Latest activity

ndwind · Wednesday at 5:43 PM

I wouldnt touch a Tuxing with 100 foot pole. Junk and good luck on parts! Justmy experiance.

Perle · Wednesday at 5:40 PM

holy smokes.
Not good for their name at all

Trucker3573 · Wednesday at 5:38 PM

Most likely both companies use the exact same manufacturer. I wouldn’t touch either one. Going to be a throwaway unit. Buy a gx cs2 from gx pumps official website. There is good part availability for them and if you do have to work on them they are simply built.

JoePolanco · Wednesday at 5:38 PM

igolfat8 said:
Joe, do you have any targets posted from outdoor shooting sessions? Seeing that many have gone to .30, do you find that .25 is better at 100Y than .30 In open air?

I have been and remain a .25 caliber shooter. I'm a big believer in science and regardless of the plethora of anecdotal evidence, the physics are hard to dispute. BC and areodynamic physics are squarely in the corner of the.25 caliber.

dk-duck · Wednesday at 5:35 PM

SciueraPlumbea said:
Did you allow the trigger linkage to rotate?

Do you pull the trigger and get nothing?
Or a click

hi buddy hope thing's are well, if i knew you're name ii would be helpful lol

just a quick question if you could help please, I've ordered the huma regulator but they don't give any tracking details and I'm in the dark lol not knowing where it is? I've had my partner have a look but she can't get anywhere? I only ask you because you and one or 2 other's know about my problem's etc, I may WhatsApp them and see how to go from there it was ordered last Friday. thank you

EliteAirCustoms · Wednesday at 5:35 PM

This listing has been renewed

Trucker3573 · Wednesday at 5:34 PM

No idea but 400 is insano land as the tuxing cylinder can be had on Amazon for just over 100 bucks. I bought one from there and seems as good as anything.

redsman · Wednesday at 5:34 PM

This listing has been renewed

ZeroVibe · Wednesday at 5:27 PM

Just did another sheet prone, only using minimum magnification (4x). I did up using illumination, I simply couldn’t make out crosshairs at all otherwise.

DR OF AIRGUNS · Wednesday at 5:27 PM

Want to buy let me know what you have and how many

Ievgen721 · Wednesday at 5:25 PM

Yes, this rifle is tired, not NIB.

ZeroVibe · Wednesday at 5:25 PM

Positional shooting from a tank trap, approximately 19 yards. Once I broke the shot, I immediately move to a different position but no timer other wise. Just tried to go at a rapid pace.

JoePolanco · Wednesday at 5:21 PM

shamu said:
I've watched videos and read posts about adjusting the Mora regulator. They say to degas the gun every time you make adjustments. The latest manual from RTI says that you can increase the 2nd stage reg by turning the adjustment screw clockwise.. To decrease reg pressure it says to Crack open the bleed screw and turn counterclockwise. Only mention of degassing is when you adjust the 1st stage reg which is rarely done.
Is this procedure revised since the earlier Moras?

MRG · Wednesday at 5:12 PM

Croxton63 said:
Once you have 10 posts (to help reduce the likelihood that you’re a bot or a charlatan) you can sell it on the classified section here. There are a lot of scammers around. Anything that you can do to show you’re not one will reduce the wariness that people naturally have. If you contribute to discussions and ask relevant questions it helps establish your credibility. I have bought a few things (and sold one thing) on these classifieds, but before I deal with a seller or a buyer I take my time and read through their posts to work out if I want to interact with them or not. Responding to this will get you a 7th post.

Thank you for explaining how this works.

Powerstroke · Wednesday at 5:12 PM

Purchased about 3 months ago. Excellent condition. Works as advertised!
$435.00 Shipped…

PayPal Only!

tstrever · Wednesday at 5:09 PM

This listing has been renewed

Struckat · Wednesday at 5:09 PM

AA Falcons, 13.43, all of my .22s shoot them well.

beerthief · Wednesday at 5:08 PM

Sighted in Diana model 60 .177 Tenex 4.52 8.4 grain 580 FPS

@ 20 yards

rrann · Wednesday at 5:08 PM

Hey everyone, sign up and come out to Raton. It's a great place to shoot, beautiful scenery and visiting with everyone makes it all worth the trip!!!
The N50 Group works hard to put this match on!! ...So COME ON DOWN Y'all...
Randy

shambozzie · Wednesday at 4:57 PM

Come
on guys, 175 yds on a ground sqirrel with 100 fpe will do it humanity. Add a little 5/7 wind to the mix, squirrel not practically instered in photo-op. Your s#^@ better be right . A hpbt at that distance works for me. We,all want that head shot.

rangur1 · Wednesday at 4:51 PM

Have a replacement air tube epic sells. 240cc tube with 101cc plenum. The plenum has a scuff on it. Tube is new. $85 PayPal F&F, conus, shipping included. This is just the 2 tubes, no reg or end gage. Just as edgun west sells them. Thanks.

james722 · Wednesday at 4:48 PM

I just read this on HAM.

Have A Macavity Arms MA2 PCP Air Rifle? You Must Read This! - Hard Air Magazine

If you have a Macavity Arms MA2 PCP air rifle you must read this! The company has issued an urgent Service Bulletin related to the product.

hardairmagazine.com

TonyG_865 · Wednesday at 4:48 PM

Does anyone know if Tuxing and Air Marksman are made by the same manufacturer? or if they work together in some sort of capacity? I'm asking because I wanted to buy an Air Marksman air cylinder and my local airgun shop tried to sell me a Tuxing air cylinder 580cc for $400 and say that it's an Air Marksman and the only difference is that it says "Tuxing" on the bottle. To my knowledge, Tuxing is a completely different brand than A.M.

rangur1 · Wednesday at 4:44 PM

Have an Epic 2 LW polygon barrel 550mm. Comes with transfer port and valve and o ring. Slight scuff by muzzle on the 1/2x20 adapter. Lightly used. No more than 40-50 shots. $285 shipping included, PayPal F&F , conus.

WillM · Wednesday at 4:40 PM

I’m the one who told you to twist and it works for me. Didn’t seem especially tight.
I have been getting fliers randomly with my .22 BW to the point that I took it in to AOA and they pulled the shroud, pulled the barrel and checked everything and got it to shoot a good group at 20 yards. I have not been able to replicate that even though I can do it with my RW so it’s not me.
Today I shot with shroud off and on and grouping is worse than ever - 6” and not consistent shot to shot although I did get three shots out of 25 to touch (and then the fourth was inches away).
I looked at barrel and muzzle with Borescope and don’t see clipping but barrel seems to be very leaded so I’m going to clean it (again) and maybe polish it.
Suggestions or ideas appreciated

Latest activity

Latest activity

Projectiles NLA EXACT JUMBO MONSTER DIABLO 22 25.39 REDESIGNED

Chronographs SOLD Garmin Xero C1 Pro

Accessories WTS Epic 2 Air cylinder and plenum - reduced

Sticky Macavity Arms Have A Macavity Arms MA2 PCP Air Rifle? You Must Read This!

Question N/A is TUXING the same as AIRMARKSMAN?

Barrels WTS Epic 2 550mm LW polygon 25cal - reduced

Filter

Sticky

Macavity Arms Have A Macavity Arms MA2 PCP Air Rifle? You Must Read This!

Question

N/A is TUXING the same as AIRMARKSMAN?