Saber Tactical RAW HM1000 Chassis!
- Thread starter Airgun Nation
- Start date
I dont think RAW sell here, but i like to get some trigger time on one, if it looked like that i would not mind.
Upvote 0
Meh. To me it’s a solution looking for a problem, like many of the Saber products. Just my two cents.
Upvote 0
They should make it more like the crown chassis with a folding stock. Rather just keep my original chassis.
Upvote 0
The castle nut and receiver end plate looks AR15 spec to me. There's a multitude of AR folding adapters that should fit.
Upvote 0
I already have one on my current HM chassis. I just think they should have one already integrated in the chassis like the crown.
Upvote 0
When will this chassis become available on the EU side?
and will it fit the MK2 Theoben actions, like they fit the raw chassis.
Thanks
and will it fit the MK2 Theoben actions, like they fit the raw chassis.
Thanks
Upvote 0
jps2486 said:
I'm getting a little tired of this tactical crap.
Hard to imagine what a company like Saber “TACTICAL “ was thinking with a move like this.
I'm getting a little tired of this tactical crap.
Yeah, does noting for me either
Hard to imagine what a company like Saber “TACTICAL “ was thinking with a move like this.
Upvote 0
Hey Michael you do you still have that Theoben? Would be interested if you could get that to fit inside this stock.
Upvote 0
Anyone got their hands on one yet and able to make a photo of the inlay?
Wondering if it would fit a Theoben action as the blind plug in the bottom is not as fr out as with the HM1000x action.
Really hope that it fits a Theoben action
Wondering if it would fit a Theoben action as the blind plug in the bottom is not as fr out as with the HM1000x action.
Really hope that it fits a Theoben action
Upvote 0
I have one on order Peete. Airgun 101 in the UK are very kindly ordering one for me.Anyone got their hands on one yet and able to make a photo of the inlay?
Wondering if it would fit a Theoben action as the blind plug in the bottom is not as fr out as with the HM1000x action.
Really hope that it fits a Theoben action
Saber have confirmed the stock is compatible with all the RAW’s so that means Rapids too
Upvote 0
This would be great, I asked Krale if they would order them. Only thing would be the blanking plug which would be needed to drill but will give you regulated air pressure with a gauge. And a longer prechamber/plenum between regulator and action would make it fit the Theoben actions.I have one on order Peete. Airgun 101 in the UK are very kindly ordering one for me.
Saber have confirmed the stock is compatible with all the RAW’s so that means Rapids too
Upvote 0
Hi Peete, yes I guess you would for a reg gauge and plenum. Sub 12 here so not an issue for me
I wish it was though
There are not many pics available and what there are are not clear.
It looks to have some advantages though, fitting all the Rapid derivative guns, being able to remove the action without taking the bottle off and IMO. It looks better than the RAW chassis when it arrives I’ll send you pics Peete.
It may take a few weeks to arrive though
I have all the Magpul furniture ready for it.
ATB.
John
I wish it was though There are not many pics available and what there are are not clear.It looks to have some advantages though, fitting all the Rapid derivative guns, being able to remove the action without taking the bottle off and IMO. It looks better than the RAW chassis
when it arrives I’ll send you pics Peete.It may take a few weeks to arrive though
I have all the Magpul furniture ready for it.
ATB.
John
Upvote 0
I have received the Saber RAW tactical stock Today 12/8/23
The stock is a very nicely machined item, however the HM1000 action will not fit into the stock the bottom plug recess in the action is only compatible with the HM1000X action, even if the bottom plug recess was elongated ( slotted) to suit both actions the HM1000 with the standard ‘V’ quick fill and gauge will not fit as the “V” will foul the stock.
This is very disappointing as it was purchased specifically for a HM1000.
Luckily I have a couple of HM1000X rifles so it will be used.
I hope this is useful.
ATB
a not so Happydude.
The stock is a very nicely machined item, however the HM1000 action will not fit into the stock
the bottom plug recess in the action is only compatible with the HM1000X action, even if the bottom plug recess was elongated ( slotted) to suit both actions the HM1000 with the standard ‘V’ quick fill and gauge will not fit as the “V” will foul the stock.This is very disappointing as it was purchased specifically for a HM1000.
Luckily I have a couple of HM1000X rifles so it will be used.
I hope this is useful.
ATB
a not so Happydude.
Upvote 0