Latest activity

TonyG_865 · Wednesday at 4:48 PM

Does anyone know if Tuxing and Air Marksman are made by the same manufacturer? or if they work together in some sort of capacity? I'm asking because I wanted to buy an Air Marksman air cylinder and my local airgun shop tried to sell me a Tuxing air cylinder 580cc for $400 and say that it's an Air Marksman and the only difference is that it says "Tuxing" on the bottle. To my knowledge, Tuxing is a completely different brand than A.M.

rangur1 · Wednesday at 4:44 PM

Have an Epic 2 LW polygon barrel 550mm. Comes with transfer port and valve and o ring. Slight scuff by muzzle on the 1/2x20 adapter. Lightly used. No more than 40-50 shots. $285 shipping included, PayPal F&F , conus.

WillM · Wednesday at 4:40 PM

I’m the one who told you to twist and it works for me. Didn’t seem especially tight.
I have been getting fliers randomly with my .22 BW to the point that I took it in to AOA and they pulled the shroud, pulled the barrel and checked everything and got it to shoot a good group at 20 yards. I have not been able to replicate that even though I can do it with my RW so it’s not me.
Today I shot with shroud off and on and grouping is worse than ever - 6” and not consistent shot to shot although I did get three shots out of 25 to touch (and then the fourth was inches away).
I looked at barrel and muzzle with Borescope and don’t see clipping but barrel seems to be very leaded so I’m going to clean it (again) and maybe polish it.
Suggestions or ideas appreciated

borne2fly · Wednesday at 4:38 PM

sekiar said:
Love mine! Charles

Charles, just FYI if you find your barrel shroud coming loose (the set screw really isn’t adequate) you can epoxy it in place. I did that to mine.
Not sure about the M712 but real C96’s offered different barrel lengths. I’ve thought about getting a second one and modifying the length of the barrel and shroud. I extended the barrel and shroud on an old Crosman MK1 and it increased both the fps and accuracy. But for the M712 I might go the other way and shorten it since I’m often switching to full auto and aiming at targets within 5 yards

Hunter25 · Wednesday at 4:37 PM

Hunter25 said:
There's a detailed thread on utube by pj Clark that will tell you exactly how to do it. It's not that difficult from what I seen. It's an 8 part thing. The one that says internals should tell you exactly how to do what your wanting. I'd suggest that since you own a 2400$ gun that you watch them All. I own a panda,and i did. Learnt alot from it also. Pj explains everything near about. If you type Redpanda in utube,the vids will pop up.

I do believe on the slug guns the second reg is wide open,or should be. My pellet version of 30 caliber second reg is at 2800 while first is at 1900. Refresh is instant for 24 shots from a 4300psl fill.

SpreadLead · Wednesday at 4:34 PM

This listing has been renewed

JimmyV · Wednesday at 4:33 PM

Zut said:
I bought the HW35E from Krale a few months ago. Great gun, you won't regret getting one. Krale has the Beech model in stock for $339.00 plus $52.00 shipping. I received mine in 3 days.

Unless you have to have the finger groove I would just get a new one. The new style stock is pretty easy on the eyes and the checkering on the forearm makes it easy to grip.

It is very accurate with H&N Field Target Trophy's

Z

View attachment 288566

I got one from krale the tube was so out of round it wo chronograph any where between 380 and 590, junk it was.

Hunter25 · Wednesday at 4:33 PM

rodjava said:
I have the .30 cal Red Panda that was tuned for slugs directly from Karma. I shoot a 77 grain boat tail slug at 950 fps at 200 yards. I'm setting up the RP to shoot 200 yard bench rest targets.

Karma/Donnny FL presets the #1 regulator at 3000 psi and suggest that it should not be changed by the user.

However, my best tune for 77 grain slugs at 950 fps is to set my #2 regulator at 2950 psi. Now that I have a digital manometer on the #2 regulator, it takes an average of 1:45 seconds after each shot to obtain 2950 psi for the next shot.

The longer my shooting session, the longer it takes to get back to 2950 after each shot. The last shot I took today took 2:30 seconds.

I shoot tethered and have my external tank set to 3100 psi.

I believe it takes so long to refill the plenum to 2950 psi for each shot is because the #1 regulator and #2 regulator are both almost the same. 3000/2950 psi

As I mentioned, Karma/Donny FL does not recommend to make any adjustments to the #1 regulator. It's a pain the arse to wait 2 mins before each shot!

So, how do I do it? I just want the #1 regulator to be 10-20 psi higher or 3020 psi instead of 3000 psi.

Rod in San Francisco.

There's a detailed thread on utube by pj Clark that will tell you exactly how to do it. It's not that difficult from what I seen. It's an 8 part thing. The one that says internals should tell you exactly how to do what your wanting. I'd suggest that since you own a 2400$ gun that you watch them All. I own a panda,and i did. Learnt alot from it also. Pj explains everything near about. If you type Redpanda in utube,the vids will pop up.

Louie4321 · Wednesday at 4:30 PM

This listing has been renewed

Gerry52 · Wednesday at 4:28 PM

In answer to "go to" guns. Either my FX Boss (.30) or my .22 Edgun R3 long (Slug gun). You can easily bait the ground squirrels with Black Oil Sunflower seeds or watermelon cut into small chunks. They find both irresistible & will sit still long enough to zero in on them.

Huntnhumans · Wednesday at 4:28 PM

This listing has been renewed

Ries · Wednesday at 4:25 PM

The tests I have done really makes clear the oring is the problem.

Not sure if FX changed it alteady without editing the drawing.

ZeroVibe · Wednesday at 4:24 PM

Racer88 said:
View attachment 571477

I've spent that much stocking up on pellets for my first air rifle, and I've only had it a few weeks!

My current pellet consumption borders on the absurd as far as I'm concerned. Though I think I found two different brands of 25.39 pellets the crown likes, so that should help keep my expenditure on pellets stable...which still remains absurd.

Florida_Man · Wednesday at 4:20 PM

Casual shooting.

Gerry52 · Wednesday at 4:19 PM

elwoodblues said:
Why don't you get it hydro tested cost's about 30 bucks, What city are you in or near?

OP doesn't state the mfg date, only that it's out of Hydro. If tank is older than 15 years no one can LEGALLY hydrotest.

rangur1 · Wednesday at 4:17 PM

More for budget offerings. Will do video descriptions, it’s easier. $50 shipping included. PayPal F&F, conus. Thank you.

davecole · Wednesday at 4:17 PM

One of the coolest features about JD’s is, regardless of which model wheel and because of the hub design and how it is standardized the wheels are all indexed the same. You can use the yardage on the original to mark the newest wheel exactly without having to even look through the scope. You could try every arc of wheel he makes and be able to conclude which wheel is best for your scope. You do not need a hub for every wheel.
Set the original wheel so the pointed is at the 10 yard marking. Carefully remove it. Without moving the parallax turret, Install the new wheel and mark it 10 yards. Remove the new wheel, install the original, turn it to your next yardage (assuming it’s 11). Without moving the parallax turret, install the new wheel and mark it with that yardage. Repeat this process across your yardage spectrum and you will have a second wheel labeled with the exacts same yardage as the original. Takes all of five minutes.

Gerry52 · Wednesday at 4:10 PM

Danl said:
I am interested in a pistol rest that is 4” by 7” for the supported pistol class in senior olympics. Any suggestions?

Maybe start a thread asking that. You'll get more relevant responses than people stumbling across it here. I have no idea personally.

AaronKrebs · Wednesday at 4:08 PM

Have you been looking for a zero eye relief prism scope in the states? Maybe you've found the Element "immersive series" coming in at over $600? Yuck! This Immersive brand scope comes from the same factory, at less than half the price. I have ONE of these available for $299 SHIPPED. THIS IS BRAND NEW, NO FINGERPRINTS (can include fingerprints for an extra fee

)

SilentSquirrel · Wednesday at 4:05 PM

This listing has been renewed

Bayward · Wednesday at 4:03 PM

Thank you everyone for all the responses.

I have one of the GX filters but never used it thinking I was okay filling only in a relatively dry room, my A/C shop. I have set up the nitrogen cylinder I originally was going to use and have filled the gun once using nitrogen. Have not seen a hint of vapor since after about 40 pellets. Gun is almost ready to be filled again. Groups are excellent for an amateur shooter. The POI never moved back though. Not a problem as I zeroed the scope for the new POI. Still curious why the POI moved though.

If there was moisture in the gun will shooting with nitrogen dry the internals out? I am mechanically capable but would rather not disassemble a new rifle.

The Patchworm looks like a good cleaning device. I bought a different one with the gun and a bottle of AoA cleaner/degreaser but have not used it yet.

I do not own a chrono so have no clue how many fps I am shooting. I keep the Ghost power wheel on 9 mostly getting 60~70 shots out of a full fill.

Tricky-Dicky, thank you for those things to check other than moisture.

miksatx · Wednesday at 4:02 PM

Ultralight said:
Thanks for sharing. Is yours .22?

Anyways, with the .25, when you set it, there are TWO stages. First and second click as one pushes the pellet in. Do you have two distinct clicks too? Do you go one or two clicks in? Looks like TWO.

I tested no seating, 1 click, and 2 clicks. About 20 shots in each. No difference that I can tell.

Yep on the .25 2 places that are tighter but it the one I'm using a red dot. So I don't get the accuracy as .22 and .177 GK1.

rangur1 · Wednesday at 4:00 PM

Have 2 tins 33.95 JSB MK2 pellets unopened, 2 tins H&N barracuda 30.8g , 1 unopened, other has about 40 left. 1 H&N Hornet almost full, guessing about 125 left. Lastly 1 half full tin of predator GTO 16.5g . $60 shipping included, PayPal F&F , conus, thank you.

elwoodblues · Wednesday at 4:00 PM

AAC98881973 said:
This is my current refill situation. The tank is out of hydro and I do not know anyone in the area that has a compressor...to refill on the regular. Given the current set up what are my option in terms of a smaller tank? I have been thinking about the smaller carbo fiber paintball tanks...Only looking to fill a tank to 3000 psi.....refilled a PROD.... What kind of adaptor would i need to transition into that they of tank.? Any and all information would be great.

View attachment 571402

Why don't you get it hydro tested cost's about 30 bucks, What city are you in or near?

kahu · Wednesday at 3:56 PM

I put myself on the list when I first saw it... two parts/items basically, and not difficult to install from the looks of the video. 8^)

Latest activity

Latest activity

Question N/A is TUXING the same as AIRMARKSMAN?

Barrels WTS Epic 2 550mm LW polygon 25cal - reduced

Projectiles SOLD Array of 22 cal pellets - sold pending funds

Optics SOLD Immersive 10x24 X-Mas Tree, HUGE fov!

Projectiles SOLD 25 cal pellets - sold pending funds

Filter

Question

N/A is TUXING the same as AIRMARKSMAN?