Recent content by .177Guy

wow, so u can send a heavier pellet with the same fps… that’s so interesting to know… I always thought that lighter the pellet the faster and harder it will with higher fps!!!!

I like that fps window u mentioned, my revere is factory set to 850fps and my drs is also factory tuned for 815fps… So what ur saying is u increased the weight of the ammo and stayed in 20yds or u went to ur 50yds distance With that fps setting??? cause I easily swing my kyl target at 34yds...

So what we are seeing here with this pistol is that it’s not really designed for beyond 10yds unless u wanna just blow up the reservoir and then back to filling if user wants to go let say in my case even under 35yds distance…

so today filled up the tiny 80cc gk1 tank up to 310bar, grabbed some 7.2gr Newman hollow point pellets. and opened up the power screw up to 950fps, and the pistol started dropping Pressure down to 5bar in less than 2 and half mags…. i was pushing the pellets from 20yds to 35yds… am I missing...

Ok guys after some long and hard thinking and few failed tries, today I came up with this idea and decided to give it a go, I was fed up with Orcair chrono stupid loud by itself but I love the form factor, and was unable to figure out how to integrate this pocket chrono with a suppressor, well I...

What u talking about man… I send all day those H&N exite 7.4gr the cheapest pellet available on pa and they shoot super fine… yeah with gk1 I just learned to keep the pistol at a certain angle and u will be fine with no pellet sliding into the barrel type issues while turning The mag for refill…

I knew I will end up chewing through pellets, when I was planning to get my gk1, Not doing hunting like ever, so yeah .177 was the way to go… I can get as high as 25fpe at my 35yds field and good 3 mags out do one fill. i guess to each is own.

I have been using this pistol for last few months indoor and I play with high power and low power setting but I have Not yet experienced air dump or self discharge at all… only problem gk1 has given me so far is the few holes In the mag have gone loose after few months of use!!! which I think...

Man I remember I had pellet stuck between the magazine and barrel one time in my gk1 .177, and I just casually grabbed my long cleaning rod kit and just pushed the stuck pellet back while Wiggling the magazine Slightly back and forth to let the pellet get back in the mag!!! Now I wonder what if...

And what is the distance on this field targets u guys are shooting at???

How many shots per fill u getting from ur revere before u get to 100 bar? assuming U fill it to 250bar?? also mine can only produce around 15fpe using 10.3g at 850fps I guess yours is tuned for little extra punch!!!

I bet u dollah it’s not the oring, it’s the tp on these rifles, mine was replaced by the Aoa with a slightly bigger tp and then They tested my .177 revere before shipping back to me with 16gr pellets and it held fine, I also ended up requesting them to send me a replacement tp. incase someone...

Not for sale anymore

come on man, what about the .177 guys ??? 🥺

Hey guys, anyone have tried this thermal setup, for some under 40yds backyard shooting??? I don’t go out hunting at all.. so anyone wanna chime in is more than welcome.