Ratzy said:

H&N Barracuda Match

HatsanUSAH&N Baracuda Match

H&N Baracuda Match pellets are a heavy, extremely accurate pellet for long ranges. Top-notch aerodynamic design for high impact and penetration. Tightest shot groups. Lowest rate of lead foulin…

hatsanairgunsusa.com

Click to expand...

Pyramyd air buy 3 get 1 free. Best deal on pellets and slugs

I will be buying them for the HM1000x that is on its way. Need to verify width of slot first.

qball said:

Very interesting, this is VERY late for them to come out and have young.

Click to expand...

Yep, but then my veggies aren't growing right so who the heck knows. Most of the squirrels I've been shooting are young and there are a lot of them. The permission is too far for me to go over often to lay out bait for them. I need my faithful retriever Pete, I also need to be able to see my turrets, it's getting harder, a company MK Maching, makes a magnifying glass for them, that 's next on my purchase list. I also need more stickers, I've mislaid 2 of my sheets. I suppose I could get a DNT but I like my Arkens.

Archdesigner03 said:

Got an response from AOA regarding the O-ring size for .22 cal. It's 5.28x1.78 or an AS009. The daystate chart missing the 5 before .28. I've also edited the original post to limit the confusion.

Click to expand...

So it's the same as a Delta Wolf and Ghost ...

Absolutely nothing.

I had a couple of qd mags and they worked well didn't have any problems with them they were for a drs i had

My guess is premium price for minimal, if any, gain.

OldVet said:

OK I went back , and told the AI It was wrong , and now its saying all 3 made in China , but not at same place.
#1 Umarex Gauntlet made in Shanghai Gong Zi machinery manufacturing Company LTD.
#2 Umarex Zelos made by SPA.
# Air Venturi Avenger made in China by Nova Vista.
Funny how that AI was actually wrong , but it's not the first time. That AI can calculate formulas that would take me hours , but can't do simple things. .

Click to expand...

I've been assuming that the Pinty P-Force are made by SPA given that they are clones of Snowpeak rifles.

Where do you get your O-rings for the GK1s in the USA from Oring suppliers? Probably will buy a few dozen just in case..

H&N Barracuda Match

Accurate and inexpensive is a tough combination. Most of the low priced pellets I've purchased over the years have been disappointing but there are occasional lottery wins that keep me playing the low odds game.

Lately, the best value I've found are the Norma heavies in both calibers (9.1gr and 17.6gr). Granted, not as good as some of the more expensive brands but far better than Crosman.






A word of caution on ordering pellets from Amazon...a lot of people have reported a high rate of shipping damage. My experience was similar. Here are the JSBs they sent me.


They graciously sent replacements...which also arrived damaged. Pellets that are shipped in carded packaging tend to fare better.

xsarfc9x said:

Racing,
I'd love to see you take a Max1 or a Zelos apart to work on. Your posts and work are always very well done. Really liked you BSA R10 post.

Click to expand...

Hey thx!
That thing.. has been used loads lately, and finally got a CF bottle on 500cc´s at that. A 300 bar one.




Have it running around the 100J/73fpe mark approx where it seems to thrive. This might sound weird being me, but it kind of feels done. Just plain delivers n shoots 22cal slugs like was it going out of style.



Seeing all i´ve bolted on there, the scope especially, if there´s one thing i wish for it´s that i could make it 2lbs less in weight.
Buuut... i´ll survive.
The scaly tails will certainly not

Very interesting, this is VERY late for them to come out and have young.

Wow,Good luck with the interview.

So was the two yard squirrel a “mano a mano” encounter… Or do you have a bayonet on that sweet M3…

This listing has been renewed

This listing has been renewed

Thank you, I looked at this but DNT states with this mount the channel is wider than the ridge under their scopes, the mount will also shift the optic forward so my eye relief will shift, the height will lower from 1.54"to 1.2" and the total length of the base is very short compared to other one-piece QD mounts. I am not sure this the right solution as my current setup (height and eyerelief) are perfect.

Tpatner412 said:

Agreed. Much like the rest of the internet in general, can't trust everything you read these days.

Click to expand...

I asked an online AI if my wife was wrong. I'm still waiting for it to reply.

How about we do a "team" challenge too. Pick 3-4 competitors from your club and we'll use the top three scores for the team total. I'll have some prizes for the winning team. Any classes will work for the team.

6gun said:

I went nuclear after blowing my air stripper and baffles to chips with a double feed fiasco.

View attachment 576224

Click to expand...

What is that bolt handle? I like!

RobBonnell89 said:

They got you with the “Route” shipping insurance I bet. It’s one of the biggest moves I’ve seen. Have to uncheck the box

Click to expand...

I didn’t know that you could still uncheck the box. I looked for a way to opt out and couldn’t find one on my last order.