheel/adjuster is basically useless to find a good tune. Set the reg to what you...
- 1It is truly amazing how quickly slugs will foul a barrel when compared to pellets. Must have a lot to do with the additional bearing...
- 1Epic Two in .25 with the LW 550mm barrel. 60 shots from 250 bar down to the reg at 135. If I pulled out 4 shots the spread would be 2...
- 11handwill.gc reacted to tommyb's post in the thread Tuning Regulator pressure VS Hammer Spring tension with
Like. NT: Very good explanation. As an experiment, I tried this with my .25 caliber Veteran Long a while back. Naively, I was hoping to... - 11handwill.gc reacted to nervoustrig's post in the thread Tuning Regulator pressure VS Hammer Spring tension with Like. With regulated airguns, the relationship between the regulator's setpoint and the hammer spring tension is really quite simple. There...
- 11handwill.gc reacted to IguanaPolice's post in the thread POI at different mag levels, SFP with Like. Thank you everyone for the follow up. In one of my posts above, I mentioned that I liked the Arken turrets (which I do) but I was...
- 1If you want a FFP 6-24 that has very good turrets and good glass why not a Arken EPL-4 6-24? I have one and I love it at 24X.. I don't...
- 1Yes you are right, I was confused thinking about holdover, the yardage in the turrets are not going to change with the magnification...