Latest activity

CoyoteGod · Tuesday at 8:07 PM

RickH said:
Welcome to AGN and airgun shooting. I got ack into airguns a few years ago getting some old Crosmans repaired. Now I’m up to 17 and shooting competitively with some excellent shooters. It’s addictive, enjoy.

Rick H.

17? WOW. That’s pretty awesome. I thought I was high rolling with 7. I am super jelly (as the kids say).

borne2fly · Tuesday at 8:07 PM

Rattlesnake season is back. Time to ready my favorite snake gun … the KWC M712. Semi-auto to scare ‘em off, full auto if they decide to fight back

.
Having recently acquired a real Mauser C96, I’m now able to do a proper comparison and I must say KWC did a pretty good job. Even the real grips will fit (with minor trimming) if they are from an early C96. The step in the barrel was really there on later models, so it’s not just a manufacturing artifact of KWC. With some touch up, and adding the stampings found on an original, this BB gun would look frighteningly real.

ChickenDumpling · Tuesday at 8:01 PM

This listing has been renewed

Ta-Ta Toothie · Tuesday at 8:00 PM

For me it wasn't about saving air at all, but just the ease of filling my guns.

Gerry52 · Tuesday at 7:56 PM

NEVER fill guns or tanks without moisture filtration, never. Don't know how comfortable you are with tearing the gun down but it's pretty imperative to find out if water DID get in your gun. If so, that moisture left unattended will RUIN your gun. I'd hate to see that happen to you.

Scotty1 · Tuesday at 7:55 PM

Ta-Ta Toothie said:
That's a poor excuse. The EaZy Fill has no business being a component of high pressure if it cant handle the stress. Could you imagine draining your guns and tanks every few days to keep them from failing

For what they charge for this, it should be built with something other then butter for internals.

The 30 day warranty speaks volumes, doesn't inspire much confidence. How many cc’s of air could possibly be lost with a reasonable length micro-bore line? It can’t be a lot…

CoyoteGod · Tuesday at 7:54 PM

Curious when you were having the change in POI and grouping before noticing the dry fire water vapor did you happen to check your FPS? It would make sense to me that water being a substance would obstruct the free flow of compressed air through the system to the projectile out the barrel causing the issue. So I would say yes, your question would make sense in a hypothetical level.

JimD · Tuesday at 7:54 PM

Without snap ring pliers you cannot get to the belleville washer area of the regulators I have worked on but you should be able to replace the O-rings on the piece that you screw in and out to adjust the regulator. On my Huma and SPA regulators the O-rings are the same size on that stem and on the stem that holds the belleville washers. So you could see if you have some and, if not, order them.

The new Huma in my Caiman stopped working right after I got it. It had been assembled with blobs of silicone grease on the belleville washers and none on the O-ring for the adjustment stem. Cleaning the belleville washers and putting a little silicone grease on the O-ring on the adjustment stem was all it needed. It still works fine. But on a regulator that has a few years on it I think it's a good idea to replace all the smaller O-rings. The ones holding and sealing it to the airtube have held up fine in mine so far.

Ievgen721 · Tuesday at 7:52 PM

marflow 777 said:
the parts diagram at JG air guns doesn't show that piece to be threaded even though it looks that way
oh, i can see the damage but the set screw is holding it together with it set in the dimple
would i put something on the set screw hell yes
would i try to shim the stem with something maybe but you are looking at maybe 8-15 thousands just guessing
JG has a complete piston for sale

View attachment 571292

Thankyou! Yes, there is a whole piston for sale at a price of $41, the piston cap costs 9.95.

gizmo1974 · Tuesday at 7:52 PM

gun has had about 2 mags shot througe it tack driver shoots 25 gain pellet at like 907 fps come with fill probe and 1 fx mag i am first owner got it from u tah air when they came out super nice rifle and shoots really good this rifle came wit larger pendum from factory

nomojo65 · Tuesday at 7:48 PM

I think a stock off the shelf gun can win or will be in the top 5 in any of the 3-4 major competitions this year, of course you will have to feed it pellets the barrel likes and tune it accordingly

. I mean the conditions at the time of day on your relay or table placement will play a huge factor in your standings!.
Pellets, conditions, consistency is such a crucial factor in winning, but I truly feel a stock factory “well” tuned rifle is capable of winning! You better have some hours behind that gun if you’re serious

.
I don’t…

Hondajunkie01 · Tuesday at 7:43 PM

This is your opportunity to own a fully modded, and by fully modded, I mean no stone unturned! I honestly don't think you can buy any other upgrades for this beast. I started this project before buying my krait and now have no need for 2 guns in a similar caliber. The gun is currently tuned for 21gr hybrid slugs and shoots them at 850fps; it can do this for over 150 shoots.

1000$ + Shipping w/scope (1600$ into it)
900$ + Shipping w/o scope (1400$ into it)

It will include the following Parts / Upgrades.

All ports upped to 4.5mm
Tuxing 360cc Bottle
C88 380mm Fx liner system
380mm STX Superior Liner
Buckrail Chassis
Huben Dream Regulator
CRC Precision Plenum
Aluminum Lever
Full Trigger Kit
Hammer weight
Upgraded Poppet valve
Huma-air MOD30-3\0 Mod
Ergo Suregrip
Hajimoto bottle clamp
Hajimoto Mag and Stock mag
Spike Industries Folding Brace
PP750 Stock Grip with Airgun Archery Fun G10 Grips
UTG BugBuster Scope

Will include 200 fx hybrid pellets

Shooting Targets · Tuesday at 7:42 PM

This listing has been renewed

Shooting Targets · Tuesday at 7:41 PM

This listing has been renewed

Shooting Targets · Tuesday at 7:41 PM

This listing has been renewed

Shooting Targets · Tuesday at 7:41 PM

This listing has been renewed

Florida_Man · Tuesday at 7:40 PM

ThomasT said:
Hello everyone,

A beautiful 71 degree blue sky day but just a tad bit too much wind for me to shoot the pistol/carbine at 10-meters so I sat up indoors. Shot several almost identical cards but this one I was able to keep the POI all in the black.

Range: Indoors at 15-feet
Pistol: .22Cal Custom PP-800 R Pistol/Carbine w/full Buck Rail AR Conversion
Scope: UTG Bug Buster 3-9x32
Pellets: AA Accuracy Plus 13.43gr
FPS: 429
FPE: 5.5
Position: Bench w/ TPR Front and rear Bag

ThomasT
View attachment 545808

This was the last target Thomas posted. I just read today that he had passed. He will be missed. He nailed this this one!

RickH · Tuesday at 7:40 PM

I have both types and my first pcp was a Benjamin Maximus. Not fast or fancy but accurate, lightweight and I can pump up to full pressure easily with a hand pump. It lives in my truck most of the time.

Rick H.

Ta-Ta Toothie · Tuesday at 7:38 PM

Contact GX. I currently have 12 hours on my 5K1, so that's 36 top offs on a 97 cf bottle. No issues so far. Also have a CS4 with 50 hours on the clock. These things do get banged around pretty good during transit, so something is probably lose.

marflow 777 · Tuesday at 7:37 PM

the parts diagram at JG air guns doesn't show that piece to be threaded even though it looks that way
oh, i can see the damage but the set screw is holding it together with it set in the dimple
would i put something on the set screw hell yes
would i try to shim the stem with something maybe but you are looking at maybe 8-15 thousands just guessing
JG has a complete piston for sale
had to go to Waffencenter Gotha to see what this looks like, i needed to educate myself
https://www.waffencenter-gotha.de/s...HAENEL-311-Untergruppe-3-112-311-2::5231.html

CoyoteGod · Tuesday at 7:37 PM

As thomasair said, your scope must be perfectly Level or as you move out in distance you will move on your MOA clock dial left or right instead of up and down with your elevation turret. Not something to dismiss. Before looking at Airgun as problem look at set up first. could save you lots of money and frustration. it’s a foundation of accuracy.

dlb-vbc · Tuesday at 7:32 PM

This listing has been renewed

rdpjr6504 · Tuesday at 7:30 PM

Picked these up on forum used. Pretty sure the seller stated they were REDCORN.

SNEYDER FX . · Tuesday at 7:28 PM

thomasair said:
If your scope was properly aligned to the barrel...it wouldn't do that.

Thanks friend, I will carry out this suggestion you just gave me.

Scotty1 · Tuesday at 7:27 PM

I believe the Prophet 1 hammer will work, but Rok will respond and have the answer. I had a Priest2 with the upgraded side lever block, but can’t recall which hammer profile it was. It may have been this one above, just to further muddy the water…

Latest activity

Latest activity

PCP Rifle SOLD fx drs classic 25 cal 500mm same as new 900$ shiped

PCP Rifle WTS FULLY modded Notos 22

Filter