Latest activity

RMCIV · Aug 16, 2025

Scotay42 said:
A tank is not "needed", a compressor yes.

I have a few gx pumps i use my gx cs4i with the gx filter.

RMCIV · Aug 16, 2025

Dstrac said:
The mora .25 600mm was my first "premium pcp" (over $2k). I bought it 2 months ago. I did like it a lot at first, but I have a slow leak that developed, i found the gun empty. After refilling it you could hear it leaking down the barrel. Cocked it and dri fired it, that did slow the leak down, but its still leaking. Very slow like 10 bar a day. Im definitely disappointed, I expected better for that price point. That being said the mora has been good until the leak.

That's a super bummer...way to much money to be having leaks so early on. How is their customer service?

Struckat · Aug 16, 2025

maxtrouble said:
A .30 caliber is going to require A LOT of air. How are you going to fill it? You are going to need a tank and a compressor. Will have to budget accordingly.

I agree completely. Life is too short to have only one PCP. I settled on five. And a couple of pistols but they don't count. Really, it's fine. Well I might need one or two more now that I think about it.

Pistols don’t count!!!

Remember that. It got me out of trouble the first time I said that to my wife.
Problem was that I was dumb enough to use it a second time…

RMCIV · Aug 16, 2025

Scotay42 said:
The mora is a nice rifle, FX panthera/dynamic, Skout, Daystate. There are tons for benchrest as well. I have a nice USA made Skout Epoch in the classifieds, there are a couple Raw hm1000 in the classies also US made. Daystate delta wolf is in the classifieds, and also karma red panda. Any of those will do what you want.

I think I saw your add it is one of the rifles on my list...I will contact you as soon as the app let's me and if it's still there I'll get more info thanks!

Trucker3573 · Aug 16, 2025

That’s a tough one rifle do all task. It’s just my opinion but I will never be convinced 30 cal in an airgun is a great choice for deer. 357 min and then you move out of a backyard plinker unless ammo prices aren’t a factor. I think if the focus is medium to larger size game something like the 357 mora or western sidewinder would be sweet.

Mandrada01 · Aug 16, 2025

Started working on some custom foam for my Karma EQ hardcase. The case comes with cut foam, but I needs to start from scratch in order to make it work with my Zulus and also make a spot for my Moderator, magazines, etc. so here is my first attempt, not too bad! At some point after I get it all dialed in, I will use some spray adhesive to make it more permanent.

Avator · Aug 16, 2025

All I can say is that I would hate to be a new comer to airgunning today... There are way to many options available and many will fit specific needs. Add to that the fact that everyone has an opinion on what is better than another.
But wait... it gets worse...
Many look to online reviews to help them choose.. so misleading are these guys pumping out these great reviews in the hopes of getting the next free gun to play with. Have you ever seen Guy Fieri on Tripple D spit something out and claim it tastes like crap? Well, maybe an egg.
I think I would just have to jump in and grab something that appeals to me. Then I would hang out on one of these forums and listen to the real World users with an open mind. Makes some friends. Many of us are more than happy to have fellow airgunners over to try out our guns... we are proud of them.
A range that permits airguns is another good place to join and hang out.

Struckat · Aug 16, 2025

How did you come by this nice little rifle and why do you want to sell it?

walther · Aug 16, 2025

marflow 777 said:
i am deep down the chaser rabbit hole
View attachment 448560 View attachment 448561

Hi marflow very nice build. What velocity and number of shots do you get with the 13" barrel? My chaser only has 8.2 inch barrel I get about 465fps with about 4 mags. But still loud with wasted gas. I just received a brand new 19 chaser barrel to cut down into a carbine length around 12" but have not settled on length yet. I also got a right hand unmarked stormrider style breech to finish its rifle mode.

Scotay42 · Aug 16, 2025

maxtrouble said:
A .30 caliber is going to require A LOT of air. How are you going to fill it? You are going to need a tank and a compressor. Will have to budget accordingly.

I agree completely. Life is too short to have only one PCP. I settled on five. And a couple of pistols but they don't count. Really, it's fine. Well I might need one or two more now that I think about it.

A tank is not "needed", a compressor yes.

greenbeans · Aug 16, 2025

357cal said:
Have you tried to remove different sections of the Yokozuna? Making it shorter will change the harmonics.

Nope… I run the yoko on a gun that likes it (without the QD), otherwise mostly Falx now.

Avator · Aug 16, 2025

OldVet said:
Yes also known as what you said the numbers spelled out. But at Midway it's
"Diana 250 with Scope"

Just so you know.. those guns that are spelled out are Chinese guns rebranded by Diana. I have the Two Fifty. I like the gun but it has a heavy trigger and a harsh shot cycle. I had to put a Hammers scope on it. They are NOT German made Diana guns.
Might want to question Midway on that.

Dstrac · Aug 16, 2025

RMCIV said:
What would be a good first premium pcp? I've been looking at the RTI Mora, what others should I consider?

The mora .25 600mm was my first "premium pcp" (over $2k). I bought it 2 months ago. I did like it a lot at first, but I have a slow leak that developed, i found the gun empty. After refilling it you could hear it leaking down the barrel. Cocked it and dri fired it, that did slow the leak down, but its still leaking. Very slow like 10 bar a day. Im definitely disappointed, I expected better for that price point. That being said the mora has been good until the leak.

cavedweller · Aug 16, 2025

I bought a used .25 HMX1000 from someone on AGN and it showed up with no 1/2" unf thread protector...
I called Airforce Airguns aka RAW and shazam... they sent me one right out at no cost.
Now that's service!

steve123 · Aug 16, 2025

Thanks for your advice Alan.

You'd know more than I about this kind of thing. I can't wait to get it fixed and when the warranty is up I'd like to learn how to work on it.

In the instructions it states not to fill over 300 bar or the gun can be damaged and since this was my first fill I'm fairly certain the problem was my fault this time.

I hope this Venom turns out more reliable than my Skout EVO is. I guess I'm getting used to airgun problems because of the EVO, problems I didn't cause.

DesertSilver · Aug 16, 2025

Is your shooting going to be mainly in the back yard? How close are your neighbors? A .177 Cal is cheaper to shoot and uses less air per shot . It also doesn't carry far so if you are shooting at a squirrel and miss you don't have to worry about hitting someone or something and damaging them or it. You need to take into consideration how much hand pumping to shooting is acceptable.

Tricky-Dicky · Aug 16, 2025

Ada said:
As far as I know Chronies are a bit like decibel meters, difficult to compare their numbers to other chronies , but they do make perfect sense on their own ,as long as you use the numbers from only one to come to a conclusion.
I own an FX pocket chrony and after i serviced my regulators my speed differences over +-80 shots are +- 1-2 fps, if the hp reg climbs a few psi i might see a 3 fps difference.
That is all done at the range, I will put some pics up of the range which I am very fortunate to have all to myself at the moment!

View attachment 584740

View attachment 584741

View attachment 584742

View attachment 584743

Is that FX chrono mounted to the mlok rail directly? And if so do you by any chance have a print file for it?

Charles Dueck · Aug 16, 2025

I have really been looking for a lighter Hollowpoint mold for Texan .457 CF carbine. Noe has them forsale but are never available so wondering if anyone here would have one they were willing to sell?

Boomer1974 · Aug 16, 2025

rdtricks said:
The pin does not go through the plastic piece and only a small hole is utilized to hold the guide pin. Makes me wonder if you got a defective part originally or the piece sheared off somehow. Looking at the Pyramyd Air Air Venturi schematic page for the Avenge-X, I see the entire unit is being sold as a 'kit'. That is a good price as several years ago just the poppet cost me $40 for my Nova Liberty. Hope you are able to get it repaired and shooting soon.

Did you see this picture? Thats the old one out of the gun

Emu · Aug 16, 2025

Struckat said:
I always want a do all. Never works for me.

.25 Cal at 68 fpe is enough for javalina and coyote with a well placed head shot.

BriarpatchMtn · Aug 16, 2025

Received my extra magazines for my .25 Bullshark yesterday evening. Quick test, felt good to be able to shot 40 rounds with out stopping to refill magazines, also shots down to my 150bar reg setting.
NOE .250-27 pellet mold just arrived. Didn't know these came with additional pins so can do 3 different grain weights. Will have to test them all. Cleaned mold and have it seasoning in the oven. Once I finish lunch I'm going to heat up the lead pot.
Guess what I'll be doing tomorrow.

rdtricks · Aug 16, 2025

Why does this posting seem suspicious to me? Maybe I am just not a very trusting person, but. . . .

OldVet · Aug 16, 2025

r1lover said:
A lot of answers will steer you in the same direction, but you gotta arrive at the recipe that works best for you. Identify and focus on the points that have the greatest influence on accuracy; fore end hand positions, firmness of fore end grip, cheek position, cheek contact pressure (lots, little, none), firmness of butt against shoulder, etc., then experiment. Absolutely resting the fore end on a firm surface will kill accuracy just as an inconsistent hold and a lot of "twang" (spring vibration) will. It's generally accepted that a firm grip is a no-no with a spring gun but I had a Beeman Kodiak .25 that had to be held very firmly to get good groups. A good starting point for anyone with a "magnum" spring gun is an aftermarket spring/guide/seal kit that fit together properly to minimize twang. Did you buy your gun new? The 350 is a powerful gun I believe should shoot 8.4's faster than 888 fps. Have you checked a string to see if the MV is consistent and there isn't something else going on? Maybe some other owners can chime in. Also try shooting heavier pellets like JSB 10.34's to see how they group. Good luck.

The 350 barrel date is 04/06 ,so it's 19 yo. I put a new 12 ft lbs spring kit in it. It's now running smooth , when I took it apart the original spring was broken that was the problem. Shot some same hole groups now.

cjtamu · Aug 16, 2025

crowski said:
Out with a gun second to none. A Pro Sport .22. View attachment 586475This one is a keeper. Crow

Nice. Hoping to join the club soon. Just waiting on the man to tell me it’s packed and where to send the money.

Struckat · Aug 16, 2025

20 pumps to max? I couldn’t tell how high he pumped it. Looks clear to me that I couldn’t as I don’t weigh enough.

Not so sure he knows anything about the gun.

Latest activity

Latest activity

Accessories SOLD Looking for light .457 Hollowpoint Mold

Filter