BordertownDevil said:

Tell me about your scope mount set up, pretty please!

Click to expand...

One Piece Scope Mount for Sheridan F and C, Blue & Silver Streak - Baker Airguns

Save $2.98 on scope rings ($21.97 reg price) when added to the order. High profile rings recommended for bolt handle clearance. Rifle not included

www.bakerairguns.com

Hobbyman2007 said:

If weight is an issue , I’d suggest the aluminum tubes available on eBay. They ship from the UK but are drastically lighter than the factory units. They also sell complete but I find the ends to be of lesser quality. Should mention they do have a few lengths available also , you’ll just have to take a few measurements . I went with the FAC 390 mm lots of shots in either .177 or .22

Click to expand...

Struckat said:

What size top hat are you using?

Click to expand...

Ranchibi said:

Johnny, congratulations! Weihrauch makes overbuilt tough, accurate PCP's! Pics when you get it please!

Click to expand...

Kgphotos said:

I've been doing a little research regarding target rifles. I haven't ever competed and don't have any immediate plans but hopefully down the road I may give Silhouette and Field Target a try. So for now a target rifle will just be for my enjoyment shooting silhouettes and other various targets. One rifle that really has my attention is the Walther LG400 FT. I have a couple questions for those that own or have shot this rifle. Since the FT version doesn't come with sights I was wondering if it was possible to add aperture sights in the future. Can the parts be ordered from Walther to add those type of sights so that I can also use the rifle for ten meter style shooting? Along that same thought, I know that the LG400 has an adjustable hammer spring. How far can you reduce the power using just the hammer spring and NOT touching the regulator? Can you get the fpe down into the ten meter target range? Thanks for any help that you can send my way.
Kenny

Click to expand...

Bigbaby said:

I fill from my tank so no breaks from the heat to refill my AR, the tank usually lasts a week then gets topped off inside. Even inside, I run the compressed air through a couple of moisture absorption filters to ensure no moisture makes it into the tank and then my AR. If I stopped shooting to refill my AR with the compressor, I’d probably get distracted and end up taking another nap.

Click to expand...

beerthief said:

love the rounded pistol grip on these old ones , wonderful find worth twice the distance .
(isn't 33 miles considered close in TX. miles ?)

Click to expand...

beerthief said:

95 desrees /62% humidity , not to bad . did some shooting with the BSA break barrel .177 Tenex 4.51 8.2 gr , i should take this hunting squirrels . Very light weight gun and accurate 20 or 30 yards Irons sighted in @ 25 yards. If i sighted it in probably could do 40 yds . easily .View attachment 586632View attachment 586633 if i sighted in @ 40 . ( see the lake way down below this is my back yard range )

Click to expand...

JoeWillie said:

Also try Maple products in Canada , Carm didn’t make right hand loading mags for my HMX .

Click to expand...

Hateful McNasty said:

I listened to it all. Never know when its a jeopardy category or swinging a deal ...

Waylon, led, doors, and the great florida boys ( not the gospel singers ) Lynyrd Skynyrd . I guess i got favorite from kid to today's . Also theres alot i just cant stomach too. Lol

Click to expand...

Avator said:

Looks great.
I was able to shoot a good bit today. I would shoot awhile then duck into the shop or the house to cool off then go back out and shoot some more. I run the compressors in the a/c in the shop so filling guns also gives me a break from the heat. A least the temps are dropping some. We may be over the hump.

Click to expand...

woogie_man said:

Ok guys.... here is one for you.

I have been adding more Theobens to the safe and I am wanting to add more spares to make sure I can keep things running. I took a look over at the RAW site and found the spares that I am wanting......BUT....... the shipping rates are NUTS! For 10 little bits and bobs,

Barrel location screw for Rapids × 2
Bottle "O" rings (pack of 5) × 1
Bolt Circlip × 5
Authentic RAW Rapid Air Worx PVC Patch × 1
RAW Pressure Guage × 1

and the shipping is around $30!! These are all little parts that should be able to fit into a padded envelope!

Is there another source for reliable parts that are not going to cost half the amount of the of the parts for shipping?

Click to expand...

BriarpatchMtn said:

A few minutes with a utility knife. Junk into a target stand. Leave out in the weather no problem. Shot it and break it, easily replaced with another piece of junk.

View attachment 586415

View attachment 586416

View attachment 586417

View attachment 586418

View attachment 586419

Click to expand...