SilentSquirrel said:

@AirShootist
Just what I was looking for!
Thank you
However, it is hard to tell from the video
How much length does the Huben regulator coupled with the Tuxing .36L bottle add, please?

Thanks
Edward

Click to expand...

They are the same length of pull, which is why I used that bottle. Initially I tried a 420cc but it made for a super lanky LOP. The 360cc is perfect. And it will fit the factory stock band. There is a link for all I used in the video desription

MongooseV8 said:

I wonder if this might be the answer for the "too much power" 22Cal Condors out there in the wild. I have a 25Cal Condor 24" barrel I might have to try one of these regs. I was thinking maybe use a full 580cc bottle over my shoulder like with the Maddog stocks?

Click to expand...

It absolutely is the answer. And you will get a gob of shots with that barrel length especially with a 580cc botttle

use less oil, with PCP's, only use what is needed, excessive oil will cause dirt to stick and collect on the gun, I use 5-10 drops of Silicone oil Every 20 fills of air, applied through the fill port hose, it is only for lubing the O-rings just enough internally, to much can cause O-rings to swell and will create a possible leak, so in this case too much of a good thing is bad..... go a bit easier on the oil....

Think i am done with shipping . If i can not drive and F2F cash , no deals . retired so i will drive most any where depending on what the deal is for or how bad i want it . I was just about to drive to FL but the deal fell thru.

Nice! I am looking at doing something similar in my garage. Darn truck is to long and doesn't fit, and just collecting crap now. Would make it better than the house, but the winters make things tricky up here.

Ezana4CE said:

@vmaxpro NOW you’ve really piqued my interest. Are you using a choked barrel? Do you plan on doing other mods?

Click to expand...

No choke Tj .25 I think 1:22”? Its been sitting on the shelf for a long time I forget lol. I know I ordered it for pellets. Turning down the tp adjuster for hades at around 42ftlbs is almost perfect. The shot count is insane and superb accuracy inside 50 yards.

crowski said:

I’m near the end of buying rifles. Have my springs. I’ve been sniffing around for custom stocks for quite some time now. With no luck. A year+ ago when the Pound and Euro fell I tried ordering 3 from Custom Stocks in the UK. Won’t ship over Canadian border, wood restrictions.
They make gorgeous stocks. I‘ve seen so many of yours. Super envious.ck on eBay
Today I e-mailed a few companies here, but they seem powder burners are their mission.
Does anyone know of gun stock manufacturers in Canada?
Need some jewellery on these babies. Crow

Click to expand...

You can check on eBay pending what you're looking for, LP stocks, CV Custom stocks (primarily laminate)... Airgunstocks.com

those are the barrel grub screws in the receiver block, the other 2 holes are for Picatinny rail installation, tighten to about 10-15 inch pounds
BTW, you need to replace the O-ring seal on the Barrel as it is damaged.

This listing has been renewed

Okay. What's the best way too do that?
I am going to order a human reg for it.

beerthief said:

I might have one on the way IF the guy decides to actually sell ,
Keep your fingers crossed for me ! I will drive to FL. to pick it up ( ok and visit my sister also )

Click to expand...

ok fell thru no deal PHOOEY , But now i will get a custom made one from Martin , hopefully ?

Long_Gun_Dallas said:

So, you basically cant import a stock from anywhere?

Click to expand...

That’s what I’m finding. And what makes it confusing is I can buy a gun, which has a stock on it.
They’re really tight on wood, fruit, vegetables and meat crossing the border without inspection. Always been that way. Crow

Bhuntin said:

Mad dog stocks Doug makes nice stocks and good guy

Click to expand...

Thanks, checked out. Can’t ship. Crow

i probably shouldn't have a gk1, but i have a crutch of living within driving distance of Kelly, which is pretty awesome!

Kg that stock is almost $400,it sure is adjustable though.I would ask RAW to make me a .177 in what you want,that may be a better way.

Check to make sure the bleed valve is closed and you don't have any leaks on the hose, check for loose hose connections and loose filter housings, if all checks ok call Umarex

JaceSpace1369 said:

Because I gave my rifle and magazines for Orion to design the 3D versions back in March. Also the face plate geometric design with the shine is the same as what ORION does to all of his mags.

AGT Uragan / Vulcan / Vixen Magazine *2 PCS* QD Fox | eBay

These Magazines will fit the Uragan, Vulcan, and Vixen Airguns. Upgrade your Uragan, Vulcan, and Vixen Airgun with this high-quality magazine, available in four calibers (.177. 22. 25 and. 30). Precision design for smooth feeding and durability.

ebay.us

AGT - Uragan/Vulcan – Orion Iguana Hunter

Enhance your shooting experience with the AGT Magazine, designed to deliver reliable performance and seamless compatibility with Airgun Technology (AGT) rifles. This upgraded version is perfect as a replacement or spare for your airgun. Shot Count Per Caliber: .177 (4.5mm): 15 shots .22 (5.5mm)...

orioniguanahunter.com

New AGT Magazines by OrionIguanaHunter!

Got the word from @PalmBeachAirguns about 2 weeks ago that he was looking for someone to send him a rifle so he could make some. I was more than happy to help! I spoke with @orion last week about sending my rifle to him, I just got it back yesterday along with 1 mag in each caliber except for...

www.airgunnation.com

Click to expand...

My point was that the base designs for magazines are all over the 3d web sites. Once you have the base design for the style self indexing magazine then any *new* magazine is a variation on a theme. Adjusting the form factor is not that difficult. Especially with 3d scanners. The basic wheel of caliber and count and spring with a specific frame.

Original design in the 3d printing world is the exception.

AGT Magazine

longdog said:

Hard to believe that you’re having so much trouble with your GK1s.
I’ve had my 25 a couple of years and shoot almost daily.
Absolutely zero problems shooting 24 grain JTSs at 880fps and extremely accurate if I might add.
No jams ever!
As I mentioned in a post early on in this thread, “some people shouldn’t own a GK1”

Click to expand...

Is it the reading or comprehension the issue with some people? I HAVE 2 GK1’s, actually 2.5 if you count the .177 barrel/mag… but i dont recall mentioning that so. In almost every post of mine im comparing the two .. my 25 IS PERFECT with 0 issues. I just swapped the calipers and ran the 25 barrel on the 22 block and it shot great. That is where we are at now. Also ive replaced the main seals and valve o-ring in the 22 block for other issues i thought were related but were not .. not a easy task btw.
So its clear i am not just some novice that “shouldn’t own a GK1” smh
I also have a FX Pathera compact that was converted to a dynamic, 2 Avenge X’s, Fully modified Notos, and a AEA 50 cal Harpoon.
Also the guns that started my airgun addiction. Gamo arrow, Urban and 2 springers, 4 co2 pistols. No major issues with anything else but the 22 GK1 .

Well I’m glad the one guy that will defend karma to his grave loves them and has had good luck. For me and me personally having no first hand experience with karma have to go off what I read. I’ve read a pretty decent amount of negative things about particularly the eq. That is all I have to go by. Yes there are also many negative posts about FX. The difference is they have sold probably 100x more guns. Therefore, at this point in time I’m not willing to take the karma journey . The closest experience I have that relates to all of this is having owned a Skout epoch. That was a relatively new gun on the market. I personally had zero mechanical or functional issues. Now go read the last several weeks of the everything epoch/evo thread. Plethora of problems all over the place. To be honest I probably wouldn’t buy another one at this point in time even though I had a great experience . To each their own like said above it’s all opinion. Maybe karma will change my mind down the road. It’s certainly open.

Mad Dog is limited; I see no springer stocks.Sometimes Steve Corcoran will have some made up. You can try Richard Microfit Stocks, you will have to do the finishing yourself, Boyds has Maraurder Stocks.Too bad you can't get the Custom Stocks. Fajan is an old stock maker. I do not know if they are still in business. A guy up in Napa, Calif., used to make custom stocks ....Good luck, I think you may have to get the Microfit stocks and do the final work yourself...

I kinda wish my NOTOS was a .177.

Dropped, sized and tumbled a nice batch of NOE 217 30 FN BT. 200 at an average 27.40.

Jnewood said:

Click to expand...

Nice clear footage. Very nice.

Two TX200 lefty's , both .177 would like to get another HW77 (have .22 want .177 and IF i can get it .20 long not k )