Frank in Fairfield said:

Like I suggested.
Mount a picatinny mount on the side (s) and clamps the legs into it.
Don’t do it.

Click to expand...

I agree. Springers don't usually do well hard rested.

I tip from years back from our fellow British airgunners, remember they are limited in their power output,put the pellet in backwards for short range hunting....

Match Video

You do not see very many of the LG 210s come on the market over here. You will see them infrequently on Egun even, if that tells you anything about scarcity.

It is the last SSP 10 meter rifle that Walther manufactured, and was Walthers answer to the FWB 603, Anschutz 2002 Superair, and Steyr LG 10.

there are many waxes just as good,a tip,look at the ingredients ,then try to match them,when looking at other waxes,ps this also works for most other things

L.Leon said:

Good shooting @rut, love the opening scene, all those beady eyes shining… Inviting a pellet…

Click to expand...

First thing I saw right when I got there.

My Marauder field target is accurate and quiet,you can get it ,a good scope and a compressor for about $1000 .I shot springers for decades before getting a PCP,since you have experience in shooting, there is nothing wrong going that route, an HW30 or R-7 are the way to go .Check them out
I do not think it is a good idea to spent too much money when starting out unless you have the money to do so,I say this because you may be just as happy spending less $$$$

That is disappointing I have been using that for years as a release agent when bedding rifles guess I will have to be careful using what remains in the can. I wish they would leave well enough alone.

JohnTaylor said:

Flies are one of my favorite targets…..many on here share our sentiments. The supply never seems to diminish! Thanks for reminding me to do my part to keep them in check. John
PS I see you are in the Tampa area….if you have any interest in Fieldtarget…we have a club in Arcadia, and one in Nokomis. Let me know if you’re interested and I’ll get you any info you need. John

Click to expand...

I have been to the Arcadia range. That is if it is still on I think it was 70 near the Peace River Campground.

While I thank you for the offer both places are a little too far for me. I say Tampa Bay area but really I am in Tarpon Springs. Maybe 120 miles from the Arcadia range.

Here is the best way to find the answer: go to their website, and you will find the hierarchy of their scopes,this works for most scope makers.The Venom is in the middle.

This listing has been renewed

AGM Rattler V2 in 19-256 can be had for less than $700 new. AGM app uses a hotspot WiFi on the scope to connect your phone and not need to be behind the scope. Different settings for brightness, contrast, palette etc. Go up if you need more resolution at zoom, but at 2.5x and at the price point, I am more than happy with the features. 12 ųm thermal sensor.

The hammer pre load is either quite low or there is blockage in the airway

Out bustin cans and shootin steel with the .30 and 25

Also said he is getting a Pinty Pup & will have mags for them. The man knows no limits!

very nice setup
Ultra Dot sights are very good, i have a couple laying around

I received the rifle yesterday and I’m more than pleased with this rifle. I’ve had my fair share of springers and gas rams. The trigger is not as good as a record but I’m sure I can get it closer to my liking, currently has a pretty long first stage and quite a bit of creep in the second . The pull weight seems ok.
I’ve been trying to find some info on this rifle other than some of the history the seller gave me.
It is stamped as a Beeman arms inc. Santa Rosa California and serial number TB6959 It must be pre 1994 which should make it either an MKI or MKII from the very little info I could find.

The stock is in really good condition and just needed a good cleaning and a few coats of Tru oil. One minor issue with the sling stud being off center. I’m going to remedy this by filling the hole with some wood glue , countersinking the offset divot and making a steel spacer to get it centered up. I’d also like to find out about what trigger this is. I’ve seen pics of the evolution and this doesn’t look like one of those. If anyone knows when this rifle was made using the serial number and what trigger have. It would be greatly appreciated.

very nice and it was shipped from where to Canada
these have to be very rare rifle

FYI, if you're having issues syncing data from the hardware to your phone, make sure the hardware has the latest firmware version. That fixed my issue. I'm using an Android phone but I'm not sure that matters.

if i'm sighting in or checking zero is the only time i shoot paper......
and if them flys get on my paper, there done usually but sometimes not

Much like Motorhead, I've not experienced any issues with any Athlon scopes, even the entry level Argos and I've shot in 40-100 degree weather with it. My Hawke Sidewinders have never given me any reason to question temp shift either.
Two things came to mind while reading this post which is a little off the OP topic but I've seen where rings can be too close to the scope saddle causing the erector tube to distort and not range correctly and overtightening can cause tube distortion as well. Move the rings as far apart as possible and don't overtighten unless you have the recoil of an M82.

I have the p2 performance with the gen 4 valve and it’s been great. RTI’s customer service is top notch. I wouldn’t worry about buying the older gun if you can get a good deal on it. My only complaint with RTI is that I wish the cocking lever could be swapped from side to side. Other than that, they are very simple guns and are easy to work on.

Flies are one of my favorite targets…..many on here share our sentiments. The supply never seems to diminish! Thanks for reminding me to do my part to keep them in check. John
PS I see you are in the Tampa area….if you have any interest in Fieldtarget…we have a club in Arcadia, and one in Nokomis. Let me know if you’re interested and I’ll get you any info you need. John

jps2486 said:

That old Johnson's wax was intended for people to wax their wood floors in the old days. No requriement for that product anymore. For gunstocks, I use Renaissance Wax: $18 for a 65ml can.

Click to expand...

JPW, Johnson's Paste Wax was the go to wax for woodworkers. The woodworkers have been lamenting the demise of JPW for a few years now.