Latest activity

SUNSET · Aug 16, 2025

Ranchibi said:
Johnny, congratulations! Weihrauch makes overbuilt tough, accurate PCP's! Pics when you get it please!

Wadcutter · Aug 16, 2025

Always great to find a good one that's local. If original, it will have a leather piston seal.

joelayfield · Aug 16, 2025

i have thoughts about that , if you take all the money out of selling hard to find parts " soon they wont be a complaint about price but a complaint that no one sells them any more ! parts will dry up if you dont allow them to make a buck , shipping is work as well as a expense . last time someone wanted to trim everything out of my job i thought about what it took to do the work and what i would make and decided i had other things to do

lwm211 · Aug 16, 2025

$$ SOLD $$
Decided to part with my safe Queen, has not seen any use since acquiring my Huben's.
HW 44 Pistol/Carbine is like new .177 caliber. The air cylinder has been replaced with a NEW rat works aluminum carbine length HW110/100 that gives a shot increase of 40%, and is lighter in weight than the smaller original tube. The butt stock set up includes a Mission First Battlelink Minimalist commercial stock six adjustable positions and tube. Length of pull max 14 1/2" Overall length less moderator 22 1/2" -25 1/2" Remove one screw and stock slides off. Includes owners manual, illustrated parts breakdown, HW Moderator, 2 magazines, fill probe.
SCOPE/RINGS BIPOD NOT INCLUDED
$785.00 SHIPPED

woogie_man · Aug 16, 2025

I may do that here on Monday. I know shipping is typically a pain... but dayum!

Bigbaby · Aug 16, 2025

It probably wasn’t leaking at the gauge, most likely the 3 (yes 3) O-rings on the pin that goes between the blocks #80 on diagram. You can order replacement gauges from Pyramyd Air.

Brianburgess11 · Aug 16, 2025

Kgphotos said:
I've been doing a little research regarding target rifles. I haven't ever competed and don't have any immediate plans but hopefully down the road I may give Silhouette and Field Target a try. So for now a target rifle will just be for my enjoyment shooting silhouettes and other various targets. One rifle that really has my attention is the Walther LG400 FT. I have a couple questions for those that own or have shot this rifle. Since the FT version doesn't come with sights I was wondering if it was possible to add aperture sights in the future. Can the parts be ordered from Walther to add those type of sights so that I can also use the rifle for ten meter style shooting? Along that same thought, I know that the LG400 has an adjustable hammer spring. How far can you reduce the power using just the hammer spring and NOT touching the regulator? Can you get the fpe down into the ten meter target range? Thanks for any help that you can send my way.
Kenny

Did you ever get that lg400? I ordered one but it showed up with a broken stock and butt plate so I’m waiting for them to ship me another one so I haven’t got to try it out yet, super anxious waiting for the other one to come. Just want to know how it went.

Avator · Aug 16, 2025

Bigbaby said:
I fill from my tank so no breaks from the heat to refill my AR, the tank usually lasts a week then gets topped off inside. Even inside, I run the compressed air through a couple of moisture absorption filters to ensure no moisture makes it into the tank and then my AR. If I stopped shooting to refill my AR with the compressor, I’d probably get distracted and end up taking another nap.

I looked you up... you're quite a ways down there. I'm up here just south of Montgomery.

cjtamu · Aug 16, 2025

beerthief said:
love the rounded pistol grip on these old ones , wonderful find worth twice the distance .
(isn't 33 miles considered close in TX. miles ?)

Kim drives 55 to work one way and when I go to the office mine is 70 one way. So 33 to pick this up was a no brainer. Cleaned up nicely, barrel is only thing that could use re-bluing. Two things were obvious after a closer look. Someone loved this gun and used it, this was no safe queen. Two, they took excellent care of it.

Crow, we and a whole lot of other people now feel the same about B&D Air. At best they’re a 2nd tier international airline now. Won’t get any more of our bidness.

jbull · Aug 16, 2025

This listing has been renewed

cjtamu · Aug 16, 2025

beerthief said:
95 desrees /62% humidity , not to bad . did some shooting with the BSA break barrel .177 Tenex 4.51 8.2 gr , i should take this hunting squirrels . Very light weight gun and accurate 20 or 30 yards Irons sighted in @ 25 yards. If i sighted it in probably could do 40 yds . easily .View attachment 586632 View attachment 586633 if i sighted in @ 40 . ( see the lake way down below this is my back yard range )

What crow said. Wow!

Joshua777 · Aug 16, 2025

super acurate. got this with pressure gauge leaking and now its busted.. wont to move on.

$250 shipped thanks "calls only!" 208-518-7048

fishing43 · Aug 16, 2025

JoeWillie said:
Also try Maple products in Canada , Carm didn’t make right hand loading mags for my HMX .

Will do thanks

fishing43 · Aug 16, 2025

Now you are a full fledged member, congratulations and look forward to your post. Thank you for joining

coastal drifter · Aug 16, 2025

Hateful McNasty said:
I listened to it all. Never know when its a jeopardy category or swinging a deal ...

Waylon, led, doors, and the great florida boys ( not the gospel singers ) Lynyrd Skynyrd . I guess i got favorite from kid to today's . Also theres alot i just cant stomach too. Lol

muscle shoals

Bigbaby · Aug 16, 2025

Avator said:
Looks great.
I was able to shoot a good bit today. I would shoot awhile then duck into the shop or the house to cool off then go back out and shoot some more. I run the compressors in the a/c in the shop so filling guns also gives me a break from the heat. A least the temps are dropping some. We may be over the hump.

I fill from my tank so no breaks from the heat to refill my AR, the tank usually lasts a week then gets topped off inside. Even inside, I run the compressed air through a couple of moisture absorption filters to ensure no moisture makes it into the tank and then my AR. If I stopped shooting to refill my AR with the compressor, I’d probably get distracted and end up taking another nap.

Joshua777 · Aug 16, 2025

ok so bought this used, small leak. went to fix ,made worse. been a leaker since i got it . anyone out their repair/fix/work on these/? thanks j

igolfat8 · Aug 16, 2025

ALL 3 sets of 30mm rings sold pending payment. 1" rings still available.

I have ~~3 sets of Dovetail 30mm FX adjustable height rings~~ and 1 set of 1” FX adjustable height Dovetail rings. I’m the original owner and they are used but not abused.

$55 per set shipped in lower 48. PayPal or Money order.

I’ve sold lots of stuff here with 100% positive feedback so buy with confidence.

Only trade I’d consider is FX Picatinny rings.

cavedweller · Aug 16, 2025

woogie_man said:
Ok guys.... here is one for you.

I have been adding more Theobens to the safe and I am wanting to add more spares to make sure I can keep things running. I took a look over at the RAW site and found the spares that I am wanting......BUT....... the shipping rates are NUTS! For 10 little bits and bobs,

Barrel location screw for Rapids × 2
Bottle "O" rings (pack of 5) × 1
Bolt Circlip × 5
Authentic RAW Rapid Air Worx PVC Patch × 1
RAW Pressure Guage × 1

and the shipping is around $30!! These are all little parts that should be able to fit into a padded envelope!

Is there another source for reliable parts that are not going to cost half the amount of the of the parts for shipping?

Call RAW and discuss

DeanB · Aug 16, 2025

BriarpatchMtn said:
A few minutes with a utility knife. Junk into a target stand. Leave out in the weather no problem. Shot it and break it, easily replaced with another piece of junk.

View attachment 586415

View attachment 586416

View attachment 586417

View attachment 586418

View attachment 586419

Neat idea, could of left rest of frame up and put spinners out on the arms.

Joshua777 · Aug 16, 2025

This listing has been renewed

woogie_man · Aug 16, 2025

Ok guys.... here is one for you.

I have been adding more Theobens to the safe and I am wanting to add more spares to make sure I can keep things running. I took a look over at the RAW site and found the spares that I am wanting......BUT....... the shipping rates are NUTS! For 10 little bits and bobs,

Barrel location screw for Rapids × 2
Bottle "O" rings (pack of 5) × 1
Bolt Circlip × 5
Authentic RAW Rapid Air Worx PVC Patch × 1
RAW Pressure Guage × 1

and the shipping is around $30!! These are all little parts that should be able to fit into a padded envelope!

Is there another source for reliable parts that are not going to cost half the amount of the of the parts for shipping?

Cantona256 · Aug 16, 2025

Mandrada01 said:
Yessir,

Pushing a 28 grain pellet at about 930fps. Dressed it all up and will be having smoke rabbit for dinner tmw.

Perfection!

DesertSilver · Aug 16, 2025

The mount looks like the 1 bakers sells for $65

One Piece Scope Mount for Sheridan F and C, Blue & Silver Streak - Baker Airguns

Save $2.98 on scope rings ($21.97 reg price) when added to the order. High profile rings recommended for bolt handle clearance. Rifle not included

www.bakerairguns.com

Avator · Aug 16, 2025

Bigbaby said:
Lower Alabama? I’m in Eight Mile. When it cools off enough to shoot in the afternoons (with a fan and a big umbrella), the showers and thunderstorms roll in. Made it out today to get an hour of practice in with the DRS Tactical .25. I cut my deck railing down for my built in bench.
View attachment 586647

Looks great.
I was able to shoot a good bit today. I would shoot awhile then duck into the shop or the house to cool off then go back out and shoot some more. I run the compressors in the a/c in the shop so filling guns also gives me a break from the heat. A least the temps are dropping some. We may be over the hump.

Latest activity

Latest activity

PCP Pistol SOLD $ SOLD $$$ HW 44 Pistol .177 caliber $$$

​

PCP Rifle NLA Avenge x .22 synthetic tube version. comes with 25. cal barrel.

Air Venturi Avenge x pressure gauge busted when tightened! HELP!!!

Mounts/Rings WTS FX No Limit Rings

Theoben Theoben Parts....??

Filter