Latest activity

Shortcut · Aug 16, 2025

Great shooting. You and your Mora a making out to be a great team!

Superpete · Aug 16, 2025

This listing has been renewed

MACTEN · Aug 16, 2025

ram2jeep said:
I have typically purchased all FX rifles besides my Texan and Edgun L. I was rebuilding another regulator for my MK 2 and then working on the valve on my Panthera when I read about the Slash.
I called Tony at Talon Tunes and he convinced me to try the Taipan and that I would love it. I received it yesterday in .22 and initial thoughts are outstanding. You do not need a moderator on this in my configuration: can’t speak on other caliber’s. Build quality is such that when you pick up the rifle you realize this is top tier.
I haven’t run the bottle down to see shot count as of yet. Magazine is wonderful. Easy to load and shoot. With both slugs and pellets neither had problems finding their mark. I shoot 50 to 90 yards in my back yard, mostly woods.
Semiautomatic works wonderfully and I love not having to move my hand to load another pellet. More to come on this I am sure.

Which version? barrel length tactical, standard etc. Good to see you're enjoying it so far. You're right about build quality... not too many are close out there in that regard.

RWC123 · Aug 16, 2025

RMCIV said:
I will be shooting target and hunting..from mice to white tail deer and hog and it needs to do all I can spend 5k but not 20k I'm thinking a 30 cal. I could be wrong but think fpe for deer in my state is 250.

So you you want a gun that is good for mice (4 FPE) to deer/hog (250 FPE).
There is no single gun that is capable of that... You need to consider two guns. Get a .22 cal that can be easily adjusted and a .357 and up in caliber if you are wanting into the 250+ range in FPE.

thom · Aug 16, 2025

I have five (I think) Chinese air rifles and a couple of pistols. On of my rifles is a side lever. I love it especially.

Nitrocrushr · Aug 16, 2025

Nice shooting Joe, congratulations!!!

Steve

ram2jeep · Aug 16, 2025

I have typically purchased all FX rifles besides my Texan and Edgun L. I was rebuilding another regulator for my MK 2 and then working on the valve on my Panthera when I read about the Slash.
I called Tony at Talon Tunes and he convinced me to try the Taipan and that I would love it. I received it yesterday in .22 and initial thoughts are outstanding. You do not need a moderator on this in my configuration: can’t speak on other caliber’s. Build quality is such that when you pick up the rifle you realize this is top tier.
I haven’t run the bottle down to see shot count as of yet. Magazine is wonderful. Easy to load and shoot. With both slugs and pellets neither had problems finding their mark. I shoot 50 to 90 yards in my back yard, mostly woods.
Semiautomatic works wonderfully and I love not having to move my hand to load another pellet. More to come on this I am sure.

JoePolanco · Aug 16, 2025

Today at the a Southern Ohio Negional N50 match held at the Fairfield Sportsman's Association range, the RTI Mora put up some impressive numbers, easily winning the day.

A bit of badly needed redemption for me provided by the most accurate, consistent and dependable gun I've owned to date.

Poopshoot55 · Aug 16, 2025

Set up the course yesterday with Doug Rogers, was calling for 89 today with light breeze. Got to the club at 8 to set up the practice range, people started rolling in and helped set up, which was greatly appreciated. Had Glenn and Nathan Thomas show up which was a nice surprise. Was about 70 degrees at the start at 9:30 and 85 at 12:15pm when we finished, winds were moderate at 5mph with slight gusts to 10, sometimes switching to our backs. We had one new shooter David who used my seat and borrowed some sticks, hopefully he will be back. High score of the day was Greg Shirhall with a 48 in Hunter Piston. Had 3 cold lines that were resolved quickly. For people who have shot with and know Doug Rogers, he went into the hospital today with health issues, please keep him in your thoughts. Results are as follows.
Hunter PCP
John Solpietro 46 MROD/Challenger Athlon Aries 10.5 Benjamin
Daryl Van Why 42 Benjamin Marauder Hawke Vantage 4-12x50, Benjamin 10.5
Nathan Thomas 41, Crosman Challenger, Athlon 6-24x50, AA 10.3
Rich Sarama 40, FX Crown, Element Helix, FX 10.3
Glenn Thomas 39, Benjamin Marauder, Hawke, 10.3
David 12, Avenger X .22, CV Life 6-24, JSB 18.1
Hunter Piston
Greg Shirhall 48, Walther LGU, Bushnell 6-24, JSB 8.4
Paul Manktelow 38, Walther LGU, Hawke, H&N Sniper 8.5
Eric Brewer 37, Air Arms TX200, Hawke, JSB 8.4
Brian Sarama 31, HW97, Element Helix, H&N 9.5
Open PCP
Rick Vaeth 47, Steyr Challenge, Sightron S6, JSB 13.4
Shawn Pragle 27, MROD, Vector, Benjamin 10.5

TnCnDn · Aug 16, 2025

Long_Gun_Dallas said:
Added one to the fold.

Got as a pistol from Air n Gas Man (with airtube extension). Got real lucky finding an old/obscure Steve Corcoran stock. And a good friend turned down a HW30 barrel for me.View attachment 586659
View attachment 586658

Nice!

ram2jeep · Aug 16, 2025

Another great experience with Tony. I was on the fence of switching from my typical FX to the Taipan Slash Tactical.
Received the rifle yesterday and finally got to give it my full attention; what a rifle the Slash is. Tony got it all setup for me and his numbers were spot on. I am shooting the NSA 24.8 slugs and JSB 25.39 pellets. Pellets are going right at 889 to 895 and the slugs are going 903 to 909.
Thanks Tony for a quick turnaround and the guidance to get me to look at other manufacturers!!

Ranchibi · Aug 16, 2025

SUNSET said:
View attachment 586660

Awesome and thank you for posting pics! Enjoy shooting that beauty!

cvarcher · Aug 16, 2025

BordertownDevil said:
Tell me about your scope mount set up, pretty please!

yes I think its the same as Bakers. -- here his link

One Piece Scope Mount for Sheridan F and C, Blue & Silver Streak - Baker Airguns

Save $2.98 on scope rings ($21.97 reg price) when added to the order. High profile rings recommended for bolt handle clearance. Rifle not included

www.bakerairguns.com

SUNSET · Aug 16, 2025

Hobbyman2007 said:
If weight is an issue , I’d suggest the aluminum tubes available on eBay. They ship from the UK but are drastically lighter than the factory units. They also sell complete but I find the ends to be of lesser quality. Should mention they do have a few lengths available also , you’ll just have to take a few measurements . I went with the FAC 390 mm lots of shots in either .177 or .22

HW100 Lightweight Air Cylinder by Ratworks

AirShootist · Aug 16, 2025

Struckat said:
What size top hat are you using?

I always just use the biggest orifice size

Long_Gun_Dallas · Aug 16, 2025

Added one to the fold.

Got as a pistol from Air n Gas Man (with airtube extension). Got real lucky finding an old/obscure Steve Corcoran stock. And a good friend turned down a HW30 barrel for me.

SUNSET · Aug 16, 2025

Ranchibi said:
Johnny, congratulations! Weihrauch makes overbuilt tough, accurate PCP's! Pics when you get it please!

Wadcutter · Aug 16, 2025

Always great to find a good one that's local. If original, it will have a leather piston seal.

joelayfield · Aug 16, 2025

i have thoughts about that , if you take all the money out of selling hard to find parts " soon they wont be a complaint about price but a complaint that no one sells them any more ! parts will dry up if you dont allow them to make a buck , shipping is work as well as a expense . last time someone wanted to trim everything out of my job i thought about what it took to do the work and what i would make and decided i had other things to do

lwm211 · Aug 16, 2025

$$ SOLD $$
Decided to part with my safe Queen, has not seen any use since acquiring my Huben's.
HW 44 Pistol/Carbine is like new .177 caliber. The air cylinder has been replaced with a NEW rat works aluminum carbine length HW110/100 that gives a shot increase of 40%, and is lighter in weight than the smaller original tube. The butt stock set up includes a Mission First Battlelink Minimalist commercial stock six adjustable positions and tube. Length of pull max 14 1/2" Overall length less moderator 22 1/2" -25 1/2" Remove one screw and stock slides off. Includes owners manual, illustrated parts breakdown, HW Moderator, 2 magazines, fill probe.
SCOPE/RINGS BIPOD NOT INCLUDED
$785.00 SHIPPED

woogie_man · Aug 16, 2025

I may do that here on Monday. I know shipping is typically a pain... but dayum!

Bigbaby · Aug 16, 2025

It probably wasn’t leaking at the gauge, most likely the 3 (yes 3) O-rings on the pin that goes between the blocks #80 on diagram. You can order replacement gauges from Pyramyd Air.

Brianburgess11 · Aug 16, 2025

Kgphotos said:
I've been doing a little research regarding target rifles. I haven't ever competed and don't have any immediate plans but hopefully down the road I may give Silhouette and Field Target a try. So for now a target rifle will just be for my enjoyment shooting silhouettes and other various targets. One rifle that really has my attention is the Walther LG400 FT. I have a couple questions for those that own or have shot this rifle. Since the FT version doesn't come with sights I was wondering if it was possible to add aperture sights in the future. Can the parts be ordered from Walther to add those type of sights so that I can also use the rifle for ten meter style shooting? Along that same thought, I know that the LG400 has an adjustable hammer spring. How far can you reduce the power using just the hammer spring and NOT touching the regulator? Can you get the fpe down into the ten meter target range? Thanks for any help that you can send my way.
Kenny

Did you ever get that lg400? I ordered one but it showed up with a broken stock and butt plate so I’m waiting for them to ship me another one so I haven’t got to try it out yet, super anxious waiting for the other one to come. Just want to know how it went.

Avator · Aug 16, 2025

Bigbaby said:
I fill from my tank so no breaks from the heat to refill my AR, the tank usually lasts a week then gets topped off inside. Even inside, I run the compressed air through a couple of moisture absorption filters to ensure no moisture makes it into the tank and then my AR. If I stopped shooting to refill my AR with the compressor, I’d probably get distracted and end up taking another nap.

I looked you up... you're quite a ways down there. I'm up here just south of Montgomery.

cjtamu · Aug 16, 2025

beerthief said:
love the rounded pistol grip on these old ones , wonderful find worth twice the distance .
(isn't 33 miles considered close in TX. miles ?)

Kim drives 55 to work one way and when I go to the office mine is 70 one way. So 33 to pick this up was a no brainer. Cleaned up nicely, barrel is only thing that could use re-bluing. Two things were obvious after a closer look. Someone loved this gun and used it, this was no safe queen. Two, they took excellent care of it.

Crow, we and a whole lot of other people now feel the same about B&D Air. At best they’re a 2nd tier international airline now. Won’t get any more of our bidness.

Latest activity

Latest activity

Taipan Taipan Slash

RTI The Mora does it again.

PCP Pistol SOLD $ SOLD $$$ HW 44 Pistol .177 caliber $$$

​

Filter