Latest activity

Zaid · Apr 28, 2025

markhooper said:
maybe.. you should watch the video on the top of the forum by Tyler Patner.. sounds like whatever is not currently in stock is just paused..
Mark

I believe the micro stick is suppose to release August to everyone so dont see why they would have stock if you watch the shots show vids Air Venturi planned a late summer early fall release!

montana1 · Apr 28, 2025

Hi.
I got westhunter adjustable mounts (photo attached)
There is 4 white lines .
How many lines should I go up to get 20moa?

bfloyd1095 · Apr 28, 2025

I Know it has been touched on, but the absolute bottom line questions remain the same...

1) Is it fair business practice to charge the "new" tariff pricing on existing (old) inventory?
2) Do you think for 1 second the Pricing will EVER go back down, tariff or no tariff?

The resounding answer is HELL NO !!!

The theory/practice has been put to the test back in the Covid Ideocracy of price gouging... this tariff BS is no different I don't care how you spin it.

ndwind · Apr 28, 2025

DRS PRO MDT chassis with added forearm weight. A few minor marks from allen keys adjusting regulator and hammer.
I dont compete and this is just too heavy for the way i want to use my rifle. For best response call Doug 701-261-7575
$1200 plus shipping to lower 48 usps money order. I dont do paypal.

Zaid · Apr 28, 2025

OldVet said:
To me the AV gen 2 bullpup is same price , and I would rather have that.

I was looking at the notos but im personally was going to add the folding stock mod and suppressor mod I think it will end up the same price! So I rather just wait

Zaid · Apr 28, 2025

OldVet said:
To me the AV gen 2 bullpup is same price , and I would rather have that.

Honestly brother the look just says bulky and the micro strick fold probably to like 20inch and its half the weight of the gen 2 bullpup micro stick is going to be my truck gun have it there 24/7 . I have a fx maverick tht i love but dont like leaving $2k inside the truck 24/7.

Tpatner412 · Apr 28, 2025

markhooper said:
although I like reading the comments, and I agree with most of them, yes you'll know from the likes I did who you are.. lots of great information and points but I'm afraid this thread will get locked because of political posts.. before I can find out my last question as far as..

How do the terrifs affect the classified section??
do terrifs affect used private sales??
if so who and when do they get paid? or do you find out whatever deal you just made and paid for is a total loss because now you owe more.. I just think it would be good for people to know, maybe a notice at the top of the classified section to only do in country business depending on how it actually works..
like a buyer beware of whatever the facts are so you know what you are getting into..
again, not that it matters so much for what I want to currently do, but I'd like to know just out of curiosity.. and well I would think it would be good information for people to know..

please if a moderator reads this post, since apparently no one has a clue how the terrifs affect the classified section, maybe you could find out somehow?
I just don't know how to research it.
Mark

Mark,

The tariffs being discussed are import tariffs. That's where they apply. So your transaction with someone for a product that is already within the US, should not be subject to an import tariff.

If you were to purchase something from another country that is shipped directly to you, the way duties/tariffs are collected can vary. In my experience, I have been given a bill directly from the US based shipping company that handled the package stateside to pay upon receipt of the goods or shortly after receipt (have had this happen with both UPS and Fedex). Sometimes, USPS will hold a package at the local PO and you will have to pay those fees when you pick it up.

Hope that helps.

Tyler

igolfat8 · Apr 28, 2025

Took my Thomas HPX to the range today to check my zero before tomorrow’s N50 match. The weather forecast for tomorrow is going to be pretty windy so I wanted to zero a heavier pellet. I normally shoot 25.4 MRDs but when it’s windy sometimes I opt for heavier 28 grain Grands. Is shot a few sighters with MRDs and even tried 34 Jumbo’s but my gun certainly doesn’t like those so I went back to Grands. The last bull is 5 Grands @ 50 yards.

Pjking · Apr 28, 2025

This listing has been renewed

DougH. · Apr 28, 2025

Three sealed tins FX 50.2 grain
One open tin FX 50.2 @(136ct)
One open tin JSB 44.75 @(145ct)
One open tin JSB 50.15 @(127ct)

The JSB 44.75 grains are not factored into the price so they are free with the purchase of the lot. Whole lot purchase only.

$90 TYD

PPFF or USPS MO

Edit: Also willing trade for JSB or AEA pellets in .25 cal Kings or Heavies, tin for tin. Each of us pays their own shipping.

beerthief · Apr 28, 2025

just shot HW77 long .22 only 48 yards 6 to 16 MPH winds from East and up hill EDIT: Top left is first shot , bottom left is last shot , it figures right !
EDIT : these were Diabolo not wadcutter ,wad's would have nice round cut holes .

almost sbd · Apr 28, 2025

I have tried the JTS pellets and they did well, I have not tried AEA yet, which shops carry AEA at reasonable prices or offer deals? Thanks for the info guys!

Iowa Airgunner · Apr 28, 2025

I am planning the work this weekend on the field target corse.
Making out a big order for stupid stuff.
Timers ,clip boards a bottle for high pressure air. Things to make the FT competition go smoothly.

student · Apr 28, 2025

thank you, i'm looking at all the suggestions
it seems most are advocating .22, are they generally considered more accurate than other generally available caliber options?

.20calguy · Apr 28, 2025

This was all that i could find to share about your subject.

DougH. · Apr 28, 2025

I have two sealed tins of FX 18.1 grain
One open Predator Polymag 16 grain over full @(227ct.)
One open HNN field target trophy power 14.66 grain missing (7) @(193ct)
Whole lot only.

$60 TYD

PPFF or USPS MO.

Bramezy · Apr 28, 2025

Struckat said:
I spent the weekend with my cx3 and Marauder .22. I am confident with the gun to 50 yards for pests. I missed two reds Saturday @70y due to poor hold over. Takes a long time to get to the target shooting Hades @910fps. Very accurate. Boring under 40 yards.

I bought the Maruder from Airgun Revisions, a Walther barreled 22 for $300. It’s a factory referb which means AR goes through it and makes it right. I would rather buy one knowing AR went through it than a new gun in box.

The cz3 is a $300ish 3000psi compressor. The Mrod gets pumped to 2700. Make sure you match the air source capacity to the gun. There are a lot of higher pressure guns today.

I have the same and very very accurate gun. Mine likes JTS 22gr the best at 810fps or so.

RFORESTR · Apr 28, 2025

RFORESTR said:
o I may be confused but the Airmaks Katran NC looks like the pro version, however, the price is off or I am off. Please advise. I am in Rhode Island so Brookfield is driveable, what are your shop hours if someone needed gun repair.

I have an impact m3 and skout epoch. I am very interested in the Airmaks Katran pro if you have it.

cda00 · Apr 28, 2025

beerthief said:
flat screen TV box , or you can buy wardrobe box from moving rental and cut to size but be sure to use lot of extra tape and padding .

Cheers!

Trucker3573 · Apr 28, 2025

We shall see. Who knows about the next order I’m not convinced the first one is even here yet. Things off Amazon in my experience don’t take that long. Hope these aren’t still on the boat or hung up in customs. I’m highly hopeful but for some reason will be surprised if it’s here next week.

ARW · Apr 28, 2025

duchunter007 said:
Both are nice groups! I have shot some nice, tight groups with the .25-cal barrel. I also have a Sniper XR HP that AOA did the power tune on, and it shoots really well! just waiting for a SUB-MOA barrel to come out in .25-Cal.

Thanks, the top is a 3 shot group and the bottom is only a single shot to verify my zero. I have noticed the barrel does not group that well when it's dirty. I rarely let it go over 100 rounds between cleaning and since I am mostly a hunter that is not that much of a problem for me. When I do shoot it on paper to verify my zero and see an occasional round go out of the group, I know it's time to clean the barrel and that has always brought the accuracy back.

markhooper · Apr 28, 2025

although I like reading the comments, and I agree with most of them, yes you'll know from the likes I did who you are.. lots of great information and points but I'm afraid this thread will get locked because of political posts.. before I can find out my last question as far as..

How do the terrifs affect the classified section??
do terrifs affect used private sales??
if so who and when do they get paid? or do you find out whatever deal you just made and paid for is a total loss because now you owe more.. I just think it would be good for people to know, maybe a notice at the top of the classified section to only do in country business depending on how it actually works..
like a buyer beware of whatever the facts are so you know what you are getting into..
again, not that it matters so much for what I want to currently do, but I'd like to know just out of curiosity.. and well I would think it would be good information for people to know..

please if a moderator reads this post, since apparently no one has a clue how the terrifs affect the classified section, maybe you could find out somehow?
I just don't know how to research it.
Mark

IHatePaper · Apr 28, 2025

I’ve been having good luck shooting Daystate Howler 12.6gn around 900fps at 110bar, unsure which hammer spring I’m running - 4/5 within 1” @ 100 yds. Needs more experimenting but I’m feeling more confident shooting past 50yds.

bchannell · Apr 28, 2025

As long as the body is smooth near the end where it seals on the oring, it's fine. I'm not sure what you're saying about metal to metal contact, but I'm guessing it's oring resistance? maybe? Did you lube the orings inside?
You could ever so slightly chamfer the piston, but I wouldn't go much on that.

trailhiker21 · Apr 28, 2025

heggie said:
I just repaired my Maverick that was leaking in the same place. It was the front regulator. I just got a regulator kit from Utah Airguns. Much easier than replacing all the orings in the regulator. Easy fix $54.

Funny you should mention that. UA just said they could ship me the regulator instead of me having to ship in the gun. If it’s an easy swap, I may opt for this route.

Latest activity

Latest activity

Question Other Ajustable mounts 20moa

PCP Rifle SOLD DRS PRO Chassis

Projectiles SOLD .30 Pellets FX/JSB 44 & 50 grain Or Trade for JSB/AEA .25 cal.

Projectiles SOLD .22 cal. Pellets (2) Sealed FX 18.1 / Polymag 16’s / H&N FTT Power (Copper coated 14.66gr)**SPF**

Brocock/BRK Brocock Ghost HP .177 - Shooting Outdoors

Filter

Question

Other Ajustable mounts 20moa

Projectiles SOLD .22 cal. Pellets (2) Sealed FX 18.1 / Polymag 16’s / H&N FTT Power (Copper coated 14.66gr)SPF