Latest activity

Racer88 · Jul 10, 2025

6gun said:
I went nuclear after blowing my air stripper and baffles to chips with a double feed fiasco.

honeysuckle said:
What is that bolt handle? I like!

6gun said:
Home made. Thank you!

There are similar aftermarket "big" bolt handles for PB rifles like my Ruger Precision Rifle. This one is called the "Hammerhead."

Hammerhead bolt handle and mag release extension.jpg

I'm surprised someone isn't making them for the Marauder.

Kneepit · Jul 10, 2025

This listing has been renewed

Pellets&Pistons-(Razor62) · Jul 10, 2025

Wadcutter said:
It looks like lefty Tyros were made.

View attachment 576881

Excuse me while I wipe the drool from my keyboard..... There she's, folks! The lady of my dreams!!!! Be still my beating heart...

Thanks for posting this, my friend.

Ratzy · Jul 10, 2025

airgunutty said:
My apologies for the suggestion. I will keep my opinions to myself in the future. As an At44 owner I am very pro Hatsan. I hope you find the right pellets that work for you and that you have a great day.

Mike

No need to give up. I literally made the same mistake and had the facts pointed out.

That 4:3 works very well when Pyramyd has a 10% or more off sale.

I think Utah Airguns does 5:4. Same issue.

As the late great Robert Heinlein wrote: TANSTAAFL
"There ain't no such thing as a free lunch"

FLgunner · Jul 10, 2025

I have a 580cc bottle on my 600mm barreled M4, no special moderator needed, the FX mods that comes with it fits and works well. I also use a HUMA-AIR MOD40 on .your 600mm .30 barrel and it fits also.

BSJ · Jul 10, 2025

Air King said:
You appear to say that ISO 46 is a brand of oil? No, ISO 46 refers to the global engineering standard for oil quality recommended by ALL air compressor manufacturers, including Yong Heng.

Yong Heng used to call for using AW ISO 46 Hydraulic oil. They don't anymore.

If you are saying any ISO 46 oil is suitable, you are being too vague.

6gun · Jul 10, 2025

Loug647 said:
Again, new to airguns.
Mark I in 17 and 22 cal.
What are good accurate pellets to try that are inexpensive.
Going to order from Amazon.

As many as you can at 50 %off rn at utah air

JungleShooter · Jul 10, 2025

Mycapt65 said:
Most scopes under $1000 don't track well enough. Or at least they won't do it for long. You're better off using the reticle as much as you can and watching your cant with less expensive scopes. If you want to dial like a sniper you have to be willing spend $1K or at least $500 if you buy used or can catch a good sale on a discontinued model.

I think the $1000 requirement to get a scope that tracks well applies to scopes from a decade or two ago.
➧ We have entered a Golden Age of Scopes

(same can be said for airguns, just look at the development in the last 10 years

).

Even $500 MRSP might not be necessary to get turrets that are consistent, over time.
Athlon, Arken, Vector and others turn out really good stuff.

And there are always lemons in every batch of product, no matter what. — So, if you had a bad experience with sub-$500 scopes, I'm sorry!

Matthias

6gun · Jul 10, 2025

honeysuckle said:
What is that bolt handle? I like!

Home made. Thank you!

Joedirt199 · Jul 10, 2025

MBA Buttstocks | Luth-AR

The Luth-AR Modular Buttstock Assemblies (MBA) including MBA Kits

www.luth-ar.com

This company

JungleShooter · Jul 10, 2025

Liontracks said:
I am looking for scopes with center dot reticles and magnification for hunting, ideally under $600.

Suggestions?

Hi, Dino,

I have lots of suggestions for scopes, LOTS and LOTS.

But most of them probably won't be good suggestions for YOUR shooting scenarios.

So, if you give us some more specifics, the suggestions will be much more helpful to you.

➊ Is this for a springer or PCP?

➋ What is your budget?

➌ Is this for targets/ plinking —
or hunting —
or both?

➍ What is your shortest range and your longest range you will be shooting at?

➎ Do you prefer FFP —
or SFP —
or does it not matter?

➏ What do you mean with "center dot"?
I'll attach an image to show what I understand under "center dot".

Cheers,

Matthias

airgunutty · Jul 10, 2025

Ratzy said:
Not at 10.79 each
10.79x3=32.37

Hatsan;
7.99x4=31.96

The 1 free is not free, they just charge more for the other 3.

My apologies for the suggestion. I will keep my opinions to myself in the future. As an At44 owner I am very pro Hatsan. I hope you find the right pellets that work for you and that you have a great day.

Mike

Struckat · Jul 10, 2025

I have an Athlon Helos 2-12, its wonderful.

BlackICE · Jul 10, 2025

Taxidermy Raccoon Cowboy Finger Guns

Taxidermy Raccoon Full Body Life-size Mount Cowboy Outlaw with Cowboy Hat, Bandana, and Finger Guns Western Movie Country Music Style Howdy! This raccoon is a bad boy. Is he on the run? Is this a stick up? Please note: This item is MADE TO ORDER, meaning we start making it once an order has been...

brooklyntaxidermy.myshopify.com

I would have a valuable use for the coons I just trash.

Trucker3573 · Jul 10, 2025

Another way to clarify a bit. I would use the macro more on a tuned gun to adjust power to a situation , where as the micro is what is concentrated on more for tuning.

Adam · Jul 10, 2025

This listing has been renewed

Scroooface · Jul 10, 2025

May I add an ugly bullpup in here.... Not mine but damn it's ugly... Crosman 1377

Markus33k · Jul 10, 2025

I got Kral Puncher shadow locked to 15Joules , what is a maximum power I can adjust using method provided above ? I have attached picture with regulator gauge with tank filled to 230bar . I have opened that part which is supposed to be Reg , there is only one bolt in reg and nothing more , I was expecting some kind of spring valve. 2nd picture

LRF · Jul 10, 2025

This listing has been renewed

JungleShooter · Jul 10, 2025

HogKiller said:
Yep, but then my veggies aren't growing right so who the heck knows. Most of the squirrels I've been shooting are young and there are a lot of them. The permission is too far for me to go over often to lay out bait for them. I need my faithful retriever Pete, I also need to be able to see my turrets, it's getting harder, a company MK Maching, makes a magnifying glass for them, that 's next on my purchase list. I also need more stickers, I've mislaid 2 of my sheets. I suppose I could get a DNT but I like my Arkens.

I was just going to respond to your earlier post about not seeing your turret numbers —
and mow you found exactly what I was going to recommend you.

MK Machining is top notch — they use the good glass for the magnifiers (unlike others).
They have them in different scope tube sizes, even 35mm and 36mm.

On certain holidays/seasons they run up to 30% discounts.

After postponing the inevitable for too long, I finally ordered a bunch of the magnifiers. They work well!

Matthias

thammer · Jul 10, 2025

The biggest issue is I see is you're shouting left handed. Right would tighten those groups and easy 1/4"... lol... love you brother.

Doc_pafumo · Jul 10, 2025

Hi everyone.
I’ve asked this question in another post, but with no success and no replies so far. Let’s see if someone here can help me.
I’ve bought the Huma regulator for the RAW HM1000X, set at 143 bar. It only comes with a brass disk that screws into the area where the bottle attaches. But it doesn't include a piston or Belleville washers.

Maybe my question is silly, but I can’t find any videos or manuals—do I need the piston and Belleville washers?
Can someone tell me where to buy them, and what configuration and number of washers I need?

It really surprises me that Huma doesn’t include the washers or the piston...

kwaping · Jul 10, 2025

Arzrover said:
So it's the same as a Delta Wolf and Ghost ...

That's great, a ready supply.

Air King · Jul 10, 2025

BSJ said:
I'm pretty sure Yong Heng stopped using ISO 46 oil, years ago. It stinks and builds up carbon.
SECO 500 is a better option.

You appear to say that ISO 46 is a brand of oil? No, ISO 46 refers to the global engineering standard for oil quality recommended by ALL air compressor manufacturers, including Yong Heng.

Dunk1302 · Jul 10, 2025

Thanks all...... lots of food for thought & tinkering at the weekend!!

Dunk

Latest activity

Latest activity

RAW Rapid Huma regulator RAW HM1000X question

Filter