I have the 109.00 tuxing fiber glass bottle off Amazon on mine. Also have the hueban cricket bottle adapter with the regulator so I can fill to 300 bar. Greatly increases the shot count. The Huben cricket bottle adapter was purchased from hajimoto productions after the tariffs . The other I purchased directly from hueban before the tariff. One for my 22 and the other for my 35 zelos

This listing has been renewed

RoosterCogburn said:

40gr take aim .25 at 815. Heard something messing with my gutter. And of course. Nibbling the same spot several others have. Any pest exclusion people know if this can indicate something. Airflow or some type of scent ?


View attachment 582578View attachment 582577

Click to expand...

Squirrels will mark their territory by gnawing rubbing their cheeks or urine. They may be trying to take over others territory or if you take one out, the other one moves in.

Thumb in Michigan

Valve pins for the .30 and less 24" available at The Pellet Shop. .35 you're out of luck.

lonedave said:

Yeah, I'd like to see about ordering another valve pin and some o-rings just to have them for the future. I haven't found anyone with the pins in stock, but I should call and see if they can order any. Fox Air Power has o-ring seal kits (for a pretty high price), but I guess it might make sense to just bite the bullet and order a set. It would be nice to have a better diagram of the guns with all the parts called out and seal sizes listed.

Click to expand...

Which is why I have various assortment kits of orings. I have a lot of guns using different orings so I try to cover the gamut. Occasionally I encounter an oddball and have to pay a premium.

Pull the oring, measure with calipers, replace the oring.

Hardness can be an issue, duro 90 is a bit less available and not in kits. Mostly duro 70 or 75 in the kits.

The C88 Machining adapter is well received. it comes with shims to get clocked.

Zelos is regulated so if you stick to the max 3650psi no additional parts required.

If you want to use 4500psi in the bottle then you need a Zelos regulator from Huben Power and you do not need the above adapter.

Well, I had to go order another mold from Al. I need a little heavier .357 for a new-to-me Extreme Big Bore that'll be here on Monday. My wife is going to shoot me with it when she see's the credit card charges for the month!! Oh well, I guess we all have to go sometime.... .

Raleigh, NC

Search eBay for Theoben piston crown. NOT seal! That's another goofy thing Theoben did, name their seals "piston crowns". You will find the wrong one................but.....
Message the seller and ask if or when the Zephyr seals, Oops! I mean Zephyr CROWNS are available again. You might have missed the boat. Seems like they only cast these things on occasion. Yeah, they're cast.
He will ship from UK. NP
Mk1and 2 Eliminators use the Zephyr
Stock up like I did

ninersix said:

S0rry I have been busy Cybersecurity issues.
Anyway adding wight to the to the bolt... I have no idea how to do that e.g. to what part of the bolt? Are you referring the the small black tube? Please refer to the exploded diagram as to where the "weight" would/should be added. Where would this weight be added specifically.
I am confused and I do not wish to make any permanent changes to the gun. From the beginning with the wood furniture and any modification I have always maintained that the M1A1 would be able to return to it's factory condition with any modification.
Perhaps that is not possible.

Click to expand...

From the diagram it looks like 2-02 is your bolt. Please check me on that. That’s what rattles back & forth on full auto (actually, semiauto as well). On the real gun this would be steel and much heavier. And slower. This is where you would add as much lead as you can, any way that you can. Of course it needs to be secure or it’ll shake loose. I’m guessing the Co2 gas port (likely a black plastic thing) is contained in the bolt so you need to see how much space is left over to pack in some weight. As an initial experiment I might pack in some plasticine (since it’s easily removable) and see if it makes any noticeable difference.

This listing has been renewed

DonEnzone said:

Turns out my local gunsmith didn't install the barrel on my GK1 properly. It's not screwed in far enough, leaving too much space between the barrel and the magazine.

Does anyone know if it's difficult to install and align the barrel on the GK1 yourself? Do I need advanced tools for the alignment?

Click to expand...

Only difficult to align if you take out the 2 screws that align barrel to magazine. Otherwise loosen nut, tighten barrel, backoff 1/8, tighten nut without miving barrel, confirm magazine free rotation.

Ratzy said:

AEA is weird like that. It is like they only have a finite bandwidth for products. Once they start working on a new product some current product just dies without any notice.

Click to expand...

Yeah, I'd like to see about ordering another valve pin and some o-rings just to have them for the future. I haven't found anyone with the pins in stock, but I should call and see if they can order any. Fox Air Power has o-ring seal kits (for a pretty high price), but I guess it might make sense to just bite the bullet and order a set. It would be nice to have a better diagram of the guns with all the parts called out and seal sizes listed.

Awesome info. Just to be clear, I just need the adapter and a bottle ? No special valve needed ? And do all adapters clock correctly ? Concerned about it fitting square to the gun.

Punta Gorda, Florida….land of endless summer. John

Geomica said:

Are those H&N pellets you're shooting, the 18.52 gr. hollowpoint?

Click to expand...

The barracuda extremes yes

FYI…old saw blades make great scrapers…they don’t have to be pretty. Cut up an old blade with an angle grinder, drill a hole in the center, run a piece of all thread in there. Chuck it in a drill motor, hold it up to a belt sander until it’s approximately the diameter you’re looking for. A nut between the discs increase cutting efficiency. .040 should be a short amount of time. Good luck. John

JaceSpace1369 said:

CF bottles off of Amazon are $95-$130 depending on size of bottle.

Click to expand...

Tuxing 0.36l was about $80 last year. $109 now and if the additional threatened tariffs are implemented no telling how much they will cost.

Best bargain is the 0.5L which is only $109 right now.

Only *bargains* on AliExpress ship from US stock. 1.1L Acecare for $101. But Tuxing/Alsafe/Acecare dont stock gun size bottles in the US. At some point they will run out of pre-tariff stocks of the larger tanks too.

This listing has been renewed

This listing has been renewed

Welcome aboard!

Can you be more specific or descriptive?