What's everyone use to fill their PcP's

With this handy little adapter from Amazon, I don't think the one i bought had a fuze because i dont remember using it and I didn't use the switch either but that's all up to the user. Works great for me especially with flexvolt batteries, I can't really say if it's better than the supplied battery because i never used it and i already own a lot of dewalt batteries so its just more convenient. I'm sure you can do the same with other brands as long as they are 18v batteries.

View attachment 338239

Also just some info on my experience with the GX compressor, I dropped this compressor (brand new) off of a 36 inch wheel and proceeded to run it over with my jeep on pavement, not completely over but it was wedged in the wheel for a few feet until realized what the sound was 🥲 only some light repair work was needed but nothing major still worked like a champ and also recently dropped it in some muddy rain water and it's still pumping strong after probably 5 to 6 hours on it.
Thanks for the info!
 
  • Like
Reactions: 357cal
Here she is in all her glory lol she's been through a lot and still doesn't let me down
20230314_114729.jpg

20230314_114737.jpg
 
How long do the batteries last?
To be honest I couldn't say, the max I remember using it is 2 fills a day and the battery marked 2/3 bars for both fills on a 300cc bottle from about 145bar to 250bar, probably about 15-20 mins runtime. Everytime I use it I grab a battery from the truck and they are almost never charged %100 😅 so i dont really know the exact battery consumption but I'm sure that a 9ah Flexvolt is better than the included battery which is a 7ah generic Makitia style battery.
 
To be honest I couldn't say, the max I remember using it is 2 fills a day and the battery marked 2/3 bars for both fills on a 300cc bottle from about 145bar to 250bar, probably about 15-20 mins runtime. Everytime I use it I grab a battery from the truck and they are almost never charged %100 😅 so i dont really know the exact battery consumption but I'm sure that a 9ah Flexvolt is better than the included battery which is a 7ah generic Makitia style battery.
Thank you! …..it’s something I will try someday.
 
I use a Vevor water cooled yong heng clone with a water/oil seperator on the discharge to fill two 68cc ninja paintball tanks. Takes 7 minutes each to fill from 2500 to 4400 psi.
I tether one tank at a time to my condor, I don't move around to hunt so mobility isn't an issue but is easily remedied if I need to.

I also have a 105ci 4300 psi diving scuba tank for backup air which I get it filled at a local dive shop, they can only fill to 3300 psi.