Tony and I will be there. Looking forward to it and beating the heat we have down here!!

This listing has been renewed

Pretty obvious that uniformity plays a role. I've only shot them out of another person's gun, from 200-286 yards. Absolutely amazing!

I think "Shooter1721" did a piece about it on YouTube.
Here's the link

There are more there too.

Frank in Fairfield said:

I had four of them.
All four had after market stocks.
No one really liked the factory Gen I stocks.

Click to expand...

I wasted no time in putting a Teryx stock on mine. That stock was better for clubbing seals.

We are about a month away from the State shoot with a lot of folks asking about this, soooooo........

I thought I would resurrect the post, seeing as it was hidden some 23 pages back.

Please check the club website, www.airgunnersofarizona.org for match information and registration.

Obviously, respond here if you want to chat about it.

Nem beseliek Magyarul. A hearty welcome from an American of Hungarian extraction. My dad and uncle would cuss in Hungarian, that and DuoLingo are my only exposures to the language.

Mike

Back in the late 80’s I was in a heavy metal band and we were fortunate enough to open up for Black Sabbath on their European Tour. ozzy wasn’t in the band then.
but I had many conversation with Toni…. What a great experience it was……lots of stores about there younger day!!
toni was a class act

Ezana4CE said:

@RoosterCogburn I think there’s been some confusion here. Look at the title. the OP’s talking about a big bore air rifle capable of 700+ FPE. It sounds as if you’re talking about a small-bore projectile. The numbers quoted above don’t add up.

Click to expand...

I think you're right, I saw piledriver and i think i automatically assumed he meant pellet i'm 39 going on 98

Its apparently a common failure, because a have a retired Hatsan 95QE wall hanger, and I was contacted and asked for one part from it. They didn't care for anything else from it.

cosmic said:

Anyone have one and maybe they can do a mini review...

Click to expand...

What do you want to know? Or do you want some? For some reason i get WAY more energy from them than i do with 21gr .178 slugs.

I can shoot 21gr wildmans at 880, meanwhile i shoot the 20.99gr piledriver at 930fps, thats 40.3 foot pounds from a .177

from my unchoked 600mm CZ barrel they're pretty damn accurate. Maybe 1/2 at 50, 3/4" at 70


edit: Over penetration is thy name. they hit hard, but they do not stop.

Mycapt65 said:

I shot this page of 20 targets this afternoon in an Arkansas heat wave. Its 5 shots at 25 yards holding the rifle while seated at a bench. 18 almost a 19th can be covered with a dime ctc. Here's the whole page. No cherry picking here.

View attachment 580255

View attachment 580256

Click to expand...

Good shooting Ron.

Showme said:

I'm leaning to the CS4-i. The JTS fan won't turn off unless I unplug the unit. Started this after a brief night time power outage. It was working fine prior. I went downstairs and hurt a noice and it turned out to be the fan on the unit running, switch was of course off. Compressor seems to work put now it must be unplugged to turn off fan.

Click to expand...

Try sending an email to GX Compressor ( [email protected] ) and ask support if they will help. It sounds as if the 'control board' in your unit is failing and this $20- part (https://gxpumpofficial.com/collections/accessories/products/cs4-cs4-i-circuit-board ) may be the repair piece you need.

You could also try sending Bill at TargetForge.net ( https://targetforge.net/contact-us ) and email to learn what he thinks of your compressor situation.

just go down this page and there is a mod video

Ydunn.223 said:

Are they still using the TJ barrels

In 25 cal the TJ 1:22 twist and
In 30 cal the TJ 1:26 twist barrel

Click to expand...

I believe they are still using TJ

This listing has been renewed

beerthief said:

I assume this is a elbow's rested on the bench holding the rifle in your hands ?

Click to expand...

Yes exactly. I will add that you'll usually see a 6x6 and shooting bag in my bench photos. I hold the rifle in my hands and use the 6x6 and bag to steady my left forearm or wrist. I'm always holding the rifle and my elbows are always on the bench.

I don't like resting a rifle because a rifle's zero will change if you shoot any other way. That can cause missed shots at critters when not rested.

I zero a rifle the way it'll be used the most. If I always hold the rifle, I'll always be in the ball park. I may be able to get better groups on a rest but I'd rather not deal with a drastically changing zero.

Be well,
Ron

well yes, the broken piece will need to be found or at least search for
call them up and get the part and or 2 or 3 there
this part is in so many rifles

Ratzy said:

Armada is overpriced as far as I am concerned.

Click to expand...

Thanks

Max is 2000 in book but Umarex said 3000 , so I imagine maybe more , but when I did try 3 it was lowering my fps.
The hammer has to work in harmony with the reg pressure as well , and anything over 5 turns in lost fps as well. For my careful power tune
2,900 max reg , and 5 turns in on hammer spring working together got me to an average of 900 fps with a 20 shot average.. High 907.2 low 895.3
First 10 only 2 went over 900 last 10 all over 900. Had 1 duplicate at 901.5. Today later I'm to try some 25.4g pellets and see how fast with that power tune. OV.

Just a follow up to clarify for any misleading info, the gun is shooting great again, the culprit was the quick connect on the behemoth moderator, I had applied son grease for easy removal and at the same time some purple loctite on the adapter thread because I was having the issue of unthreading the adapter when I try to disconnect the moderator. So today I noticed that the behemoth moderator was coming ever so slightly loose and that was causing the widening of the groups and poI shift. Cleaned up the quick connect. Made sure the moderator was tight after every mag and things are looking good again. Thanks everyone and apologies the misleading info.

I had the opportunity to shoot outside at 50 yards today. Instead of my usual prone position, I shot from a bench. About 12 shots on this particular target

FX Crown MK2 .25
Rangemaster Emperor 33.95

i think uniformity plays a role. i used to shoot 17.5gr nsa slugs out of the notos with great accuracy. then i got a bad batch of them there were excess lead on the tips and inside the cavity. these were all over the place. apolo slugs we the only slugs that jammed up my huben k1. they shot okay for looking the way they did but i stopped shooting them after it jammed my gun.