Latest activity

Stretchearstrong · Jul 22, 2025

My micro adjust goes past 5, about a full hashmark past. Is this an issue? What causes it to happen?

I can't find any videos or posts talking about this happening. Is this something I can fix/stop by loosening the set screw ans adjusting the position of the barrel adjuster/wheel?

The Archer · Jul 22, 2025

crittahitta said:
Can you post the link please

My apologies for taking so long to get this to you… I’ve been off line for a bit.

Airforce - How to tune your AirForce Texan for max velocity with very little waisted air.

I frequently see airgunners talking about the confusing subject of tuning the Airforce Texan, so I thought it might be helpful, if I shared my process for "How to tune your AirForce Texan for max velocity with very little waisted air." Please understand that tuning your rifle for velocity is not...

www.airgunnation.com

d3vnull · Jul 22, 2025

I'm in Waco. If you want to put your hands on a few rifles to get the feel for them I have a few.

Springers:
HW35 and HW50 in 177 open sights
Hw97 in 22 scoped

PCP:
Air Arms 510 in 177 and 22 but no good backstop for them yet so can't fire them. However, can see weight/length of pull.

You are welcome anytime with enough notice to make sure I'm in my chair.

imtrigerhapy · Jul 22, 2025

bubbahotep said:
400 fps with CPHP, 5m away and target is 1 meter above shooting position. Not sure if keyholing or hanging chad because of angle. Stairwell is only place to shoot without windows nearby.

View attachment 580192

Try to match the target angle with the stairs angle and then try. So the pellet flight is as close to straight on

Franklink · Jul 22, 2025

In regards to the adjacently related 2% rule....best to stay under the actual legal limit and not rely on that 2%.

Risky business relying on the 2%. It exists because of chrono variation, and variation is something notoriously seen from different chronos, even the same model.

MACTEN · Jul 22, 2025

Massiemax said:
So far with my 22 550 barrel slash, I’m shooting 27.5 gr .217 NSA slugs at 910ish fps down to just about/above 120ish bar. .218 don’t fit the slug mag and I haven’t tried putting it in the pellet mag. So far the gun has been good with me hitting clay targets at 72 yards with iron sights. Regarding the semi auto function, you can’t just let off and shoot rapidly; you can pull about every second, but shooting faster than that can cause the mag not to cycle. (as far as how my gun is set. Not sure if that’s adjustable)

I believe the the indexing happens only when there is a pellet in from of the valve to allow it to bounce back air?
I know .218 do fit very well in the pellet magazine and depending on what I find, may end up going with them.
Not a bad thing as then I could buy the same .218 ammo for 3 airguns .
I know you have bare sighs but can you even tell if it's grouping at 72?

twalt12 · Jul 22, 2025

That is awsome! I am working with my daughter to shoot a few of my FX rifles. she enjoys it so much more than even supressed 22's

Dstrac · Jul 22, 2025

jgg765 said:
I cannot speak for slugs I haven't put them through mine yet. I've spoken to several people who've shot other semi-automatic air guns. I honestly think the Huben is king it's so reliable easy to use the only downside that doesn't have a removable magazine. If you're ever in Massachusetts and you want to shoot mine we can meet at New England air guns. I went on a recent iguana hunting trip in Florida I was just throwing the iguanas it was great. Most of the guys have shot almost every type of gun and hands down they all said hubin was the best. Additionally, before I bought my air gun I read hundreds of posts and everybody steered me towards the huben and it's been the best thing. I'm going to be ordering some slugs so I could let you know at some point how they work

From Massachusetts as well. Where in Florida did you go iguana hunting? I go to south Florida in the winter and wanted to go iguana hunting this year

wimpanzee · Jul 22, 2025

i haven't shot a leopard. the panthera 700mm is sure a long beast tho

twalt12 · Jul 22, 2025

WOW splitting playing cards at 200 yards is impressive. I am getting reeady to start tuning and testing .30cal slugs on my new Leopard

Don.Chipmunk-slayer · Jul 22, 2025

jarmstrong said:
can I get the squirrils to wear them?

If you're quick enough to put them on a squirrel, why do you need an air rifle?

Franklink · Jul 22, 2025

JW. said:
....The poly barrels are amazing and 20cal has a killer BC.

Too bad the latest LW 20's have been throwing 1" groups at 30 yards.

Yes, and yes.
1:36 slow twist poly with .177/10.34s at 920ish, or .20/13.73s @ 800ish. Both are mui bueno.

One possible option is to repurpose one....the .20 barrel in my USFT was originally in an Air Force Condor. Yes, still LW, but perhaps AF orders them spec'd differently or something. Or perhaps it's just as simple as barrel to barrel variation and I got lucky to find a good one.

cjtamu · Jul 22, 2025

Correct, three frontsight units. The current one by far the best. Hoping to cure without having to pull it off. If I have to remove then I‘ll look at drilling and tapping for set screw like the current version. There’s plenty of room but the metal is soft so I have concerns about it holding up. Advice from Ron and A. G. R. is usually pretty solid.

jarmstrong · Jul 22, 2025

can I get the squirrels to wear them?

twalt12 · Jul 22, 2025

any thoughts on panthera vs leopard in .30 cal? I just ordered the leopard due to the shorter barrel due to the bullpup design. I was thinking hard about the panthera.

Scotty1 · Jul 22, 2025

no.4shot said:
I am unsure what size it was. Went to a shop they said it's this one. So I got it. It matches up to the old one. Wonder if it's the wrong one from the get go. It was the same shop the tank is from.

What brand is the bottle?

EquivalentDelta · Jul 22, 2025

Probably cant related if its shifting from one target to another from the same position.

There are a lot of bubble levels made just for guns, easy to mount and use.

Matt247365 · Jul 22, 2025

Rest in peace, Ozzy.

twalt12 · Jul 22, 2025

Does anyone have experience with this optic?

davecole · Jul 22, 2025

This listing has been renewed

Don.Chipmunk-slayer · Jul 22, 2025

Hateful McNasty said:
Ive used the " dot " stickers till they double in price . A Sharpy is cheap these days ..lol

Example
View attachment 580196

I'd thought about those, but decided on the ones I did, because my grandfather taught me to "imagine a small button on a deer or whatever, and aim for that." That way even if you miss the "button," you still get a solid hit on the target.

This was years before I ever heard the term "Aim Small." And the small 1/4" hole lets me aim 'smaller' than I would aiming for the whole dot.

Xono · Jul 22, 2025

6gun said:
The tensioner block may not jive with the trigger block of the M4 iirc. I have one on my m3. I might suggest the carbon harmonic shroud . They look good but add length and weight, which wasn't for me on a 700mm at the time. The tensioner significantly changes the barrel harmonics tendencies too. If you're not doing high power slugs with an abnoxious shot sequence, I might steer people away from it unless they're suffering barrel whip.

Attached Pic was a remachined carbon shroud over carbon tensioner. The carbon shroud does a great job with noise absorption too. Mines an m3 and I know the tension kit fits that architecture.

View attachment 580168

Love what you have done to your M3. Where can I take a look at this carbon shroud?

scottg0814 · Jul 22, 2025

Mark @ShootingTargets7 just sent an email promoting a flash sale on 1" Superlock Mini Gong targets. Here is a quote from his email...

Mark here with ShootingTargets7

Quick Flash deal for your consideration.

The warehouse crew just found a bunch more superlock mini gongs in the warehouse.

I'm wanting to close that listing out so I am offering these at just one penny each (limit 10) to anyone who's purchased these in the past.

If you have a use for these you can't beat this price. At the time of this mailing there are hundreds left but they won't last long at these prices.

1911Tex · Jul 22, 2025

The way I see the great springers.....they are the true survival rifles.....when all goes to turds, you can't take a PCP.....totally useless; however the good ole Springer will be with you for the journey, anytime, anywhere and at a moments notice! That and a good knife!

Ratzy · Jul 22, 2025

Silent shot said:
Good to know that there is several good experience for those tanks.

My preference just from general chatting with them is Acecare. Always pleasant and more than happy to sell you just 1.

No difference quality wise from Alsafe.

Latest activity

Latest activity

FX .22 FX Impact Micro Adjust

Filter