Latest activity

Hobbyman2007 · Jul 26, 2025

Not that an airgun would be my first thing to grab from the cabinet but if I had to . I’d bring the Theoben Rapid MK2 in .25 cal. Very little to go wrong in these rifles. I’d be more worried about the scope than the rifle.

aircare · Jul 26, 2025

This listing has been renewed

thunderxt1 · Jul 26, 2025

I still can't private message someone.. plz help

thunderxt1 · Jul 26, 2025

Please close thread. Thx

Marker · Jul 26, 2025

Steveoo said:
Yes, if the barrel is not stamped .22 on the top, it is not from the Webley factory but one made in Turkey.
These were made to suit the Turkish lower body after the Webley factory closed and not that compatible with the OEM Webley/ Supplied to Beeman/USA model you have there.
Luckily for you, your main body is a true English Webley meaning the barrel housing ears are of the better quality, having 0.1 mm to 0.15mm of clearance on the barrel for good barrel relocation quality.
Not so much the Turkish version with 0.2-0.3mm of clearance.
You also get the longer guide rod.

For other shooters, it's best to get Turkish barrels to match Turkish made pistols and Webley
barrels for English Webleys.

I did not know that …that is good information…thanks for your input…I been wanting for a Hurricane barrel.22 for over a year now …that’s why I put this one on…

Don.Chipmunk-slayer · Jul 26, 2025

I've seen mentioned a few times about airguns and ammo testing/review videos on YouTube, and wanted to add my $0.02.

I do tend to watch a lot of them, especially if they involve Benjamin/Sheridan airguns or pellets that I have an interest in using, or just plain old pesting videos.

Unfortunately, the vast majority of them are 5 or more years old (with many of them 10- 14 years old), or from the UK.

Also, many of them don't really "deep dive" into the aspects of the testing I'm looking for in particular, or use testing media/procedures that - IMO, are a bit far fetched (think metal & thick wood for critter simulation).

All that being said, almost all of the videos have at least ONE nugget of information I find helpful, useful or at least give me a new perspective to explore.

Curious about what everyone thinks.

thunderxt1 · Jul 26, 2025

I was wondering if it works too. Thx

Steveoo · Jul 26, 2025

Yes, if the barrel is not stamped .22 on the top, it is not from the Webley factory but one made in Turkey.
These were made to suit the Turkish lower body after the Webley factory closed and not that compatible with the OEM Webley/ Supplied to Beeman/USA model you have there.
Luckily for you, your main body is a true English Webley meaning the barrel housing ears are of the better quality, having 0.1 mm to 0.15mm of clearance on the barrel for good barrel relocation quality.
Not so much the Turkish version with 0.2-0.3mm of clearance.
You also get the longer guide rod.

For other shooters, it's best to get Turkish barrels to match Turkish made pistols and Webley
barrels for English Webleys.

thunderxt1 · Jul 26, 2025

NVM I just need message

thunderxt1 · Jul 26, 2025

Something light. Bought my gauntlet 2, first PCP ever, awesome gun. Almost 11lb and my first squirrel hunt was like handicap mode

Engg.Ken · Jul 26, 2025

ba49 said:
How did you get a Preslug .217 die, I have been trying for a year now.

GMI engineering makes direct fit dies for press slug.

thunderxt1 · Jul 26, 2025

Why can't I private message someone. My account is 11 days old now, plz help

357cal · Jul 26, 2025

The Archer said:
Oh, I have been around here and there.
Just a quick note, if you’re having any tuning
challenges with your rifle or simply wanna get your extreme spread down into the single digits, here’s a link to my post on how to tune the Texan, I hope you find it informative.

Airforce - How to tune your AirForce Texan for max velocity with very little waisted air.

I frequently see airgunners talking about the confusing subject of tuning the Airforce Texan, so I thought it might be helpful, if I shared my process for "How to tune your AirForce Texan for max velocity with very little waisted air." Please understand that tuning your rifle for velocity is not...

www.airgunnation.com

Thank you for research. If anyone knows how to get the best out of a Texan, your one of the few.

357cal · Jul 26, 2025

rodjava said:
I am inviting any airgunner to shot with me at the Diablo Rod and Gun Club in Concord CA. I normally shoot every Wednesday from 9-12. You can shot from 25 to 200 yards on paper and metal targets.

First go to this website to complete an online waiver and then only pay $15 to shoot at the MPR- multi purpose range.

I'm normally the RSO on Wednesdays as well.

Rod in San Francisco

Why only 200 yards on metal?

parksrw44 · Jul 26, 2025

I bought the hand pump which is the most obnoxious thing in the world to fill this rifle with. My brother uses a scuba tank. Is there something semi affordable and convenient in between these two options

Kenjeepman · Jul 26, 2025

Just got in a replacement AEA compressor.
1st one sht the bed. Awesome its a 110v version and i no longer need the converter box. Also i noticed its a lot quieter and more balanced, doesnt jump around as much.
It also came with a bag of orings and other seals, quite a few of each actually. Anyone know where they go? Cant find any info on them.

ThE PuNiShEr · Jul 26, 2025

rodjava said:
Some recent pics from latest range day with my .30 RP. Note the custom made charging handles in 2 sizes as well as the #2 regulator digital gauge mounted on the left side with a 90 degree adapter. BTW, I only shoot slugs at 200 yards.

View attachment 581047 View attachment 581048 View attachment 581050 View attachment 581051 View attachment 581052 View attachment 581053

Where did you get the benchrest stand and at what price?

Marker · Jul 26, 2025

This Beeman Temperamental Tampon…has cursed me since I did a .22cal conversion..it shot almost 5.5” @ 10 meters high..this barrel was off by minus .020 from the pivot point.. I am pretty sure these barrels are clones…they are not stamped with the caliber size by the front sight…looking for the easy fix’s.. I modified the rear sight..but it wasn’t enough…now POI is @ 2.5” high…getting better..the only thing left was to raise the front sight..again looking for a easy fix…picked up some Carbon Fiber 2 x 2 mil square rod and added to the front…it now shot 1”low @ 10 meters…I just up the evelation and Bullseye

..So the Beeman Tampon is Bloody

Spot On…lol…England Humor

JoePolanco · Jul 26, 2025

greenbeans said:
Here’s the result of (()) stacks all the way with 24 washers and everything polished all the way up to 8000 while had the reg out. Can probably be tightened up a bit more with fiddling but waaaay better than before, can’t tell whether it’s because of the new stack, polish or both though. H&N 34 gr .217, 72ish FPE:

View attachment 578097

Try the AEA 29.5 Center Punch pellets at 975fps.

JoePolanco · Jul 26, 2025

Liontracks said:
Do they come standard with that big bottle?

The Mora comes in several configurations. By default, the Sniper comes with the 1L bottle but it is available with a 700cc bottle by special order as well.

Latest activity

Latest activity

Filter