most of the Snowpeak produces use M3 and M4 fasteners except for the frames
now a picture or two could help
hex head key size has nothing to do with threads size but a 3mm grub screw will take a small size hex key than a 3mm hex head screw
the fix is unknow because the problem is not totally known

OK, question for those participating in this "All Things Huben GK1" thread.

When did Gk1 come with the traditional square print carbon fiber tubes, and when did they come with shadow carbon fiber tubes? I thought the later ones got switched to the Shadow but I see current ones back to the original one. Curious.

Thanks for any info.

I often say i am a slug whore.

BUT ! i have not burned my bridges, and i do have wholesome range fun & challenges with pellets now and then.
Got 10 tins of heavies Friday and i grabbed one and threw it in the ammo box with the slugs, but the wind while not super bad it was alternating and so even at moderate distance ( 50 M ) you had to work hard for your good hits.
During a lull today i even tried 75 M and also 100 M but it was a tough call and in the end i just had to deal with circumstances and get that tin empty.

9 tins / a stick remain, waiting for the good times.

You do know that water wetter and purple ice are just soap correct?

Please send PayPal invoice

This listing has been renewed

I apologize if my thread created any confusion.
I've only needed to replace tube orings in my UK Vet, CZs are still going strong.

I believe the photo of the manual in that link above is from a CZ Veterano.

I agree.

Kent Hendrickson
78 Carpathian lane
Waynesville, NC. 28785

This listing has been renewed

Update:

Well I hope this works this time! I called Hatsan, needed new O-rings from assembly and tearing it down to much for testing. It began to leak. They asked if I modified it and i told them what i was going. They seemed interested to help, so they sent me a full O-ring kit and nylon seal for the gauge. I asked for a new regulator block in case this fails, HOWEVER, they tell me they dont have it in production anymore!! Like SERIOUSLY!!!! So if this fails, Ill have to re-machine a new one. A local shop said $250-$300 to make it. Like, CMON Hatsan! How you gonna be like that.?. But, moving on....
I cleaned up the block, removed the junk that the weld created, then 3d printed a bolt that matched the threads on the good side, screwed it in till it just passed the air hole in the block, then stuffed JB weld in the hole on the bad side, smoothed it all out and sanded clean, removed the 3d part, then painted it satin black. So far, It takes 100Bar and holds. No leaks. No explosions, lol...

duchunter007 said:

I agree with the Arken Scopes, I just bought my first one, the EPL4 in 6x24x50 and it is really nice!

If you go to the Arken Optics site and decide on getting one type in Cyclops, and you will get a 25% discount

Click to expand...

I just ordered one from Arken. They are running a sale now so it was a really good price even before the discount!

Peashooter said:

My friend absolutely do not like change, pretty much of any kind.
I am personally OK with such things, but in general i must insist of being the initiator, CUZ new things pulled down over my head i do very bad with, but sweet talk me just a little into something new, and i am all over it.
But try and force me to do anything, and you can rest assured i will absolutely not do it.

My PC of course do only get updates when i want to, which is pretty much every 2 day before i go to bed.
My PC and internet is also full fat, so i could easy play a FPS game online and DL a couple of updates at the same time as i have a editing program going with a video compiling, and feel nothing.

Okay maybe not a 4K / 60 video exporting as H.265.

12 cores - 64 GB RAM, and OK 16GB GFX card, old school games so i would of course not play a game with all the visual BS they garnish games with today, old school gamer, low graphics settings MAX gameplay.

Click to expand...

well for me it's more of technical support, like I am fine with a change, but only as long as I know or can easily figure out how to work it..
honestly in the last month I've had to go to the T-Mobile store and ask them where the settings were moved to for several apps, because what good is voicemail if you absolutely can't hear it..
I forgot the other issue but seriously it's bad enough that the very good guy couldn't find where they moved the setting for voicemail but he moved the button for me so I can at least turn on speaker phone and then struggle to understand the message..
before until I get someone else to listen to the message I actually couldn't tell if it was even playing any sound..
change is fine as long as we can actually know how to use it.. unfortunately my daughter is in Minnesota and I'm in Oregon and she works way too much plus school so I have limited technical support..
also we have some very nice members who in spite of me forgetting have helped me enough that now I can actually find the classified section..
maybe someday I'll figure out how to and be able to post a addyes maybe I've been here long enough and enough posts so that's definitely not going to be part of the problem.
mark

.22 / JAVELIN .218 / 30 gr / Tony @ Talon said 1000 fps.. I don't adjust anything..

I wouldn’t hesitate to buy a new model from Taipan, anyone heard about Taipan previous new releases having problem??? Beside the Mutant when barrel shortage, none.

Update:

After the last update, I had a buddy tig weld the hole shut. I Thought "that should do it". AGAIN i was wrong. I dont know what kind of metal this is, it must be some sort of vibrainium from wakanda or something cuz it didn't want to weld up for nothin. But I tried anyway. Well, It to exploded. The weld came out like a bullet. Blew a hole in my couch 8ft behind me when it got to 150bar. That again scared the pants off me. Wasnt ready for it. I figured id get at to at least 200 bar before i had to worry...BUT NO!!!

Peashooter said:

I am sad i can not buy a American car.
Or i can, but then i pay almost the same for gasoline, but for a liter not 3.7 liter which is a gallon. i would KILL for dirt cheap American gasoline ( that was a metaphor i would of course not kill anyone )

So for good reasons i drive a frugal little Jap hatchback CUZ aside for the fule cost, as i usually say in Denmark buy 1 car,,,,, pay for 2.

så America get off your butt and make some nice stuff that make sense for Europeans and that way level our trade, we do dot refer from buying American stuff CUZ it is American, you guys simple do not make the stuff we like.

Click to expand...

We have a tough time competing with the much of the rest of the world due to the dollars status as a reserve currency. It makes the value of our currency artificially high and that makes the price of our exports higher than the competition.

There are a lot of positive things that come from having a reserve currency, but it’s a double edged sword.

Update:
So I pressure tested it. Yea lets just say I had to change my pants when the pressure got to 100 Bar... The check valve foster fitting threads did not hold at all. Im assuming either bad thread job or the aluminum was somehow softened when it was threaded, because the fitting exploded out of the hole!! scared the crap outa me and my dogs and my wife. She thought I accidentally fired my 9mm in my office. WAS NOT on my radar of things to think about when filling the tank. But man was it a bang....Then to make matters worse, it ripped the thread up a bit and it wasnt going to be salvageable. So on to the next update.

this is something everyone should consider as well.. a few years back I really wanted a attaman ap16 compact.. then it went on clearance sale at pyramid air, but I was worried about being able to get parts if anything was needed.. so I held off..
this all started and continues due to political reasons, you all know..
but the fact is that they are not available as far as I know period..
hopefully this terrifs and especially effects on small companies, depending on how it all plays out, we might see more of what happened to attaman.
Tyler Patner alluded to things being paused
Troy mentioned some small companies are just not shipping..
it's just something everyone needs to be aware of and how to navigate this..
like don't take a trip without a map or something..
Mark

What caliber?

No rats at our landfill. It's covered every night. We see more rats coming off people's loads than from anywhere else. Our feral cats decimate them.