Latest activity

CanMike · Aug 17, 2025

I wonder if we can convince FX to make a 14 twist. Would be interesting to try.

Mike

mthoople · Aug 17, 2025

This listing has been renewed

boscoebrea · Aug 17, 2025

So I take it you're still waiting? Let us know when you get it.

RoosterCogburn · Aug 17, 2025

We all know and love the.long going "Head Shot Thread". A head shot doesn't always present itself as the best option. Show off your heart and lung punches.

I'll start

Chipper at 37y. Had been raiding the feeder and digging tunnels all over.the place. Waiting for him to present a shot all morning. Had him in the crosshairs around 9:50 but a chickadee alarm call sent him darting. Just about 10min ago I see him working down tbe berm from a tunnel entrance. Straight to the feeder. I hit him on his return trip. A tree trunk was in the way of the headshot so I chose thoracic treatment. You can see the peanuts and sunflower kernels he was carrying with him

Fx impact mk2pp, 700 superior, 23gr .218 HP slug @ 980fps.

jcbii · Aug 17, 2025

HW30, R7, and Marksman Model 28 - All pretty much the same airgun and I have one of each

6gun · Aug 17, 2025

rc4fun said:
OK it's fixed, I wanted to wait and see if it leaked over night, all is good. Once I ignored the air drain through the 1st reg and looked for the real leak it was easy, Thanks @6gun. The E 100 o rings were bad. Strange now that it's not leaking it no longer drains air through reg #1 when the bottle is removed.

When you have to degass with the bottle removed I recommend not firing it down to 0 but use the bleed screw on the side of the action block so you avoid over travel on your valve and potential oring damage.

Impact701 · Aug 17, 2025

Strelok App

Applied Ballistics App

I've noticed 1:16 twist barely stabilizes 40gr slugs according to the ballistic apps I use, especially when it is below 40°.

6gun · Aug 17, 2025

Amadorshooter said:
Hello, im new here and too pcp rifles.
I just bought my first one and its a AEA 30 Bullpup 24".
Any ideas on where to start with basic tuning?
Im going to put some pellets through it today with the crony and see what I can do

Aea stuff I'd basically just tune it down from full blast over a chrono. There's not much tuning available or needed. They just punch way above their weight and often beat themselves up. So i turned mine aea model down till it had nice manners for the entire shot cycle.

Amadorshooter · Aug 17, 2025

STEVEY said:
I live in MA and get great support from BIN. Great customer service.

Have you done any tuning on the bullpup?
If so what did you do?

Bhuntin · Aug 17, 2025

Long_Gun_Dallas said:
So, you basically cant import a stock from anywhere?

Mad dog stocks Doug makes nice stocks and good guy

Conrod · Aug 17, 2025

brian68dee said:
My go to squirrel rifle is my Avenge-X in .22, as for optics I went with a Discovery Opt 2-12x, Look up a review on it on YT, and there should be a 10% discount code in the description. As for extra magazines, they use the same mags as a Benjamin Marauder and Umarex Gauntlet 1/2, But I'd also check out qd_fox, His after market mags are better and tougher than OEM.

What pistol would you recommend for 25-30 yards, and able to use one hand only?

Bigbaby · Aug 17, 2025

PumaCarl said:
You all have pretty short memories. Recently, Ana Rose Spanagel, using an Avenge-X .25, with a factory barrel, beat all comers in a 3 card 100y benchrest match.

A local competition with 13 participants doesn’t equate to “all comers”. She evidently has a nice shooting air rifle and is very skilled with it, but that doesn’t put the Avenger-X on the same level as the better guns. My Avenge-X is collecting dust after chasing POI shifts for months, and after adding barrel bands and harmonic stabilizers. I finally bought a better gun, gave my Notos to my grandson and took the scope from the Avenge-X to use on an air rifle with repeatability of shot placement.

JaceSpace1369 · Aug 17, 2025

Ratzy said:
How do you know it is Orion's design? Lots of files on Yeggi and various other sites for magazines. Is it possible the QD_FOX was first?

Because I gave my rifle and magazines for Orion to design the 3D versions back in March. Also the face plate geometric design with the shine is the same as what ORION does to all of his mags.

AGT Uragan / Vulcan / Vixen Magazine 2 PCS QD Fox | eBay

These Magazines will fit the Uragan, Vulcan, and Vixen Airguns. Upgrade your Uragan, Vulcan, and Vixen Airgun with this high-quality magazine, available in four calibers (.177. 22. 25 and. 30). Precision design for smooth feeding and durability.

ebay.us

AGT - Uragan/Vulcan – Orion Iguana Hunter

Enhance your shooting experience with the AGT Magazine, designed to deliver reliable performance and seamless compatibility with Airgun Technology (AGT) rifles. This upgraded version is perfect as a replacement or spare for your airgun. Shot Count Per Caliber: .177 (4.5mm): 15 shots .22 (5.5mm)...

orioniguanahunter.com

New AGT Magazines by OrionIguanaHunter!

Got the word from @PalmBeachAirguns about 2 weeks ago that he was looking for someone to send him a rifle so he could make some. I was more than happy to help! I spoke with @orion last week about sending my rifle to him, I just got it back yesterday along with 1 mag in each caliber except for...

www.airgunnation.com

Treefrog · Aug 17, 2025

That's cool!

Cheers,

J~

Ratzy · Aug 17, 2025

JaceSpace1369 said:
For those considering getting mags from QD Fox those are straight ripoff from Orion.
@Sleestak

How do you know it is Orion's design? Lots of files on Yeggi and various other sites for magazines. Is it possible the QD_FOX was first?

Ratzy · Aug 17, 2025

brian68dee said:
The thing I worry about is what tariffs will do to the prices of even non-Chinese rifles, the materials they use also comes from countries subject to tariffs. The hobby is expensive enough already.

Material tariffs *should* only affect domestic production. Tariffs are generally based upon origin of final product not origin of raw materials. Bunch of exceptions to that like final assembly from majority imported parts from higher tariff country.

RyanCO · Aug 17, 2025

Found these little vintage target disc's for $2 at my local thrift. Winner winner.

JaceSpace1369 · Aug 17, 2025

cyknife said:
I sold my sightmark wraith 2-16 to fund a dnt zulus. The zulus I picked was without lrf because $306 from tac-panda.....$200 less than a lrf version

I dont have the dnt yet but am wondering how big of a deal the lrf is? I'm sure the zulus will out class the sightmark unit if only by weight alone.

Somewhat excited to try the zulus!

Non LRF is a good option if you're going to keep things close and dont need quick adjustments. Say 50yds and in.

Amadorshooter · Aug 17, 2025

Hello, im new here and too pcp rifles.
I just bought my first one and its a AEA 30 Bullpup 24".
Any ideas on where to start with basic tuning?
Im going to put some pellets through it today with the crony and see what I can do

rc4fun · Aug 17, 2025

OK it's fixed, I wanted to wait and see if it leaked over night, all is good. Once I ignored the air drain through the 1st reg and looked for the real leak it was easy, Thanks @6gun. The E 100 o rings were bad. Strange now that it's not leaking it no longer drains air through reg #1 when the bottle is removed.

M4Slugger · Aug 17, 2025

Nicely done Time says 5:47 am. Coyotes around here are extremely smart.. They won't get near a trail camera and if I put out food they rarely if ever come to it..

Lord hartcliffe · Aug 17, 2025

Mine is the Pro sport I didn’t get on with the .177 so I sold it and bought the .22
Definitely a keeper now perfect springer

.22

.177

MACTEN · Aug 17, 2025

airman_o said:
I love the tactical handguard. But one think I'm wondering: is the clearance from the barrel wide enough so you can properly use the m-lok slots for mounting i.e. a picatinny rail? Or is is more for the looks?
In my experience it quickly gets very tight with the m-lok screws (almost) touching the barrel, and that's not good for accuracy.

Most of the screws that come with attachments are 12mm for m-lok . You need to get 10mm.

AJ_Roberts · Aug 17, 2025

What did the M4 ever do to you?

Latest activity

Latest activity

Filter