Latest activity

lonedave · Jul 31, 2025

I don’t have a Texan, so I can’t help, but one of the people who has been in the Airgun slug manufacturing business the longest would be Robert Vogel, aka, Mr Hollowpoint. He has also probably tested more Airguns over the last couple decades than anyone and I know he has tested Texans. He would be a good person to give you advice on which of his slugs would work for you. https://www.mrhollowpoint.com/index.html

BC · Jul 31, 2025

Does anyone have either the 3d printed multi caliber single shot M3 loader, OR separate 177 and 22 caliber single shot loaders( 3d printed or aluminum or steel) that they want to sell. Tell me what you have if you're looking to get rid of them.....new or used work....

Thanks alot....Bill C......7zero2 six88 zero1wo1....call or text....

BC · Jul 31, 2025

Does anyone have a FX Impact M3 500mm 177 cal barrel kit complete with moderator attached and with probe for sale (besides new at a retailer, haha ). STX Superior, as I am going to be shooting pellets mostly.

thanks alot.....Bill C.....BC. 70two 688Zero1Two1....texting or call preferred.......

Ratzy · Jul 31, 2025

garyinky said:
I found firewalker on here but don't know if I can pm him yet until my post count gets up. I

@Firewalker can be contacted by PM, you have 16 messages. Only need 10.

Georgii Arapov · Jul 31, 2025

delooper said:
I have no problems with the stock trigger.

Same here, what am I missing

lonedave · Jul 31, 2025

Ezana4CE said:
ill have to sit this one out. The site appears to be down to scraps and I’d just be ordering random molds.

It can definitely be a spendy rabbit hole!

Georgii Arapov · Jul 31, 2025

Basher said:
Yes, the classifieds here are fairly active. As noted above though, you have to be a member for more than 10 days and need to be an active participant. They set those requirements to help weed out scammers and people who want to just dump their stuff and disappear without any accountability if it’s damaged or not as advertised.

Good to know as I am planning to sell Leshiy 9mm soon.

airgunmike56 · Jul 31, 2025

I like that feeder simple, cheap and easy,,
Mike

sonnysan · Jul 31, 2025

This listing has been renewed

WorriedMan · Jul 31, 2025

garyinky said:
Considering a Zelos as my first PCP but I don't like the aesthetics and would like more shots anyway. Couple of questions.

1) I know several people do or have made bottle conversions but what's the current best option in terms of quality and cost ? Should I get the adapter from a reputable source then get an e-bay bottle ? Thinking CF bottle instead of aluminum for weight reasons.

2) I'm thing a smaller bottle, 400cc maybe less. What can I expect in terms of weight gain ? I'm after high shot count and low weight. I'm thinking that a bottle option, even a smaller one, might allow enough air to move up to .25 cal.

3) Should I just buy a bottled gun instead ? I see the Snowpeak M60B is exactly what I'm trying to do but AAF's site notes 55% price increase due to tarrifs. Am I reading that right ? I really like what the FX Dreamlite bottle offers but it's significantly more expensive and getting hard to find for some reason.

Sorry for re-hashing Zelos stuff that is in other threads - I've read most of them - but most seem to deal with very large bottles which is not what I'm after. I know much of this is subjective but I'm open to opinions from you experienced folks.

Thanks.

At least, Wes, of airgunarcheryfun, warns of tariffs from China and Canada being combined, less scrupulous stay silent and allow US customers to suffer the shock of a lifetime. WM

Chuck-in-Ohio · Jul 31, 2025

crowski said:
Thanks, it is a jr. That’s what was advertized. I would have thought it would say jr on the rifle. I also got a FWB 601 from this guy. The two rifles have simalaries. Crow

The only thing that distinguishes the Jr. model from the standard model is the length. The shorter length is accomplished with a shorter shroud and a shorter length of pull on the stock. There will be no marking to distinguish the two models.

airgunmike56 · Jul 31, 2025

Anyone notice that muffler I have on the GKl shorty,, short and does the job. (Thanks Mike)
Anyone have any luck with the plastic holsters , A friend of a friend just got rattle snake bit while mowing , Reached down to pick up trash mower running , Snake got him on the upper thumb,,,, I am on full alert now ,
Mike

mrwindows · Jul 31, 2025

The compression tube has squished itself into a pancake style burr. Of course this has also damaged the oring. There does not seem to be any damage on the barrel side, except some light marring of the finish.

Should I locate a replacement compression tube or take the part out and file it down?

1 oring was removed to take this picture and the gun has under 1,000 pellets.

Texas Iggie · Jul 31, 2025

Nice looking rifle.

fishing43 · Jul 31, 2025

22&25 compact vet 1’s ready for squirrel season . Opens tomorrow

airgunmike56 · Jul 31, 2025

mountainguardian said:
I have an order from October 2023 that Kraford and Lypt never fulfilled. They have continually ignored my emails and voicemails. I had too much faith in them and now out $646 as far as I’m concerned.

646, bucks wow, what did you order, Hope you don't have to send it back, It would be 161.dollars restocking fee and shipping is on you , 200, bucks easy
total,,,, Good luck.
Mike

Scotty1 · Jul 31, 2025

More cowbell!

scubajeeper · Jul 31, 2025

Here’s mine.

scubajeeper · Jul 31, 2025

igolfat8 said:
I’d buy a Compact 2 but seems they have no interest in building one.

I sold my Compact 1 and have kicked my butt since. Anyone got one in .22 for sale????

I bought it for a friend of mine, it now lives in Texas. It is a really sweet gun, I can’t believe you sold it.

TerryE1 · Jul 31, 2025

This listing has been renewed

Cantona256 · Jul 31, 2025

RoosterCogburn said:
40gr take aim .25 at 815. Heard something messing with my gutter. And of course. Nibbling the same spot several others have. Any pest exclusion people know if this can indicate something. Airflow or some type of scent ?

View attachment 582578 View attachment 582577

Haha rearranged his face… lot of people pay good money for that service!

rexydg7 · Jul 31, 2025

Trucker3573 said:
Interesting seeing they are being charged all over the board.

They are not in effect yet.. some "sellers" have just taken the opportunity to make more money because most TV watchers have no clue that is the case. They raise their prices, blame "tariffs".. profit! because the teevee told their "customers" it was a thing.

rexydg7 · Jul 31, 2025

OldVet said:
An airgun , or ,pcp.?

pcp

Franklink · Jul 31, 2025

@Solo1, I did try some of the 13.4s in this experiment.

There were 8 barrels involved. I tried the 13.4s from 4 of them. Pretty poor accuracy from all four. Not even good enough to get to worrying about what kind of wind drift they've got. These were the RD 13.4s though, and I believe most of the ft crowd that prefers that weight uses the originals. The original 13.4s gotta shoot a heck of a lot better than these RDs I was experimenting with, cuz these were absolute crap.

Kenjeepman · Jul 31, 2025

So i noticed the latest closing valve is tapered on the bottom. I did install it and dry shot once and then it dumped on the next shot. I am wondering now installing it without the washer ??

Latest activity

Latest activity

PCP Rifle FOUND FX Impact M3, 177 and 22 cal single shot loader needed

PCP Rifle FOUND FX IMPACT M3 177, 500mm Barrel kit needed , with Probe

Question Air Arms TX200 Breech Tube crushed

Filter

Question

Air Arms TX200 Breech Tube crushed