Latest activity

6gun · Friday at 12:48 PM

Look for a used dreamline tactical compact. It's my favorite dollar to experience ratio gun. Even with pellets I'm shooting past 100 yards with it at 43 fpe. It's a slept on model because it's not super sexy over feature packed. It does what it does well, and easily. I'm comparing to my impact, semi auto aea and a couple benjamin pcps. The dreamline almost replaced my impact for usefulness and it's stayed stock.

ZekeZX10 · Friday at 12:48 PM

Vulcan 3 30caliber
62.5g @ 1001fps / 139fpe

Small entrance big exit!

Hard to judge distance at night. I aimed a bit low thinking he was a little closer than he actually was
so I thought my shot was gonna be a tad bit higher but it went right where the crosshairs were.

Slow motion is a bit choppy since I have to record at a reduced frame rate in low light

Anyway plenty of energy to get the job done!

Vana2 · Friday at 12:46 PM

Most of my PCPs are foster, the fill probes that aren't are fitted with a foster adapter.

I'll typically shoot one airgun in a session, it only takes a second to attach the correct probe to the foster on the hose. It's a non-issue to me.

Would be nice if all PCPs used a standard way of filling. Realistically, the foster fitting is quite bulky and long and doesn't suit every airgun design.

Just my 2 cents.

Cheers!

stretch56 · Friday at 12:45 PM

My point exactly woogie...I've never seen scotch tape....im going to assume ..certainly..they dont have some standing there pulling off four pieces of tape for every tin???

aimbig · Friday at 12:43 PM

This listing has been renewed

6gun · Friday at 12:42 PM

stretch56 said:
Just received my .22 ...jsb 33.9gr.....was wondering if ANYONE else has ever seen this kind of tape..(scotch tape...opaque..lol)...come on this brand & weight....I've only been in this a couple years ..soooo....im learning everyday....pellets look ok..only see 5/6 bent skirts...not alota trash in the tin..from what I untaped & checked....is there a ribbon tape shortage over in their neck of the world??...lmao...of course you know the first thing I thought.....THEY SENT ME SORTED REJECTS ????....View attachment 586332 View attachment 586330 View attachment 586333

I've gotten screw top tins like that a few times.

blacky · Friday at 12:42 PM

FYI Finally figured out how to fix co 2 leakage: The 1200 p's use a gasket piercer and it will fit the 200 !

OMC · Friday at 12:42 PM

SLICKNICK said:
Power can be adjusted on the hammer. You have to take bonnet off regulator and add or subtract shims. No shims, it shoots with less power and you get 4 shots. If you get a shim like the ones in regulator and add a thin shim, it will increase about 100 FPS using a 350gr. My stock hammer shot 350 gr, at 840-850. With the added shim 350gr goes 935-950 FPS.

What did you use for the shim and did you make a quick video on the process or do you have a quick video on the process. This shim add is for a Hammer Carbine correct?

6gun · Friday at 12:41 PM

M4Slugger said:
You certainly helped me and accomplished your goal. Haha. When you said spiral, I thought of some spiral stairs. Then when I disassembled it , made perfect sense. More like a “cam” with my SC public education. I was in full panic mode because Talon and done the tune and it shoots very, very, well. Thanks again sir.

Definitely like a cam lobe. Like a roller cam with steps on the lobe.

Here's the fun aha moment. It's nothing more than repeatable increasing pre load for the micro. So technically you could come across the same tune with different numbers on each and still get slightly different harmonic qualities.

Squack · Friday at 12:37 PM

RM.510bigbore said:
check NOE moulds...There .513 diameter molds shoot real good in my .510 Texan..They have a nice .513 350 grain mould...Around $100.00..

Noe is retiring and molds are 30% until gone.

Hobbyman2007 · Friday at 12:35 PM

Bert928GT said:
5 Shot group 100 meters with Sinner .223 and rws 41 grain slug 1060fps.

View attachment 523868

That there is a deadly combo. Once I stumbled on those RWS slugs and a rifle they worked in ( Evanix K550) I bought a few thousand of them. Krale hasn’t had them in stock for over a year now. Not that I need anymore of them. They also shoot very well from. Redmans .22lr barrel liner. Which is an extremely easy fit in any FX impact .

The K550 shooting these slugs will do 1 MOA on average at 100 yards. That’s tuned to about 70 fpe.

MushroomPsyche · Friday at 12:33 PM

I believe they got to the USA around September or October 2023. That's around the time Talon Tunes started posting photos of the guns on Facebook.

coastal drifter · Friday at 12:30 PM

Everything has a purpose so I try not to kill everything just because I can. They appear to be far enough away to not be a concern. God know why they are here.

DeanB · Friday at 12:28 PM

Arent they heavy seen where they are like 10.3# or something cant remember now, started to buy one once but that kept me from it? I dont think they are ugly compared to the all metal guns.

DeanB · Friday at 12:25 PM

When was the Vet 2 Standard originally available to be purchased, everything Google says 2024 but seen a post or 2 where people said they had them in 2023. Asking out of curiosity bought mine in 2024.

pompe · Friday at 12:22 PM

UDABEGGER said:
Is the sniper standard bottle not 890 cc .

Its not, that figure is the bottle + the tube (barrel) together. I know it is easy to mess the specs up, expecially for people that dont know the FX well.
Anyway have you ever seen a single 900cc bottle on a gun? I dont even think that exist.

Cantona256 · Friday at 12:20 PM

mainevent777 said:
Hahaha. Speed demon

Haha I know right?…. But im not gonna argue that one way is better over the other either. I just wanna minimize the time of flight/drop… plus I love the sound the slugs make when they come in hot

Precisiontactical · Friday at 12:18 PM

920air said:
i am not sure i beleive within the last few months or so. but yea 1200 for a drs pro is worth it imo especially if your capable of making your own chassis. i own several mdt chassis but thought i would try somthing new this time. i always liked a manners. what type of chassis do you plan to make?

We're trying to design a Seekins precision SP10 style chassis

Airgun Nation · Friday at 12:15 PM

EDgun Leshiy 2 “Alpha” – Elite builds featuring SubMOA barrels, Behemoth Silencer, and the new Alpha Trigger. Only one per caliber — including a rare 9mm.

Plus... One of only three Limited Edition Weihrauch Break-Barrels, each bundled with 4 boxes of Boom Flash Pellets matched to your gun’s caliber.

Edgun West | Edgun West Gearbox

EDgun West Store - Leshiy 2 Edgun Fenix Epic Airguns Steyr Airguns Airmaks Airms Airgun Technology

www.edgunwest.com

coastal drifter · Friday at 12:14 PM

Do-All Outdoors Bullet Box, Pellet & Rimfire Trap, 10x11

I use one of these in my yard. Its rated for .22 rim fire. I stand mine on a cinder block. Pyramyd air has them.

Spyguy · Friday at 12:03 PM

This listing has been renewed

Chukar60 · Friday at 12:02 PM

Snead360 said:
What did you recommend to your friends that are one and done? I like the idea of being able to switch barrels. Not sure if I would need to.

Switching barrels is not what it appears on the surface. I bought the FX sales pitch on that . It is possible and it does work. It is also enough of a pain that I just bought another gun in the calibers I wanted

Garder · Friday at 11:58 AM

Garder said:
Working with the magazines now. There is some filing and grinding on the plastic magazines before I can test nr 5
Super gun thou

Yess That did it

. I really appreciate the help I get here from the knowable people here at airgunnation

miksatx · Friday at 11:56 AM

I shoot cheap h&n 20.06 just shot this at 16 yards with my shorty and red dot. The bottom is the pellets just loaded in the mag. The top is pellets loaded and reset the pellets to the front of the mag.

oh I also have a stock on my shorty helps tons

M4Slugger · Friday at 11:52 AM

^^ Probably the best solution, but don’t want to mess with OEM parts on new tank set up. I'll keep looking.

Latest activity

Latest activity

Daisy Daisy 200

Taipan Vet 2??

Filter