Latest activity

igolfat8 · Wednesday at 7:26 PM

Ricochet said:
50y, 22 cal pellet

View attachment 586040

Great target at 50Y Ben.

JaceSpace1369 · Wednesday at 7:26 PM

hussn32 said:
Not sure , I thought 5 magazines on 50 bar of air was good.

My bad!

BumperMan said:
This is a very good result. JaceSpace1369 may not have read exactly that it is about consumption only 50bar for 5 magazines. Such consumption is a dream for me so far.

You are correct I did not

. Glad you got it fixed!

Pellets&Pistons-(Razor62) · Wednesday at 7:20 PM

KWK said:
Nice Kevin.

I sanded in two coats of oil finish over the last two evenings. Pores pretty well filled.
Needs a few more coats. Then redo the checkers.

The figure is really showing in that wood now. Beautiful! Nice work. Ill be following this one closely.

woogie_man · Wednesday at 7:19 PM

I need to get a few guys out and shooting to see what we can do up here. Though with winter fastly moving in, we need to move quick!

woogie_man · Wednesday at 7:17 PM

Waiting patiently to see if @Corbin will release the die set for these slugs....... so I can make my own and see what happen.

Curious to see what you guys think of them.

Steve Milbocker · Wednesday at 7:16 PM

Thank you guys for helping keep Thomas’s thread alive. Some amazing shooting. I’m definitely impressed.

Ricochet · Wednesday at 7:15 PM

50y, 22 cal pellet

woogie_man · Wednesday at 7:15 PM

I loved the RedWolf when I had it.... still regret selling that rifle.

But currently I would have to say the HM1000x in the MPA Chassis. The added weight make the shot cycle just about dead and the rifle is as smooth as a babys bottom.

cavedweller · Wednesday at 7:06 PM

duchunter007 said:
Having never owned a Red Wolf yet, I would have to say my Ghost is very smooth and very enjoyable to shoot, with a close second to my XR Sniper!

Having owned both you referenced - they are very close to the RW but more clunky in the cocking cycle

mayder · Wednesday at 7:03 PM

Tienes algún enlace de descargar gratis de algún buen silenciador para el zelos?

mayder · Wednesday at 7:02 PM

Squirrel hunter said:
Probé varios deflectores diferentes. Todos reducían el sonido por igual. Opté por el deflector más extraño y fácil de imprimir. Creo que se debe a lo pequeño que es el espacio en la cubierta.

Jack.K · Wednesday at 7:02 PM

This listing has been renewed

Rolland · Wednesday at 6:54 PM

I just finished my older model 880, found all the parts on ebay, [email protected] He has the kits for both the older model and newer models. It depends on which one you have. The older model has a brass tube sometimes steel and the newer models have an aluminum tube,
hope that helps The two kits are different.
cheers

Cbourbeau32 · Wednesday at 6:53 PM

Hello, I watched a couple of YouTube videos regarding which one these are best and why. What is everyone's opinion on them?

FLgunner · Wednesday at 6:53 PM

I just attached a block with a gauge on it to the end of the fill whip on the output of the filter. The gauge at the end of the whip did not move until the compressor gauge was close to 180BAR (2600 psi), then it let the air flow and I could see it quickly increase on the whip end gauge until the compressor shut off at 250BAR with the whip gauge showing 3600 psi. So, I guess it's working as it should, but that still seems a really high pressure before it let the air pass and leave the filter!

manabeknives · Wednesday at 6:49 PM

Gerry52 said:
These are what mine look like after rolling around in a tin for a few weeks that gets carried in my pocket or a pouch. (.22 FX Hybrids on left & Daystate Howlers). I wonder why they don't show the same kind of uneven, marred finish.View attachment 585674

Hey Gerry,
I receivedtwo tins of the slugs, and they do not look as rough as in the picture.
They are smooth and uniform…not like tree bark
hopefully, I will get a chance to try them out later
Mike

FLgunner · Wednesday at 6:44 PM

It would make sense that the belleville stack is regulating the output of the filter, but I really don't understand why the output needs to be regulated.

FLgunner · Wednesday at 6:43 PM

Here are some pictures of what I found when I took the top of the filter apart...

This is what you see when you remove the largest nut.

This is the inside of where the smallest nut fits into the largest. The middle sized seems to be acting as a lock nut for the smaller one.

This is the belleville stack that's inside the smaller bolt.

Fenian · Wednesday at 6:42 PM

Hey all

Has anyone got a link, or can they make me a steel (just thick enough to prevent .17 and maybe .25 pellet damage) bird feeder?

It needs to be all metal, squirrels are eating and destroying the bird feeders that are wood. And completely looting the feeders such that I’m spending half a bag a day on these feeders because they just come and pig out all day while the birds get little.

I looked on Amazon and I don’t agree that some are squirrel proof. So I want a feeder that’s all metal and can withstand pellets of .17 and .25
And a platform would be nice

woogie_man · Wednesday at 6:40 PM

Does it need to be one rifle....or one family?

RAW HM1000x in 22 caliber, shooting Corbin 34 grain slugs
Theoben Rapid MKii with a 25, 22 and .177 barrel ( Thanks Scott for the barrel! )
Dawson Rapid in .25
And the newest is aTheoben MFR in 22

I guess my camera was dirty on my phone, and I also need to get my boy to mow the darn lawn!

rdtricks · Wednesday at 6:37 PM

This may help some: https://fxairguns.com/wp-content/uploads/2021/05/Crown.pdf

I really hate it when things fall off of my bench!

FLgunner · Wednesday at 6:37 PM

I stopped it before it hit 150 BAR. Maybe I have never noticed this because I'm typically topping off airguns, so I just never noticed. Today I was filling an airgun that was empty, so starting out at zero on the gun gauge and started freaking out when the compressor is showing 100 -150 BAR and the gun is still showing zero!

Racing · Wednesday at 6:33 PM

Here the Reximex Meta Premium, in 25cal. This one with the optional carbon fibre bottle. IMO a number of steps up on the ladder vs most anything else out of Turkey at the moment, however NOT sans flaws or issues.

But. For the sake of argument. Someone sat down and questioned hammer bounce and came up with this. It´s just a piece of sheet metal and a few screws incl "escutcheons".
Some thinking went into it, it´s cheap to produce. THAT`S what i´m getting at.
The Meta Premium though needs porting to be able to hand the goods, but that done my two MP´s shoot at the same muzzle levels my SL does.

Lexingjim · Wednesday at 6:26 PM

Just tried the NSA .2175 17.5gr slugs… today they fired at ~805 fps and got a decent group at ~65 yards

Lexingjim · Wednesday at 6:23 PM

My Stoeger Bullshark seems to like the NSA .2175 17.5 gr closed back slug… ~800 fps at -65 yards.

Latest activity

Latest activity

Filter